Influence of material-material interactions and wear on coarse waste shredders.

This article uses model materials to introduce a controlled, location- and manufacturer-independent internationally accepted method for assessing shredding machines based on large-scale tests. Furthermore, a better understanding of the comminution behaviour of shredders with fixed settings (gap width, shaft speed, cutting tool geometry) is in the focus of the present investigation and assessed, using the statistical analyses for particle size distribution in certain screen sections. Conclusions have been drawn on the comminution behaviour in general and the material-material interactions of different fractions in the grinding chamber of the shredder by showing significant differences in the pure fraction's comminution behaviour against the mixture's comminution behaviour.

Co-processing of solid recovered fuels from mixed municipal and commercial waste in the cement industry - A pathway to a circular economy.

With global municipal solid waste generation increasing steadily, the importance of high-quality, environmentally friendly waste valorization methods is rising, too. Most countries have set themselves ambitious recycling goals and follow a waste hierarchy in which recycling is more preferable than energy recovery. This article focuses on a waste treatment option that already is an integral part of waste management in some countries and enables the simultaneous recovery of energy and mineral constituents: the production of solid recovered fuels (SRFs) from mixed municipal and commercial waste and their use in the cement industry is often referred to as co-processing.

Particle-specific characterisation of non-hazardous, coarse-shredded mixed waste for real-time quality assurance.

The development of a pre-treatment plant for non-hazardous, solid mixed waste into a smart waste factory for future involves the introduction of real-time characterisation of waste streams by applying sensor technology. First, research has been conducted on the application of near-infrared spectroscopy for quality assurance of solid recovered fuels (SRF) produced by the pre-treatment plant. The method is based on statistical analyses, thereby requiring a comprehensive database of detailed waste data.

Wet-mechanical processing of a plastic-rich two-dimensional-fraction from mixed wastes for chemical recycling.

The recycling of source separated polyolefins (POs) (e.g., light weight packaging waste) is already state of the art.

Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling.

To achieve future recycling targets and CO and waste reduction, the transfer of plastic contained in mixed waste from thermal recovery to mechanical recycling is a promising option. This requires extensive knowledge of the necessary processing depth of mixed wastes to enrich plastics and their processability in polymer processing machines. Also, the selection of a suitable processing method and product application area requires appropriate material behaviour.

Investigation of particle-specific characteristics of non-hazardous, fine shredded mixed waste.

The smart waste factory of the future will be monitored and controlled by a combination of various sensors and several real-time data sets. One essential data requirement relates to waste streams at different stages of the treatment process. In order to analyse waste by sensor-based technology, a solid database of representative waste data is necessary.

Methods for identifying the material-recyclable share of SRF during co-processing in the cement industry.

Solid Recovered Fuels (SRF) include non-combustible mineral components (e.g. CaCO, SiO, AlO) that are required as raw materials for producing clinker and are completely incorporated into the clinker during the thermal recovery of SRF.

Design, quality and quality assurance of solid recovered fuels for the substitution of fossil feedstock in the cement industry - Update 2019.

Production, quality and quality assurance, as well as co-incineration of solid recovered fuels in cement industry, have become state-of-the-art in the European cement industry. At the global level, average thermal substitution rate is about 17%, whereby, only 13% in Canada and in the USA 16%, while in the European Union 28 it is about 44% (i.e.

Landfill mining: Developing a comprehensive assessment method.

In Austria, the first basic technological and economic examinations of mass-waste landfills with the purpose to recover secondary raw materials have been carried out by the 'LAMIS - Landfill Mining Österreich' pilot project. A main focus of its research, and the subject of this article, is the first conceptual design of a comprehensive assessment method for landfill mining plans, including not only monetary factors (like costs and proceeds) but also non-monetary ones, such as the concerns of adjoining owners or the environmental impact. Detailed reviews of references, the identification of influences and system boundaries to be included in planning landfill mining, several expert workshops and talks with landfill operators have been performed followed by a division of the whole assessment method into preliminary and main assessment.

Landfill mining: Development of a cost simulation model.

Landfill mining permits recovering secondary raw materials from landfills. Whether this purpose is economically feasible, however, is a matter of various aspects. One is the amount of recoverable secondary raw material (like metals) that can be exploited with a profit.

Solid recovered fuels in the cement industry--semi-automated sample preparation unit as a means for facilitated practical application.

One of the challenges for the cement industry is the quality assurance of alternative fuel (e.g., solid recovered fuel, SRF) in co-incineration plants--especially for inhomogeneous alternative fuels with large particle sizes (d95⩾100 mm), which will gain even more importance in the substitution of conventional fuels due to low production costs.

Landfill mining: Resource potential of Austrian landfills--Evaluation and quality assessment of recovered municipal solid waste by chemical analyses.

Since the need for raw materials in countries undergoing industrialisation (like China) is rising, the availability of metal and fossil fuel energy resources (like ores or coal) has changed in recent years. Landfill sites can contain considerable amounts of recyclables and energy-recoverable materials, therefore, landfill mining is an option for exploiting dumped secondary raw materials, saving primary sources. For the purposes of this article, two sanitary landfill sites have been chosen for obtaining actual data to determine the resource potential of Austrian landfills.

Landfill mining: Development of a theoretical method for a preliminary estimate of the raw material potential of landfill sites.

In recent years, the rising need for raw materials by emerging economies (e.g. China) has led to a change in the availability of certain primary raw materials, such as ores or coal.

Landfill mining in Austria: foundations for an integrated ecological and economic assessment.

For the first time, basic technical and economic studies for landfill mining are being carried out in Austria on the basis of a pilot project. An important goal of these studies is the collection of elementary data as the basis for an integrated ecological and economic assessment of landfill mining projects with regard to their feasibility. For this purpose, economic, ecological, technical, organizational, as well as political and legal influencing factors are identified and extensively studied in the article.

Design and quality assurance for solid recovered fuel.

This contribution describes the processing and the quality assurance of solid recovered fuel (SRF) that is increasingly used in a wide range of co-incineration plants. As an example, the preparation of municipal, commercial and industrial wastes for recovering of two different specifications of waste fuels (i.e.