Hydrophobic Coatings with Charge Permeability via Plasma Deposition of Long-Chain Perfluorocarbons.

Hydrophobization of nanotextured catalyst materials is a promising route to enhance the yield of N and CO conversion into green fuels. However, these applications require a hydrophobic coating to not only promote air trapping but also allow charge transfer at the electrode-electrolyte interface. In this work, nano thin films with thicknesses as low as 7 nm were deposited from the plasma phase of perfluorohexene, perfluorodecene, and perfluorooctane (PFO) precursors using a mild vacuum and gentle powers.

Probing Molecular Mechanisms during the Oscillatory Adsorption of Propyl Chain Functionalized Organosilane Films with Sum Frequency Generation Spectroscopy.

The selectivity rules of sum frequency generation spectroscopy were exploited to determine propyl chain order during the time-dependent oscillatory adsorption of propyltrimethoxysilane (PTMS) and Langmuir-type growth of propyldimethylmethoxysilane (PDMMS). During the early stages of film growth, molecular packing density determines the extent of propyl chain defects within both films with high surface coverage resulting in a film with fewer defects. Following this, an ordered monolayer-like film stabilizes on the AlO substrate for both silanes.

Oxidative Dissolution of Sulfide Minerals in Single and Mixed Sulfide Systems under Simulated Acid and Metalliferous Drainage Conditions.

Chalcopyrite, galena, and sphalerite commonly coexist with pyrite in sulfidic waste rocks. The aim of this work was to investigate their impact, potentially by galvanic interaction, on pyrite oxidation and acid generation rates under simulated acid and metalliferous drainage conditions. Kinetic leach column experiments using single-minerals and pyrite with one or two of the other sulfide minerals were carried out at realistic sulfide contents (total sulfide <5.

The Role of Physisorption and Chemisorption in the Oscillatory Adsorption of Organosilanes on Aluminium Oxide.

The effect of physisorbed and chemisorbed species on the time-dependent self-assembly mechanism of organosilane films has been investigated on aluminium oxide using X-ray Photoelectron Spectroscopy. The role of physisorbed species was determined through their removal using a simple rinsing procedure while monitoring film substrate coverage. Removing physisorbed species from Propyldimethylmethoxysilane films, shown to follow a Langmuir-type adsorption profile, reduces the substrate coverage initially but quickly results in coverages equivalent to films that did not undergo a rinsing procedure.

Scanning Auger Microscopy Studies of Silane Films Grown on Plasma-Modified HOPG Surfaces.

The growth of silane films on plasma oxidized highly oriented pyrolytic graphite (HOPG) surfaces has been studied using wet chemical deposition of propyltrimethoxysilane (PTMS) and propyldimethylmethoxysilane (PDMMS). Scanning Auger microscopy (SAM) and X-ray photoelectron spectroscopy (XPS) were used to investigate the chemical composition and morphology of the silane films. The effects of several deposition parameters were examined, including the necessity of oxidation of the HOPG surface, addition of water with the silane, and rinsing before curing.

The effect of different pyrolysis temperatures on the speciation and availability in soil of P in biochar produced from the solid fraction of manure.

Biochar application to agricultural land has been proposed as a means for improving phosphorus (P) availability in soil. The purpose of the current study was to understand how pyrolysis temperature affects P speciation in biochar and how this affects availability of P in the amended soil. Biochar was produced at different temperatures from digestate solids.

Classification of time-of-flight secondary ion mass spectrometry spectra from complex Cu-Fe sulphides by principal component analysis and artificial neural networks.

Artificial neural network (ANN) and a hybrid principal component analysis-artificial neural network (PCA-ANN) classifiers have been successfully implemented for classification of static time-of-flight secondary ion mass spectrometry (ToF-SIMS) mass spectra collected from complex Cu-Fe sulphides (chalcopyrite, bornite, chalcocite and pyrite) at different flotation conditions. ANNs are very good pattern classifiers because of: their ability to learn and generalise patterns that are not linearly separable; their fault and noise tolerance capability; and high parallelism. In the first approach, fragments from the whole ToF-SIMS spectrum were used as input to the ANN, the model yielded high overall correct classification rates of 100% for feed samples, 88% for conditioned feed samples and 91% for Eh modified samples.

Chemometric and multivariate statistical analysis of time-of-flight secondary ion mass spectrometry spectra from complex Cu-Fe sulfides.

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) spectra of mineral samples are complex, comprised of large mass ranges and many peaks. Consequently, characterization and classification analysis of these systems is challenging. In this study, different chemometric and statistical data evaluation methods, based on monolayer sensitive TOF-SIMS data, have been tested for the characterization and classification of copper-iron sulfide minerals (chalcopyrite, chalcocite, bornite, and pyrite) at different flotation pulp conditions (feed, conditioned feed, and Eh modified).

Synchrotron FTIR microscopy of Langmuir-Blodgett monolayers and polyelectrolyte multilayers at the solid-solid interface.

Synchrotron FTIR microscopy has been used to probe the structure of model boundary lubricant layers confined at the solid-solid interface. The combination of high brightness of the IR source and a novel contact geometry that uses a hemispherical internal reflection element as the means for light delivery has enabled the detection of <2.5 nm thin monolayer lubricant layers in the solid-solid contact, in addition to allowing for spectral acquisition from specific regions of the contact.

Synchrotron scanning photoemission microscopy of homogeneous and heterogeneous metal sulfide minerals.

Scanning photoemission microscopy (SPEM) has been applied to the investigation of homogeneous and heterogeneous metal sulfide mineral surfaces. Three mineral samples were investigated: homogeneous chalcopyrite, heterogeneous chalcopyrite with bornite, and heterogeneous chalcopyrite with pyrite. Sulfur, copper and iron SPEM images, i.

The role of mineral surface chemistry in modified dextrin adsorption.

The adsorption of two modified dextrins (phenyl succinate dextrin--PS Dextrin; styrene oxide dextrin--SO Dextrin) on four different mineral surfaces has been studied using X-ray photoelectron spectroscopy (XPS), in situ atomic force microscopy (AFM) imaging, and captive bubble contact angle measurements. The four surfaces include highly orientated pyrolytic graphite (HOPG), freshly cleaved synthetic sphalerite (ZnS), and two surfaces produced through surface reactions of sphalerite: one oxidized in alkaline solution (pH 9, 1 h immersion); and one subjected to metal ion exchange between copper and zinc (i.e.

Orientation and mutual location of ions at the surface of ionic liquids.

The structure of the liquid-vacuum interface in room temperature ionic liquids (ILs) is investigated using angle-resolved X-ray photoelectron spectroscopy (ARXPS) and synchrotron X-ray photoelectron spectroscopy (SXPS). By varying the polar angle and comparing the results for the chosen ionic liquids, we identify the presence of a surface layer that is chemically different to the bulk. In particular, this layer: (i) is enriched by aliphatic carbon atoms from the saturated carbon chains of the anions and cations, and (ii) contains an unequal distribution of cations and anions in a direction normal to the surface.

Synchrotron PEEM and ToF-SIMS study of oxidized heterogeneous pentlandite, pyrrhotite and chalcopyrite.

Synchrotron-based photoemission electron microscopy (PEEM; probing the surface region) and time-of-flight secondary ion mass spectrometry (ToF-SIMS; probing the uppermost surface layer) have been used to image naturally heterogeneous samples containing chalcopyrite (CuFeS(2)), pentlandite [(Ni,Fe)(9)S(8)] and monoclinic pyrrhotite (Fe(7)S(8)) both freshly polished and exposed to pH 9 KOH for 30 min. PEEM images constructed from the metal L(3) absorption edges were acquired for the freshly prepared and solution-exposed mineral samples. These images were also used to produce near-edge X-ray absorption fine-structure spectra from regions of the images, allowing the chemistry of the surface of each mineral to be interrogated, and the effect of solution exposure on the mineral surface chemistry to be determined.