Mechanical properties of modern restorative "bioactive" dental materials - an in vitro study.

This study aimed at assessing the mechanical properties and degradation of commercial bioactive materials. The bioactive materials (Activa Bioactive Restorative, Beautifil Flow Plus F00, F03, Predicta Bulk Bioactive) and composite resin Filtek Supreme Flow were submitted to flexural and diametral tensile strength tests (FS, DTS), modulus of elasticity (ME) evaluation, and analysis of aging in 70% ethanol and saliva on their hardness and sorption. The results for DTS ranged from 33.

Remineralisation of mineral-deficient dentine induced by experimental ion-releasing materials in combination with a biomimetic dual-analogue primer.

Objectives: Evaluate the remineralisation ability of experimental resin-based materials containing Fluoride-Doped Calcium Phosphate (FDCP), applied in mineral-deficient dentine in combination with a biomimetic dual-analogue primer.

Methods: Artificial dentine carious lesions were created in occlusal cavities of human molars. An experimental resin-based adhesive and flowable composite, containing FDCP (10wt% and 20wt%, respectively), were applied (±) with a biomimetic primer containing polyacrylic acid and sodium tripolyphosphate.

The Influence of Wind Musical Instruments on the Orofacial System.

Objectives: The main objective of this study was to assess whether there are differences in the muscular and occlusal levels between wind players and the general population, in addition to assessing the different repercussions depending on the embouchure type.

Material And Methods: Two cohorts were chosen: one of them comprised intermediate students related to the practice of a wind instrument (n = 39), and the other one, harmonized with the former, comprised secondary students that served as a control group (n = 19). Overjet, overbite, presence of lip abrasion and/or erosion, Angle's molar class, Little's irregularity index, dental abrasion, presence of labial herpes, presence of tooth sensitivity, and presence of articular noises muscle pain were evaluated.

Biocompatibility and osteogenic assessment of experimental fluoride-doped calcium-phosphate cements on human dental pulp stem cells.

Objectives: This study investigated the impact of some specific experimental calcium phosphate cements doped with different fluoride salts (FDCPCs) concentrations on the basal functions of human Dental Pulp Stem Cells (hDPSCs). Furthermore, this study also examined the migration, as well as the mineralisation through osteogenic differentiation.

Methods: Experimental FDCPCs were formulated using different concentrations of calcium/sodium fluoride salts [(5 wt%: VS5F), (10 wt%: VS10F), (20 wt%: VS20F)].

Effect of multi-layer applications of self-etch universal bonding agents on the adhesion of resin composite to enamel.

To evaluate the effect of adhesive coats application on the enamel microtensile bond strength (µTBS) of universal adhesives, morphological etching pattern and their chemical interaction with hydroxyapatite (HA). Two universal adhesives were investigated: Scotchbond Universal (SBU, 3 M) and Prime&Bond Universal (PBU, Dentsply). The adhesives were applied in self-etching mode on bovine enamel (n = 8) in one (1L), two (2L) or three coats (3L) and light-cured as per manufacturers' instructions.

Effect of gastric acids on the mechanical properties of conventional and CAD/CAM resin composites - An in-vitro study.

Objectives: Dental erosion in patients with gastroesophageal reflux disease (GERD) is a current and frequent condition that may compromise the mechanical properties and clinical durability of resin-based composites (RBCs). This study assessed the mechanical properties of conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) RBCs subsequent to simulated gastric acid aging.

Materials And Method: Three conventional and three CAD/CAM composites were assessed.

Preventive management of carious lesions: from non-invasive to micro-invasive operative interventions.

Understanding that dental carious lesions occur as a result of the action of micro-organisms in the dental plaque biofilm, where demineralisation on the tooth surface is the first sign of the disease, such incipient lesions can be treated using preventive, non-operative and minimally invasive operative dentistry. If the caries process is left unmanaged, the lesions progress towards cavitation, leading to more invasive treatments. This article discusses the principles of preventive, non-invasive and micro-invasive treatments of early carious lesions, outlining the clinical situations where these therapies can be applied.

Characterisation of experimental flowable composites containing fluoride-doped calcium phosphates as promising remineralising materials.

Objective: Remineralising composites with antibacterial properties may seal the cavity and prevent secondary caries. This study aimed at developing experimental flowable composites containing different concentrations of fluoride-doped calcium phosphate fillers and evaluating their remineralising and antibacterial properties.

Methods: Experimental resin-based composites containing different concentrations (0-20 %) of fluoride-doped calcium phosphate fillers (VS10/VS20) were formulated.

Dentine Remineralisation Induced by "Bioactive" Materials through Mineral Deposition: An In Vitro Study.

This study aimed to assess the ability of modern resin-based "bioactive" materials (RBMs) to induce dentine remineralisation via mineral deposition and compare the results to those obtained with calcium silicate cements (CSMs). The following materials were employed for restoration of dentine cavities: CSMs: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), and TheraCal LC (Bisco); RBMs: ACTIVA BioACTIVE Base/Liner (Pulpdent), ACTIVA Presto (Pulpdent), and Predicta Bioactive Bulk (Parkell). The evaluation of the mineral deposition was performed through scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) on the material and dentine surfaces, as well as at the dentine-material interface after immersion in simulated body fluid.

Bonding performance and interfacial adaptation of modern bulk-fill restorative composites after aging in artificial saliva: an in vitro study.

Objectives: This study aimed at comparing the microtensile bond strength (MTBS) and interfacial adaptation of a modern self-curing and a light-curing restorative bulk-fill composite to a conventional composite applied with the layering technique.

Methods: Forty-eight occlusal cavities were divided in three main groups (16/group) based on tested materials: (i) STELA, bulk-fill self-curing restorative (STELA, SDI Ltd.); (ii) 3 M-BULK, bulk-fill composite (Filtek One Bulk-Fill, 3 M Oral Care); and (iii) 3 M-CTR, a conventional composite (Filtek Supreme XTE, 3 M Oral Care).

The Influence of Indirect Bonding Technique on Adhesion of Orthodontic Brackets and Post-Debonding Enamel Integrity-An In Vitro Study.

The increasing demand for orthodontic treatments due to the high prevalence of malocclusion has inspired clinicians and material scientists to investigate innovative, more effective, and precise bonding methods with reduced chairside time. This study aimed at comparing the shear bond strength (SBS) of metal and ceramic brackets bonded to enamel using the indirect bonding technique (IDB). Victory Series metal brackets (Metal-OPC, Metal-APC) and Clarity™ Advanced ceramic brackets (Ceramic-OPC) (3M Unitek, Monrovia, CA, USA) were bonded indirectly to extracted human premolars through the etch-and-rinse technique.

Shear Bond Strength of Metal and Ceramic Brackets Depending on Etching Protocol in Direct Bonding Technique.

Successful orthodontic therapy, apart from a proper treatment plan, depends on optimal bracket-enamel adhesion. Among numerous factors affecting adhesion, the type of bracket and preparation of the tooth's surface are crucial. The aim of this study was to compare the shear bond strength (SBS) of metal and ceramic brackets to the enamel's surface using direct bonding.

Total Rehabilitation Using Adhesive Dental Restorations in Patients with Severe Tooth Wear: A 5-Year Retrospective Case Series Study.

Introduction: Currently, there is little clinical evidence to support the medium- and long-term survival and clinical performance of ultraconservative approaches using adhesive restorations in full-mouth restorations. The aim of this case series study was to evaluate the medium-term clinical performance of anterior and posterior adhesive restorations applied with direct and indirect techniques using resin composites and glass-ceramic-based materials.

Materials And Methods: The inclusion criteria were an esthetic problem as the main reason for consultation and severe generalized wear of grade 2 to 4 according to the Tooth Wear Evaluation System (TWES 2.

Release Kinetics of Monomers from Dental Composites Containing Fluoride-Doped Calcium Phosphates.

This study analyse the type of release kinetic of specific monomers from dental resin composites containing various fluoride-doped calcium phosphates. The release behavior of urethane dimethacrylate (UDMA), ethoxylated bisphenol-A dimethacrylate (bis-EMA) and 1.6-hexanediol ethoxylate diacrylate (HEDA) was evaluated over a period of 35 days.

Micro-CT Evaluation of Microgaps at Implant-Abutment Connection.

The assessment of microgaps at the implant-abutment interface is an important factor that may influence clinical success. Thus, the aim of this study was to evaluate the size of microgaps between prefabricated and customised abutments (Astra Tech, Dentsply, York, PA, USA; Apollo Implants Components, Pabianice, Poland) mounted on a standard implant. The measurement of the microgap was performed using micro-computed tomography (MCT).

Bioactive Restorative Materials Applied over Coronal Dentine-A Bibliometric and Critical Review.

The objective of the research was to examine the scientific literature concerning restorative materials with bioactive properties for the purpose of covering dentin. Searches were performed in various databases including MEDLINE, Scopus, Web of Science, Cochrane Library, Lilacs/BBO, and Embase. Inclusion criteria involved studies that utilized the terms "dentin" and "bioactive", along with "ion-releasing", "smart materials", "biomimetic materials" and "smart replacement for dentin".

Experimental Composite Resin with Myristyltrimethylammonium Bromide (MYTAB) and Alpha-Tricalcium Phosphate (α-TCP): Antibacterial and Remineralizing Effect.

The aim of this study was to develop an experimental composite resin with the addition of myristyltrimethylammonium bromide (MYTAB) and α -tricalcium phosphate (α-TCP) as an antibacterial and remineralizing material. Experimental composite resins composed of 75 wt% Bisphenol A-Glycidyl Methacrylate (BisGMA) and 25 wt% Triethylene Glycol Dimethacrylate (TEGDMA) were produced. Some 1 mol% Trimethyl benzoyl-diphenylphosphine oxide (TPO) was used as a photoinitiator, and butylated hydroxytoluene (BTH) was added as a polymerization inhibitor.

Evaluation of Physical-Chemical Properties of Contemporary CAD/CAM Materials with Chromatic Transition "Multicolor".

The use of materials for computer-aided design/computer-aided manufacturing (CAD/CAM) has been rapidly increasing in daily practice. However, one of the main issues regarding modern CAD/CAM materials is their aging in the oral environment, which may lead to significant changes in their overall properties. The aim of this study was to compare the flexural strength, water sorption, cross-link density (softening ratio%), surface roughness, and SEM analysis of three modern CAD/CAM "multicolor" composites.

Autologous Tooth Graft: Innovative Biomaterial for Bone Regeneration. Tooth Transformer and the Role of Microbiota in Regenerative Dentistry. A Systematic Review.

Different biomaterials, from synthetic products to autologous or heterologous grafts, have been suggested for the preservation and regeneration of bone. The aim of this study is to evaluate the effectiveness of autologous tooth as a grafting material and examine the properties of this material and its interactions with bone metabolism. PubMed, Scopus, Cochrane Library, and Web of Science were searched to find articles addressing our topic published from 1 January 2012 up to 22 November 2022, and a total of 1516 studies were identified.

Chemical, structural and cytotoxicity characterisation of experimental fluoride-doped calcium phosphates as promising remineralising materials for dental applications.

Objectives: This study aimed at evaluating the cytotoxicity, chemical and structural properties of experimental fluoride-doped calcium-phosphates as potential remineralising materials for dental applications.

Methods: Experimental calcium phosphates were formulated using β-tricalcium phosphate, monocalcium phosphate monohydrate, calcium hydroxide, and different concentrations of calcium/sodium fluoride salts [(5 wt%: VSG5F), (10 wt%: VSG10F), (20 wt%: VSG20F)]. A fluoride-free calcium phosphate (VSG) was used as control.

Impact of silanization of different bioactive glasses in simplified adhesives on degree of conversion, dentin bonding and collagen remineralization.

Objective: To analyze simplified adhesive containing pure or silanized bioglass 45S5 (with calcium) or Sr-45S5 (strontium-substituted) fillers applied on dentin and to evaluate the microtensile bond strength (µTBS), interface nanoleakage, degree of conversion of adhesive, collagen degradation and remineralization.

Methods: Ambar Universal adhesive (FGM) was doped with 10 wt% bioactive glasses to form following groups: Control (no bioglass), 45S5 (conventional bioglass 45S5), Sr-45S5 (Sr-substituted bioglass 45S5), Sil-45S5 (silanized bioglass 45S5) and Sil-Sr-45S5 (silanized bioglass Sr-45S5). Adhesives were applied after dentin acid-etching using phosphoric acid at extracted human molars.

Tooth Complications after Orthodontic Miniscrews Insertion.

Orthodontic miniscrews (OM) are widely used in modern orthodontic clinical practice to improve skeletal anchorage and have a high safety profile. A complication at the time of OM insertion is tooth root perforation or periodontal ligament trauma. Rarely, OM injury can cause permanent damage, such as ankylosis, osteosclerosis, and loss of tooth vitality.

Tinnitus Prevalence and Associated Factors among Dental Clinicians in the United Arab Emirates.

Dental clinicians are at increased risk for developing tinnitus due to exposure to high levels of occupational noise. This study aimed to determine tinnitus prevalence and associated factors among dental clinicians. Interviews were conducted with 150 randomly selected dental clinicians using a questionnaire.