Carbon, Hydrogen and Chlorine Stable Isotope Fingerprinting for Forensic Investigations of Hexachlorocyclohexanes.

Multielemental stable isotope analysis of persistent organic pollutants (POPs) has the potential to characterize sources, sinks, and degradation processes in the environment. To verify the applicability of this approach for source identification of hexachlorocyclohexane (HCHs), we provide a data set of carbon, hydrogen, and chlorine stable isotope ratios (δC, δH, δCl) of its main stereoisomers (α-, β-, δ- and γ-HCHs) from a sample collection based on worldwide manufacturing. This sample collection comprises production stocks, agricultural and pharmaceutical products, chemical waste dumps, and analytical-grade material, covering the production time period from the late 1960s until now.

Origin of VC-only plumes from naturally enhanced dechlorination in a peat-rich hydrogeologic setting.

The occurrence of vinyl chloride (VC) is often a main concern at sites contaminated with chlorinated solvents due to its high degree of toxicity and carcinogenicity. VC occurrence in aquifers is most often related to the degradation of higher chlorinated ethenes or ethanes and it is generally detected in plumes along with parent contaminants. However, specific combination of stratigraphic, hydrogeologic and geochemical conditions can enhance the degradation of parents and lead to the formation of plumes almost entirely composed of VC (i.

Organic Reference Materials for Hydrogen, Carbon, and Nitrogen Stable Isotope-Ratio Measurements: Caffeines, n-Alkanes, Fatty Acid Methyl Esters, Glycines, L-Valines, Polyethylenes, and Oils.

An international project developed, quality-tested, and determined isotope-δ values of 19 new organic reference materials (RMs) for hydrogen, carbon, and nitrogen stable isotope-ratio measurements, in addition to analyzing pre-existing RMs NBS 22 (oil), IAEA-CH-7 (polyethylene foil), and IAEA-600 (caffeine). These new RMs enable users to normalize measurements of samples to isotope-δ scales. The RMs span a range of δ(2)H(VSMOW-SLAP) values from -210.

Coupling of a headspace autosampler with a programmed temperature vaporizer for stable carbon and hydrogen isotope analysis of volatile organic compounds at microgram per liter concentrations.

One major challenge for the environmental application of compound-specific stable isotope analysis (CSIA) is the necessity of efficient sample treatment methods, allowing isolation of a sufficient mass of organic contaminants needed for accurate measurement of the isotope ratios. Here, we present a novel preconcentration technique--the coupling of a headspace (HS) autosampler with a programmed temperature vaporizer (PTV)--for carbon (δ(13)C) and hydrogen (δ(2)H) isotope analysis of volatile organic compounds in water at concentrations of tens of micrograms per liter. The technique permits large-volume injection of headspace samples, maintaining the principle of simple static HS extraction.

Investigation of humic substance photosensitized reactions via carbon and hydrogen isotope fractionation.

Humic substances (HS) acting as photosensitizers can generate a variety of reactive species, such as OH radicals and excited triplet states ((3)HS*), promoting the degradation of organic compounds. Here, we apply compound-specific stable isotope analysis (CSIA) to characterize photosensitized mechanisms employing fuel oxygenates, such as methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE), as probes. In oxygenated aqueous media, Λ (Δδ(2)H/Δδ(13)C) values of 23 ± 3 and 21 ± 3 for ETBE obtained by photosensitization by Pahokee Peat Humic Acid (PPHA) and Suwannee River Fulvic Acid (SRFA), respectively, were in the range typical for H-abstraction by OH radicals generated by photolysis of H2O2 (Λ = 24 ± 2).

Validation of user- and environmentally friendly extraction and clean-up methods for compound-specific stable carbon isotope analysis of organochlorine pesticides and their metabolites in soils.

In order to evaluate the potential of compound-specific stable carbon isotope analysis (CSIA) for tracking organochlorine pesticides in soil systems, sample pre-treatment methods have to be developed, which can provide recoveries sufficient for low detection limits without altering the isotope ratio of the target compounds. In this study we tested the compatibility of CSIA with user- and environmentally friendly extraction methods, including the Quick, Easy, Cheap, Effective, Rugged and Safe procedure (QuEChERS), Ultrasonic Assisted Extraction (USE) and Focused Ultrasonic Extraction (FUSE), as well as clean-up methods, including sulfuric acid clean-up and Florisil(®) column chromatography for hexachlorocyclohexanes (HCHs), p,p'-dichlorodiphenyltrichloroethane (DDT) and their environmental metabolites (chlorinated benzenes, dichlorodiphenyldichloroethylene - DDE and dichlorodiphenyldichloroethane - DDD) in soils. We optimized the extraction methods for maximum recovery and pre-concentration.

A simplified Quick, Easy, Cheap, Effective, Rugged and Safe approach for the determination of trihalomethanes and benzene, toluene, ethylbenzene and xylenes in soil matrices by fast gas chromatography with mass spectrometry detection.

A method based on simplified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) extraction followed by large-injection volume-fast gas chromatography and mass spectrometry detection has been developed for the determination of trihalomethanes (chloroform, bromodichloromethane, dibromochloromethane and bromoform) and BTEX (benzene, toluene, ethylbenzene and xylenes) in soil samples. The simplified version of QuEChERS used meets the requirements of the "green chemistry" and provides reliable results with high sample throughput, low solvent consumption, little labour and the use of materials commonly employed in laboratories. The GC device used is equipped with a programmable temperature vaporizer (PTV), with a liner packed with Tenax-TA(®).

Determination of trihalomethanes in soil matrices by simplified quick, easy, cheap, effective, rugged and safe extraction and fast gas chromatography with electron capture detection.

A method based on QuEChERS extraction is proposed for the determination of trihalomethanes (chloroform, bromodichloromethane, dibromocloromethane and bromoform) in soil samples. The new version of QuEChERS adapted to soil samples consists of liquid extraction with ethyl acetate, the addition of water to moisten the samples, salting-out partitioning of the water with anhydrous MgSO4, and direct injection of the organic extract, obtained after the centrifugation step, into the gas chromatograph. This simplified extraction procedure maintains the advantages of the original method and avoids some steps, making the final procedure simpler, faster, and cheaper, with the consequent reduction in errors associated with sample manipulation.

Simplified QuEChERS approach for the extraction of chlorinated compounds from soil samples.

A simplified version of the QuEChERS method for the extraction of chlorinated pollutant compounds from soil samples is proposed. The procedure involves simple liquid extraction of the soil sample with ethyl acetate, followed by the addition of anhydrous MgSO(4). Gas chromatography/electron capture detection (ECD) is then used to analyse the extracts without any other sample pretreatment.

Determination of organic compounds from wood combustion aerosol nanoparticles by different gas chromatographic systems and by aerosol mass spectrometry.

Organic compounds in atmospheric nanoparticles have an effect on human health and the climate. The determination of these particles is challenged by the difficulty of sampling, the complexity of sample composition, and the trace-level concentrations of the compounds. Meeting the challenge requires the development of sophisticated sampling systems for size-resolved particles and the optimization of sensitive, accurate and simple analytical techniques and methods.

Programmed temperature vaporizer based method for the sensitive determination of trihalomethanes and benzene, toluene, ethylbenzene and xylenes in soils.

A methodology based on the coupling of a headspace autosampler with a GC and a MS detector operating in SIM mode has been developed for the determination of volatile organic compounds (THMs and BTEX) in soils. The GC device used is equipped with a programmable temperature vaporizer (PTV) packed with Tenax-TA to introduce the samples (the injection mode used was solvent vent), and a modular accelerated column heater (MACH) to control column temperature. The proposed measurement procedure reduces the sample pretreatment step to a minimum.

Determination of trihalomethanes in water samples: a review.

This article reviews the most recent literature addressing the analytical methods applied for trihalomethanes (THMs) determination in water samples. This analysis is usually performed with gas chromatography (GC) combined with a preconcentration step. The detectors most widely used in this type of analyses are mass spectrometers (MS) and electron capture detectors (ECD).

Headspace-programmed temperature vaporizer-fast gas chromatography-mass spectrometry coupling for the determination of trihalomethanes in water.

A new method based on the use of a headspace autosampler in combination with a GC equipped with a programmable temperature vaporizer (PTV) and an MS detector has been developed for the screening and quantitative determination of trihalomethanes (THMs) in different aqueous matrices. The use of headspace generation to introduce the sample has the advantage that no prior sample treatment is required, thus minimizing the creation of analytical artifacts and the errors associated with this step of the analytical process. The PTV inlet used was packed with Tenax-TA.