Argyreia nervosa-driven biosynthesis of Cu-Ag bimetallic nanoparticles from plant leaves extract unveils enhanced antibacterial properties.

Our study specifically explores the biosynthesis of copper-silver bimetallic nanoparticles (Cu-Ag BMNPs) using Argyreia nervosa (AN) plant leaf green extract as a versatile agent for capping, reducing, and stabilizing. This biosynthesis method is characterized by its simplicity and cost-effectiveness, utilizing silver nitrate (AgNO) and cupric oxide (CuO) as precursor materials. Our comprehensive characterization of the Cu-Ag BMNPs, employing techniques such as X-ray diffraction (XRD), UV-Vis spectrometry, scanning electron microscopy (SEM), Zetasizer, and Fourier transformed infrared spectrometry (FTIR).

Strategic Compositional Engineering in Quasi-2D Ruddlesden-Popper Perovskites to Decipher Deep Blue Emission.

Perovskites have achieved immense progression in optoelectronic device applications owing to their fascinating intrinsic properties. However, the integration of perovskites in lighting applications has been retarded due to the challenges involved in achieving their deep blue light-emitting diodes (LEDs). Unlike other color counterparts, obtaining a stable, defect-tolerant, and high-band gap perovskite material for deep blue emission is an arduous task.

growth of laser-induced graphene micro-patterns on arbitrary substrates.

In this article we report a new laser processing method, combining the graphitization of polyimide with simultaneous transfer of the graphene patterns to arbitrary substrates. The synthesis conditions are similar to those normally used for the well-known laser-induced graphene method. The approach is based on the enclosure of polyimide sheets between microscope glass slides.

High-Resolution Magic-Angle Spinning NMR Spectroscopy for Evaluation of Cell Shielding by Virucidal Composites Based on Biogenic Silver Nanoparticles, Flexible Cellulose Nanofibers and Graphene Oxide.

Antiviral and non-toxic effects of silver nanoparticles onto cells infected with coronavirus were evaluated in this study using High-Resolution Magic-Angle Spinning Nuclear Magnetic Resonance (HR-MAS NMR) spectroscopy. Silver nanoparticles were designed and synthesized using an orange flavonoid-hesperetin (HST)-for reduction of silver(I) and stabilization of as obtained nanoparticles. The bio-inspired process is a simple, clean, and sustainable way to synthesize biogenic silver nanoparticles (AgNP@HST) with diameters of ∼20 nm and low zeta potential (-40 mV), with great colloidal stability monitored for 2 years.

Raman spectra of multilayer graphene under high temperatures.

For graphitic materials, Raman technique is a common method for temperature measurements through analysis of phonon frequencies. Temperature () induced downshift of the bond-stretching G mode (ΔG) is well known, but experimentally obtained thermal coefficients ΔG/Δvary considerably between diverse works. Further, ΔG/ΔT coefficients usually were evaluated for relatively low temperatures and found to differ strongly for mono, a few and multilayer graphene.

Multilayer graphene nanobelts on SWCNT films for high current interconnect applications.

In this work we propose multilayer graphene (MLG) nanobelts for high current interconnections with single wall carbon nanotubes (SWCNT) and compare these with metal contacts. MLG contacts were directly printed on the SWCNT, without any additional metal parts, demonstrating the possibility to use these materials as interconnections in microelectronics. Different work function metals Al, Ti and Pd were probed for the lowest contact resistance with the SWCNT.

Microwave-assisted synthesis of palladium nanoparticles intercalated nitrogen doped reduced graphene oxide and their electrocatalytic activity for direct-ethanol fuel cells.

Palladium nanoparticles decorated reduced graphene oxide (Pd-rGO) and palladium nanoparticles intercalated inside nitrogen doped reduced graphene oxide (Pd-NrGO) hybrids have been synthesized by applying a very simple, fast and economic route using microwave-assisted in-situ reduction and exfoliation method. The Pd-NrGO hybrids materials show good activity as catalyst for ethanol electro oxidation for direct ethanol fuel cells (DEFCs) as compared to Pd-rGO hybrids. The enhanced direct ethanol fuel cell can serve as alternative to fossil fuels because it is renewable and environmentally-friendly with a high energy conversion efficiency and low pollutant emission.

Direct laser writing of micro-supercapacitors on thick graphite oxide films and their electrochemical properties in different liquid inorganic electrolytes.

In this article we demonstrate a simple approach to fabricate interdigitated in-plane electrodes for flexible micro-supercapacitors (MSCs). A nanosecond ultraviolet laser treatment is used to reduce and pattern the electrodes on thick graphite oxide (GO) freestanding films. These laser-treated regions obtained by direct writing provide the conducting channels for electrons in the capacitors.

Self-Assembled and One-Step Synthesis of Interconnected 3D Network of FeO/Reduced Graphene Oxide Nanosheets Hybrid for High-Performance Supercapacitor Electrode.

In the present work, we have synthesized three-dimensional (3D) reduced graphene oxide nanosheets (rGO NSs) containing iron oxide nanoparticles (FeO NPs) hybrids (3D FeO/rGO) by one-pot microwave approach. Structural and morphological studies reveal that the as-synthesized FeO/rGO hybrids were composed of faceted FeO NPs induced into the interconnected network of rGO NSs. The morphologies and structures of the 3D hybrids have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectrometer (XPS).

A wearable, highly stable, strain and bending sensor based on high aspect ratio graphite nanobelts.

A simple and scalable method was developed for the fabrication of wearable strain and bending sensors, based on high aspect ratio (length/thickness ∼10(3)) graphite nanobelt thin films deposited by a modified Langmuir-Blodgett technique onto flexible polymer substrates. The sensing mechanism is based on the changes in contact resistance between individual nanobelts upon substrate deformation. Very high sensor response stability for more than 5000 strain-release cycles and a device power consumption as low as 1 nW were achieved.

A modern minimally invasive transcallosal approach to the third ventricle. A personal experience of 30 patients.

Introduction: Expansive processes around the third ventricle have always been a major neurosurgical challenge. Despite all the technological and scientific progress recorded over the last few years, third ventricle tumors are still a very difficult pathology to approach due to their formidable complexity.Treating such a tumor demands a good knowledge of local anatomy, pathophysiology, pathology and a good capacity to integrate all the data gathered from the patient prior to and during surgery.

Interference of apoptosis in the pathophysiology of subarachnoid hemorrhage.

Programmed cell death is crucial for the correct development of the organism and the clearance of harmful cells like tumor cells or autoreactive immune cells. Apoptosis is initiated by the activation of cell death receptors and in most cases it is associated with the activation of the cysteine proteases, which lead to apoptotic cell death. Cells shrink, chromatin clumps and forms a large, sharply demarcated, crescent-shaped or round mass; the nucleus condenses, apoptotic bodies are formed and eventually dead cells are engulfed by a neighboring cell or cleared by phagocytosis.

Micro-reactors for characterization of nanostructure-based sensors.

Fabrication and testing of micro-reactors for the characterization of nanosensors is presented in this work. The reactors have a small volume (100 μl) and are equipped with gas input/output channels. They were machined from a single piece of kovar in order to avoid leaks in the system due to additional welding.

Thermal evaporation furnace with improved configuration for growing nanostructured inorganic materials.

A tubular furnace specifically designed for growing nanostructured materials is presented in this work. The configuration allows an accurate control of evaporation temperature, substrate temperature, total pressure, oxygen partial pressure, volumetric flow and source-substrate distance, with the possibility of performing both downstream and upstream depositions. In order to illustrate the versatility of the equipment, the furnace was used for growing semiconducting oxide nanostructures under different deposition conditions.

Resistive-switching behavior in polycrystalline CaCu(3)Ti(4)O(12) nanorods.

Highly aligned CaCu(3)Ti(4)O(12) nanorod arrays were grown on Si/SiO(2)/Ti/Pt substrates by radio-frequency sputtering at a low deposition temperature of 300 °C and room temperature. Structural and morphological studies have shown that the nanostructures have a polycrystalline nature and are oriented perpendicular to the substrate. The high density of grain boundaries in the nanorods is responsible for the nonlinear current behavior observed in these arrays.