Preprocedural Planning of Left Atrial Appendage Occlusion: A Review of the Use of Additive Manufacturing.

Stroke is a significant public health problem, with non-valvular atrial fibrillation (NVAF) being one of its main causes. This cardiovascular arrhythmia predisposes to the production of intracardiac thrombi, mostly formed in the left atrial appendage (LAA). When there are contraindications to treatment with oral anticoagulants, another therapeutic option to reduce the possibility of thrombus formation in the LAA is the implantation of an occlusion device by cardiac catheterization.

Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts.

Fused filament fabrication (FFF) is the most popular additive manufacturing method, which allows the production of highly complex three-dimensional parts with minimal material waste. On the other hand, polyethylene terephthalate glycol (PETG) has been used to replace traditional polymers for 3D printing due to its chemical resistance and mechanical performance, among other benefits. However, when fibres are added, these PETG-based composites can be suitable for many different applications.

Hybridization Effects on Bending and Interlaminar Shear Strength of Composite Laminates.

Fiber-reinforced composites are gradually replacing the traditional materials in many engineering applications. However, for many applications these materials are still unsuitable, due to their lack of toughness. In this context, hybridization is a promising strategy in which two or more types of fiber are combined to obtain a better balance of mechanical properties compared to non-hybrid composites.

Effect of Hostile Solutions on the Residual Fatigue Life of Kevlar/Epoxy Composites after Impact Loading.

Due to the enormous benefits inherent to composite materials, they have been widely used in the most diverse fields of engineering. Therefore, it is not surprising that in many of these applications they can be exposed to hostile environments, which can affect the mechanical performance of such materials. Therefore, the main goal of this work was to study the effect of immersion into different hostile solutions on the impact strength and, subsequently, to evaluate the residual fatigue life.

Fused Filament Fabrication-4D-Printed Shape Memory Polymers: A Review.

Additive manufacturing (AM) is the process through which components/structures are produced layer-by-layer. In this context, 4D printing combines 3D printing with time so that this combination results in additively manufactured components that respond to external stimuli and, consequently, change their shape/volume or modify their mechanical properties. Therefore, 4D printing uses shape-memory materials that react to external stimuli such as pH, humidity, and temperature.

Olive Stones as Filler for Polymer-Based Composites: A Review.

Olives' consumption produces copious agricultural byproducts that have accompanied humanity for millennia, but the increasing worldwide production complicates its management. Most wastes are generated during olive oil production in form of olive stones and other lignocellulosic derivatives. Industrial processes of chemical or physical nature to recover economically compounds from biomass residues are costly, difficult, and non-environmentally friendly.

Effect of Post-Cure on the Static and Viscoelastic Properties of a Polyester Resin.

This work intends to study the effect of the curing parameters on the mechanical properties of a polyester resin without a complete curing reaction process. For this purpose, cures at room temperature, 40 °C, and 60 °C, and post-cures at 40 °C and 60 °C, with different exposure times, were considered. Three-point bending tests were performed to assess the bending properties and both stress relaxation and creep behavior.