RETRACTED: Bas et al. Embedded Sensors with 3D Printing Technology: Review. 2024, , 1955.

The Editorial Office retracts the article, "Embedded Sensors with 3D Printing Technology: Review" [...

Flexible and wearable electronic systems based on 2D hydrogel composites.

Flexible electronics is a rapidly developing field of study, which integrates many other fields, including materials science, biology, chemistry, physics, and electrical engineering. Despite their vast potential, the widespread utilization of flexible electronics is hindered by several constraints, including elevated Young's modulus, inadequate biocompatibility, and diminished responsiveness. Therefore, it is necessary to develop innovative materials aimed at overcoming these hurdles and catalysing their practical implementation.

Optical Devices for the Diagnosis and Management of Spinal Cord Injuries: A Review.

Throughout the central nervous system, the spinal cord plays a very important role, namely, transmitting sensory and motor information inwardly so that it can be processed by the brain. There are many different ways this structure can be damaged, such as through traumatic injury or surgery, such as scoliosis correction, for instance. Consequently, damage may be caused to the nervous system as a result of this.

Smart materials for flexible electronics and devices: hydrogel.

In recent years, flexible conductive materials have attracted considerable attention for their potential use in flexible energy storage devices, touch panels, sensors, memristors, and other applications. The outstanding flexibility, electricity, and tunable mechanical properties of hydrogels make them ideal conductive materials for flexible electronic devices. Various synthetic strategies have been developed to produce conductive and environmentally friendly hydrogels for high-performance flexible electronics.

RETRACTED: Embedded Sensors with 3D Printing Technology: Review.

Embedded sensors (ESs) are used in smart materials to enable continuous and permanent measurements of their structural integrity, while sensing technology involves developing sensors, sensory systems, or smart materials that monitor a wide range of properties of materials. Incorporating 3D-printed sensors into hosting structures has grown in popularity because of improved assembly processes, reduced system complexity, and lower fabrication costs. 3D-printed sensors can be embedded into structures and attached to surfaces through two methods: attaching to surfaces or embedding in 3D-printed sensors.

Road Map of Semiconductor Metal-Oxide-Based Sensors: A Review.

Identifying disease biomarkers and detecting hazardous, explosive, flammable, and polluting gases and chemicals with extremely sensitive and selective sensor devices remains a challenging and time-consuming research challenge. Due to their exceptional characteristics, semiconducting metal oxides (SMOxs) have received a lot of attention in terms of the development of various types of sensors in recent years. The key performance indicators of SMOx-based sensors are their sensitivity, selectivity, recovery time, and steady response over time.

Long-Term Yogic Intervention Improves Symptomatic Scale and Quality of Life by Reducing Inflammatory Cytokines and Oxidative Stress in Breast Cancer Patients Undergoing Chemotherapy and/or Radiotherapy: A Randomized Control Study.

Introduction: Inflammation has been associated with tumor proliferation and metastasis in breast cancer. Yoga is an ancient therapy that helps in reducing inflammation and improves the patient's quality of life (QoL) and fatigue. In the current study, we investigated the effects of long-term yogic intervention at different time points on the level of inflammatory cytokines and oxidative stress, along with the symptomatic scale and QoL in stage II/III breast cancer patients.

Long-term yogic intervention decreases serum interleukins IL-10 and IL-1β and improves cancer-related fatigue and functional scale during radiotherapy/chemotherapy in breast cancer patients: a randomized control study.

Purpose: Yoga improved fatigue and immunological profile in cancer survivors and has been a promising alternative therapy. Breast cancer treatments are rapidly improving, along with their side effects. This article investigated the effect of the yogic intervention at a different time interval during radiotherapy/chemotherapy on the pro- and anti-inflammatory interleukins along with the cancer-related fatigue and functional scale among patients with stage II/III breast cancer.

Metasurfaces for Sensing Applications: Gas, Bio and Chemical.

Performance of photonic devices critically depends upon their efficiency on controlling the flow of light therein. In the recent past, the implementation of plasmonics, two-dimensional (2D) materials and metamaterials for enhanced light-matter interaction (through concepts such as sub-wavelength light confinement and dynamic wavefront shape manipulation) led to diverse applications belonging to spectroscopy, imaging and optical sensing etc. While 2D materials such as graphene, MoS etc.

An Interplay between Lossy Mode Resonance and Surface Plasmon Resonance and Their Sensing Applications.

Conducting metal oxide (CMO) supports lossy mode resonance (LMR) at the CMO-dielectric interface, whereas surface plasmon resonance (SPR) occurs at the typical plasmonic metal-dielectric interface. The present study investigates these resonances in the bi-layer (ITO + Ag) and tri-layer (ITO + Ag + ITO) geometries in the Kretschmann configuration of excitation. It has been found that depending upon the layer thicknesses one resonance dominates the other.

Rapid and sensitive magnetic field sensor based on photonic crystal fiber with magnetic fluid infiltrated nanoholes.

A fast response time (0.1 s) magnetic field sensor has been demonstrated utilizing a photonic crystal fiber with nano-size air holes infiltrated with polyethylene glycol based magnetic fluid. The effect of magnetic nanoparticles concentration in the fluid on the magneto-optical sensor performance and its dependence under varying magnetic-field loads was investigated in detail.

Polarization-dependent photonic crystal fiber optical filters enabled by asymmetric metasurfaces.

We demonstrate in-fiber polarization-dependent optical filter by nanopatterning an asymmetric metallic metasurface array on the end-facet of polarization-maintaining photonic-crystal fibers. The asymmetric cross-typed nanoslit metasurface arrays are fabricated on the core of the optical fiber using the focused ion beam milling technique. Highly polarization- and wavelength-dependent transmission with transmission efficiency of ∼70% in the telecommunication wavelength was observed by launching two orthogonal linear-polarization states of light into the fiber.

A Sensitive and Fast Fiber Bragg Grating-Based Investigation of the Biomechanical Dynamics of In Vitro Spinal Cord Injuries.

To better understand the real-time biomechanics of soft tissues under sudden mechanical loads such as traumatic spinal cord injury (SCI), it is important to improve in vitro models. During a traumatic SCI, the spinal cord suffers high-velocity compression. The evaluation of spinal canal occlusion with a sensor is required in order to investigate the degree of spinal compression and the fast biomechanical processes involved.

Nano-functionalized long-period fiber grating probe for disease-specific protein detection.

Optical biosensors have great significance for rapid and sensitive detection and monitoring of biomolecular interactions. Here, recent advancement in the nano-functionalized long-period fiber grating (LPFG) is used to develop a cost-effective approach for label-free and real-time detection of the carbonic anhydrase-IX (CA9) monoclonal antibody, a diagnostic biomarker in hypoxia condition cultured carcinoma cells.

MgF prism/rhodium/graphene: efficient refractive index sensing structure in optical domain.

A theoretical study of a noble surface plasmon resonance (SPR) based sensing probe has been carried out. The sensing probe consists of a magnesium fluoride (MgF) prism with its base coated with rarely used noble metal rhodium (Rh) and a bio-compatible layer of graphene. The refractive indices (RIs) of the sensing medium vary from 1.

Assessment of significance of on quality of life in asthma patients: A randomized controlled study.

Background: Asthma is a chronic inflammatory respiratory disease characterized by periodic attacks of wheezing, shortness of breath and a tight feeling in the chest. The current study is based on the effect of on quality of life in asthmatics in Northern India.

Materials And Methods: A total of 300 participants of mild-to-moderate persistent asthma (FEV >60%) aged between 12 and 60 years were recruited from the Department of Pulmonary Medicine.

Fiber-optic ammonia sensor using Ag/SnO(2) thin films: optimization of thickness of SnO(2) film using electric field distribution and reaction factor.

A highly sensitive ammonia gas sensor exploiting the gas sensing characteristics of tin oxide (SnO) has been reported. The methodology of the sensor is based on the phenomenon of surface plasmon resonance (SPR) with a fiber-optic probe consisting of coatings of silver as a plasmonic material and SnO as the sensing layer. The sensing principle relies on the change in refractive index of SnO upon its reaction with ammonia gas.

Impact of yoga on biochemical profile of asthmatics: A randomized controlled study.

Background: Asthma is a chronic inflammatory disorder of the airways. The chronic inflammation causes an associated increase in airway hyperresponsiveness that leads to recurrent episodes of wheezing, breathlessness, chest tightness, and coughing at night or in the early morning. Most of the studies have reported, as the effects of yoga on bronchial asthma, significant improvements in pulmonary functions, quality of life, and decrease in medication use, but none of the studies has attempted to show the effect of yoga on biochemical changes.

Surface plasmon resonance-based fiber optic hydrogen sulphide gas sensor utilizing Cu-ZnO thin films.

We report an experimental study on a surface plasmon resonance (SPR)-based fiber optic hydrogen sulphide gas sensor with a thin metal oxide (zinc oxide (ZnO)) layer as the additional layer. This zinc oxide layer is grown over the copper layer to support surface plasmons at the metal-dielectric interface at room temperature. The wavelength interrogation mode of operation has been used to characterize the sensor.

Surface plasmon resonance based fiber optic pH sensor utilizing Ag/ITO/Al/hydrogel layers.

The fabrication and characterization of a surface plasmon resonance based pH sensor using coatings of silver, ITO (In2O3:SnO2), aluminium and smart hydrogel layers over an unclad core of an optical fiber have been reported. The silver, aluminium and ITO layers were coated using a thermal evaporation technique, while the hydrogel layer was prepared using a dip-coating method. The sensor works on the principle of detecting changes in the refractive index of the hydrogel layer due to its swelling and shrinkage caused by changes in the pH of the fluid surrounding the hydrogel layer.