Explainable Artificial Intelligence to Predict the Water Status of Cotton ( L., 1763) from Sentinel-2 Images in the Mediterranean Area.

Climate change and water scarcity bring significant challenges to agricultural systems in the Mediterranean region. Novel methods are required to rapidly monitor the water stress of the crop to avoid qualitative losses of agricultural products. This study aimed to predict the stem water potential of cotton ( L.

Do poplar plantations enhance organic carbon stocks in arable soils? A comprehensive study from Northern Italy.

Soil organic carbon (SOC) depletion, primarily driven by land use change, is a global challenge influenced by factors such as climate, plant cultivation, and adopted management practices. Poplar plantations (PP), predominantly used for plywood and bioenergy production in the Mediterranean, have shown carbon (C) potential capture as biomass. However, their contribution to SOC and climate change mitigation remains understudied.

L. var. L. Landrace "Carciofo Ortano" as a Source of Bioactive Compounds.

The preservation of agricultural biodiversity and socioeconomic development are relevant both to enhance domestic production and to support innovation. In the search for new biomolecules, we have focused on the "Carciofo Ortano" landrace, growth in the northern part of the Lazio region. Artichoke cultivation generates substantial by-products, including leaves, stems, and roots, which could serve as valuable sources of biomolecules and prebiotic dietary fiber.

Extraction and Characterization of Acidolysis Lignin from Turkey Oak ( L.) and Eucalypt ( Dehnh.) Wood from Population Stands in Italy.

Acidolysis lignins from the species L. and Dehnh. were isolated and characterized using high pressure size exclusion chromatography (HP-SEC), Fourier-transform (FTIR) infrared spectroscopy, analytical pyrolysis-gas chromatography-mass spectrometry (Py-GCMS), and two-dimensional heteronuclear single quantum coherence (2D HSQC) NMR spectroscopy.

Morphological, Molecular, and Nutritional Characterisation of the Globe Artichoke Landrace "Carciofo Ortano".

The present study focused on the molecular, morphological, and nutritional characterisation of a globe artichoke landrace at risk of genetic erosion still cultivated in the municipality of Orte (Lazio Region, Central Italy) and therefore named "Carciofo Ortano". Molecular analysis based on SSR and ISSR markers was carried out on 73 genotypes selected at random from 20 smallholdings located in the Orte countryside and 17 accessions of landraces/clones belonging to the main varietal types cultivated in Italy. The results confirmed that "Carciofo Ortano" belongs to the "Romanesco" varietal typology and revealed the presence within the landrace of two distinct genetic populations named Orte 1 and Orte 2.

Synthesis and Characterizations of Eco-Friendly Organosolv Lignin-Based Polyurethane Coating Films for the Coating Industry.

Three different formulations of bio-based polyurethane (PU), varying the weight ratio between Organosolv lignin and a commercial isocyanate, were synthesized. The coating formulations were characterized by SEM, pyrolysis-GC/MS, FTIR spectroscopy and FTIR mapping, which confirmed the successful formation of urethane bonds between commercial isocyanate and hydroxyl groups deriving from lignin. The coatings were applied on beech wood samples to measure color and contact angles, and eventually FTIR mapping of the coated wood samples was performed.

Impact of Bio-Based (Tannins) and Nano-Scale (CNC) Additives on Bonding Properties of Synthetic Adhesives (PVAc and MUF) Using Chestnut Wood from Young Coppice Stands.

Sustainability and ecotoxicity issues call for innovations regarding eco-friendly adhesives in the production of biocomposite wood materials, and solutions involving nano-scale and bio-based compounds represent a valid and promising target. One possible approach is to increase the performance of adhesives such as polyvinyl acetate (PVAc) or melamine-urea-formaldehyde (MUF) by means of nanoparticles in order to obtain a material with better mechanical and environmental resistance. When applying cellulose-based nanoparticles or tannin, the concept of a circular economy is successfully implemented into the forest/wood value chain, and chances are created to develop new value chains using byproducts of forestry operations.

Preparation of Lignin Nanoparticles with Entrapped Essential Oil as a Bio-Based Biocide Delivery System.

Lignin isolated from beech sawdust was used for the preparation of lignin nanoparticles (LNPs) with entrapped essential oil (EO) from cinnamon bark ( Blume), common thyme ( L.), and wild thyme ( L.) using a fast antisolvent method.

Long-term study of a subdioecious Populus ×canescens family reveals sex lability of females and reproduction behaviour of cosexual plants.

Cosexual Populus ×canescens plants are inconstant females with life course plasticity of sex phenotype and can reproduce by selfing. Populus species are dioecious, but deviations from dioecy are reported in some cases. The objectives of this study were to investigate the phenotypic expression and the inheritance of subdioecy in a Populus ×canescens pedigree.

Accelerating Climate Resilient Plant Breeding by Applying Next-Generation Artificial Intelligence.

Breeding crops for high yield and superior adaptability to new and variable climates is imperative to ensure continued food security, biomass production, and ecosystem services. Advances in genomics and phenomics are delivering insights into the complex biological mechanisms that underlie plant functions in response to environmental perturbations. However, linking genotype to phenotype remains a huge challenge and is hampering the optimal application of high-throughput genomics and phenomics to advanced breeding.

Identification of Resistance Genes and Response to Arsenic in BCP1.

Arsenic (As) ranks among the priority metal(loid)s that are of public health concern. In the environment, arsenic is present in different forms, organic or inorganic, featured by various toxicity levels. Bacteria have developed different strategies to deal with this toxicity involving different resistance genetic determinants.

Preparation of Lignin Nanoparticles from Wood Waste for Wood Surface Treatment.

Lignin was isolated from wood wastes comprising Iroko sawdust (IR) and mixed sawdust from Iroko and Norway spruce (IRNS), furnished by a local wood houses producer. The respective acidolysis lignin fractions were structurally characterized using pyrolysis (Py)-GCMS, two-dimensional heteronuclear single quantum correlation nuclear magnetic resonance (2D HSQC NMR), Fourier-transform infrared FTIR and ultraviolet-visible (UV-VIS) spectroscopies, size exclusion chromatography, and standard wet-chemistry methods for Klason lignin and polysaccharides determination. The isolated lignin fractions were subsequently used for the preparation of lignin nanoparticles (LNPs) using a non-solvent method.

Electrospinning of Polystyrene/Polyhydroxybutyrate Nanofibers Doped with Porphyrin and Graphene for Chemiresistor Gas Sensors.

Structural and functional properties of polymer composites based on carbon nanomaterials are so attractive that they have become a big challenge in chemical sensors investigation. In the present study, a thin nanofibrous layer, comprising two insulating polymers (polystyrene (PS) and polyhydroxibutyrate (PHB)), a known percentage of nanofillers of mesoporous graphitized carbon (MGC) and a free-base tetraphenylporphyrin, was deposited onto an Interdigitated Electrode (IDE) by electrospinning technology. The potentials of the working temperature to drive both the sensitivity and the selectivity of the chemical sensor were studied and described.

Thermally Driven Selective Nanocomposite PS-PHB/MGC Nanofibrous Conductive Sensor for Air Pollutant Detection.

The potentials to use the working temperature to tune both the sensitivity and the selectivity of a chemical sensor based on a nanostructured and nanocomposite polymer layer have been investigated and described. Thus, in a single step, a peculiar chemical layer was grown up onto IDE (Interdigitated Electrode) microtransducers by electrospinning deposition and using a single-needle strategy. The 3-component nanofibers, obtained from a mixture of polystyrene and polyhydroxibutyrate (insulating thermoplastics) and a known concentration of mesoporous graphitized carbon nanopowder, appeared highly rough on the surface and decorated with jagged islands but homogeneous in shape and diameter, with the nanofillers aggregated into clusters more or less densely packed through the fibers.

Isolation of Mesophyll Protoplasts from Mediterranean Woody Plants for the Study of DNA Integrity under Abiotic Stress.

Abiotic stresses have considerable negative impact on Mediterranean plant ecosystems and better comprehension of the genetic control of response and adaptation of trees to global changes is urgently needed. The single cell gel electrophoresis (SCGE) assay could be considered a good estimator of DNA damage in an individual eukaryotic cell. This method has been mainly employed in animal tissues, because the plant cell wall represents an obstacle for the extraction of nuclei; moreover, in Mediterranean woody species, especially in the sclerophyll plants, this procedure can be quite difficult because of the presence of sclerenchyma and hardened cells.

Prediction of shallow landslide occurrence: Validation of a physically-based approach through a real case study.

In recent years, physically-based numerical models have frequently been used in the framework of early-warning systems devoted to rainfall-induced landslide hazard monitoring and mitigation. For this reason, in this work we describe the potential of SLIP (Shallow Landslides Instability Prediction), a simplified physically-based model for the analysis of shallow landslide occurrence. In order to test the reliability of this model, a back analysis of recent landslide events occurred in the study area (located SW of Messina, northeastern Sicily, Italy) on October 1st, 2009 was performed.

Structure and Evolution of Mediterranean Forest Research: A Science Mapping Approach.

This study aims at conducting the first science mapping analysis of the Mediterranean forest research in order to elucidate its research structure and evolution. We applied a science mapping approach based on co-term and citation analyses to a set of scientific publications retrieved from the Elsevier's Scopus database over the period 1980-2014. The Scopus search retrieved 2,698 research papers and reviews published by 159 peer-reviewed journals.

Phenotypic plasticity, QTL mapping and genomic characterization of bud set in black poplar.

Background: The genetic control of important adaptive traits, such as bud set, is still poorly understood in most forest trees species. Poplar is an ideal model tree to study bud set because of its indeterminate shoot growth. Thus, a full-sib family derived from an intraspecific cross of P.

Accelerating the domestication of forest trees in a changing world.

In light of impending water and arable land shortages, population growth and climate change, it is more important than ever to examine how forest tree domestication can be accelerated to sustainably meet future demands for wood, biomass, paper, fuel and biomaterials. Because of long breeding cycles, tree domestication cannot be rapidly achieved through traditional genetic improvement methods alone. Integrating modern genetic and genomic techniques with conventional breeding will expedite tree domestication.

Mechanisms governing the responses to anthracnose pathogen in Juglans spp.

Juglans nigra and Juglans regia are two highly economically important species for wood and fruit production that are susceptible to anthracnose caused by Gnomonia leptostyla. The identification of genotypes resistant to anthracnose could represent a valid alternative to agronomic and chemical management. In this study, we analyzed 72 walnut genotypes that showed a variety of resistance phenotypes in response to natural infection.

Bio-energy retains its mitigation potential under elevated CO2.

Background: If biofuels are to be a viable substitute for fossil fuels, it is essential that they retain their potential to mitigate climate change under future atmospheric conditions. Elevated atmospheric CO2 concentration [CO2] stimulates plant biomass production; however, the beneficial effects of increased production may be offset by higher energy costs in crop management.

Methodology/main Findings: We maintained full size poplar short rotation coppice (SRC) systems under both current ambient and future elevated [CO2] (550 ppm) and estimated their net energy and greenhouse gas balance.

Soil [N] modulates soil C cycling in CO2-fumigated tree stands: a meta-analysis.

Under elevated atmospheric CO(2) concentrations, soil carbon (C) inputs are typically enhanced, suggesting larger soil C sequestration potential. However, soil C losses also increase and progressive nitrogen (N) limitation to plant growth may reduce the CO(2) effect on soil C inputs with time. We compiled a data set from 131 manipulation experiments, and used meta-analysis to test the hypotheses that: (1) elevated atmospheric CO(2) stimulates soil C inputs more than C losses, resulting in increasing soil C stocks; and (2) that these responses are modulated by N.

Response and potential of agroforestry crops under global change.

The use of agroforestry crops is a promising tool for reducing atmospheric carbon dioxide concentration through fossil fuel substitution. In particular, plantations characterised by high yields such as short rotation forestry (SRF) are becoming popular worldwide for biomass production and their role acknowledged in the Kyoto Protocol. While their contribution to climate change mitigation is being investigated, the impact of climate change itself on growth and productivity of these plantations needs particular attention, since their management might need to be modified accordingly.

Coppicing shifts CO2 stimulation of poplar productivity to above-ground pools: a synthesis of leaf to stand level results from the POP/EUROFACE experiment.

A poplar short rotation coppice (SRC) grown for the production of bioenergy can combine carbon (C) storage with fossil fuel substitution. Here, we summarize the responses of a poplar (Populus) plantation to 6 yr of free air CO(2) enrichment (POP/EUROFACE consisting of two rotation cycles). We show that a poplar plantation growing in nonlimiting light, nutrient and water conditions will significantly increase its productivity in elevated CO(2) concentrations ([CO(2)]).

Isoprene emission rates under elevated CO2 and O3 in two field-grown aspen clones differing in their sensitivity to O3.

Isoprene is the most important nonmethane hydrocarbon emitted by plants. The role of isoprene in the plant is not entirely understood but there is evidence that it might have a protective role against different oxidative stresses originating from heat shock and/or exposure to ozone (O(3)). Thus, plants under stress conditions might benefit by constitutively high or by higher stress-induced isoprene emission rates.