Dissolution of cellulose in imidazolium-based double salt ionic liquids.

The dissolution of cellulose in double salt ionic liquids (DSILs) was studied in detail and compared with the dissolution in individual constituent ionic liquids (ILs). The DSILs, [Cmim](CHCO)Cl (x is the mole fraction of the single component ILs), were synthesized using acetate and chloride salts of 1-butyl-3-methylimidazolium. These DSILs were then used for the investigation of the solubility of cellulose in the whole mole fraction range.

Preparation of chitosan derivative and its application in papermaking.

To improve the paper strength, a number of resins and polymeric materials are being used, which is not environmental friendly and sustainable. Therefore, bio-based paper additives for the papermaking industry are essential. In this investigation, a water soluble biopolymer like carboxymethyl chitosan (CMCh) was prepared.

Alcohol-based Hand Sanitizers amid COVID-19: Chemical Formulation, Analysis, Safety.

Alcohol-based hand sanitizers (ABHSs) containing ethanol (EtOH) or isopropyl alcohol (IPA) to inactivate microorganisms help prevent the spread of respiratory diseases. These products have become very popular during the COVID-19 pandemic. Apart from vaccines or other preventative antiseptic measures, the majority of consumers have relied on different types of ABHSs to disinfect their hands.

Designing and Formulation Optimization of Hyaluronic Acid Conjugated PLGA Nanoparticles of Tamoxifen for Tumor Targeting.

Background: Tamoxifen is widely used for the treatment of estrogen receptor-positive breast cancer. However, it is associated with severe side effects of cancerous proliferation on the uterus endometrium. The tumor-targeting formulation strategies can effectively overcome drug side effects of tamoxifen and provide safer drug treatment.

Prevalence and Risk Factors of Hypertension among Government Employees Serving in Rangpur City, Bangladesh.

Hypertension (HTN) is an important cause of cardiovascular mortality and the prevalence of hypertension is increasing particularly in middle- and low-income countries including Bangladesh. No data are available for the prevalence of hypertension among the government employees in Bangladesh. In this cross-sectional study, conducted from 30 October to 31 December 2016, 1219 government employees aging ≥18 years working in Rangpur city were evaluated for the presence of HTN and its risk factors.

Potassium hydroxide pulping of rice straw in biorefinery initiatives.

Rice straw is supposed to be one of the most important lignocellulosic raw materials for pulp mill in Asian countries. The major problem in rice straw pulping is silica. The present research is focused on the separation of silica from the black liquor of rice straw pulping by potassium hydroxide (KOH) and pulp evaluation.

Dissolving pulp from jute stick.

Jute stick is woody portion of jute plant, which remain as leftover after extracting bast fibre. Presently, it is being used for fencing in the rural area. In this investigation, biorefinery concept was initiated in producing dissolving pulp from jute stick by pre-hydrolysis kraft process.

Lignin removal enhancement from prehydrolysis liquor of kraft-based dissolving pulp production by laccase-induced polymerization.

Lignin removal is essential for value-added utilization of hemicelluloses and acetic acid present in the prehydrolysis liquor (PHL) of a kraft-based hardwood dissolving pulp production. In this paper, a novel process concept, consisting of laccase-induced lignin polymerization, followed by filtration/flocculation, was developed to enhance the lignin removal. The results showed that the lignin removal increased from 11% to 46-61% at laccase concentration of 1-4 U mL(-1).

Recovering/concentrating of hemicellulosic sugars and acetic acid by nanofiltration and reverse osmosis from prehydrolysis liquor of kraft based hardwood dissolving pulp process.

This work investigated the feasibility of recovering and concentrating sugars and acetic acid (HAc) from prehydrolysis liquor (PHL) of the kraft-based dissolving pulp process prior to fermentation of hemicellulosic sugars, by the combination of activated carbon adsorption, nanofiltration (NF) and reverse osmosis (RO) processes. To reduce the fouling PHL was subjected to adsorption on activated carbon, then the treated PHL (TPHL) passed through a nanofiltration (NF DK) membrane to retain the sugars, and the permeate of acetic acid rich solution was passed through a reverse osmosis membrane (RO SG). It was found that for NF process sugars were concentrated from 48 to 227g/L at a volume reduction factor (VRF) of 5 while 80 to 90% of acetic acid was permeated.

Recovery of acetic acid from pre-hydrolysis liquor of hardwood kraft-based dissolving pulp production process by reactive extraction with triisooctylamine.

Acetic acid was one of the main compositions of the pre-hydrolysis liquor (PHL), which was recovered by reactive extraction with triisooctylamine (TIOA) diluted with decanol. Dilution of TIOA played an important role in extracting acetic acid from the PHL. The recovery of acetic acid from the PHL by TIOA was increased from 10.

Furfural formation from the pre-hydrolysis liquor of a hardwood kraft-based dissolving pulp production process.

This study aimed to produce furfural from the PHL. Results showed best furfural yield of 32.8% and the furfural selectivity of 37.

Separation of lignocellulosic materials by combined processes of pre-hydrolysis and ethanol extraction.

In this paper, we proposed a new modification for an ethanol-based pulping process, which would consist of the pre-hydrolysis (pre-extraction) of wood chips for removing hemicelluloses; the ethanol extraction of pre-hydrolyzed wood chips for removing lignin; and the post purification of cellulose, leading to the production of pure cellulose. We also experimentally evaluated the separation of hemicelluloses from the pre-hydrolysis liquor (PHL) obtained from a pulp mill. To remove lignin from the PHL, it was acidified to a pH of 2, which resulted in 47% lignin precipitation.

Effect of different locations on the morphological, chemical, pulping and papermaking properties of Trema orientalis (Nalita).

The chemical compositions and fiber morphology of stem and branch samples from Trema orientalis at three different sites planted in Bangladesh were determined and their pulping, bleaching and the resulting pulp properties were investigated. A large difference between the stem and branch samples was observed. The stem samples have consistently higher alpha-cellulose and lower lignin content, and longer fibers than the branch samples in all sites.

Characterization of lignin isolated from some nonwood available in Bangladesh.

Lignins isolated from cotton stalks, jute stick and dhaincha by acidolytic dioxane were characterized using alkaline nitrobenzene oxidation, elemental analysis, methoxyl analysis and molecular weight analysis and UV, IR (1)H NMR spectroscopy. The C(9) formulas for cotton stalks, jute stick and dhaincha (Sesbania aculeata) lignin were C(9)H(9.36)O(4.

Characterization and evaluation of golpata fronds as pulping raw materials.

The chemical, morphological and anatomical studies of golpata fronds have been discussed. The lignin, pentosan and alpha-cellulose in golpata fronds were comparable to some common nonwood and hardwood raw materials. The alkali, water and dichloromethane solubility were higher than wood and common nonwood.