Effects of proanthocyanidin-functionalized hydroxyapatite nanoparticles on dentin bonding.

Objectives: To evaluate the effect of proanthocyanidin-functionalized hydroxyapatite nanoparticles (nHAp_PA) used as pretreatment at different concentrations on the microtensile bond strength (µTBS) and endogenous enzymatic activity (MMPs) on pH-cycled dentin after 24 h and 6 months of artificial aging.

Materials And Methods: Fifty human sound dentin blocks were randomly assigned to 5 groups (n = 10): (i) negative control (no treatment); (ii) positive control (pH-cycling); (iii) pH-cycling + 2% nHAp_PA for 60s; (iv) pH-cycling + 6.5% nHAp_PA for 60s; (v) pH-cycling + 15% nHAp_PA for 60s.

Green synthesis of chitosan- and fluoride-functionalized silver nanoparticles using Camellia sinensis: Characterization and dental applications.

The development of new biocompatible and eco-friendly materials is essential for the future of dental practice, especially for the management of dental caries. In this study, a novel and simple method was applied for the green synthesis of silver nanoparticles (AgNPs) from the aqueous extract of Camellia sinensis (WT) and functionalized with chitosan (CHS) and NaF. The effects of WT_AgNPs application on demineralized dentin were evaluated for potential dental applications.

Comparison of the Efficacy of Two Protocol Treatments in Patients with Symptomatic Disc Displacement without Reduction: A Randomized Controlled Trial.

The aim of this study was to compare the effectiveness of arthrocentesis followed by hyaluronic acid infiltration treatment (ASH) and mandibular exercise therapy (MET) in patients with symptomatic disc displacement without reduction (DDwoR) by examining pain intensity (VAS), mandibular range of motion (MO), and quality of life (QoL). Fifty-two patients were randomly allocated into two groups, MET (N = 26) and ASH (N = 26), and therapy was applied at the baseline and one month after. Patients were followed up at 1 and 12 months after the baseline assessment.

Evaluation of the remineralizing capacity of silver diamine fluoride on demineralized dentin under pH-cycling conditions.

Objective: (1) to determine the effects of the silver diamine fluoride (SDF) and sodium fluoride (NaF) in demineralized dentin exposed to an acid challenge by pH-cycling, (2) to evaluate the remineralizing capacity of SDF/NaF products based on the physicochemical and mechanical properties of the treated dentin surfaces.

Methodology: In total, 57 human molars were evaluated in different stages of the experimental period: sound dentin - negative control (Stage 1), demineralized dentin - positive control (Stage 2), and dentin treated with SDF/NaF products + pH-c (Stage 3). Several commercial products were used for the SDF treatment: Saforide, RivaStar, and Cariestop.

Gender and Leadership Positions in Spanish Dentistry.

Dentists in Spain reached equal gender representation in 2012 and the number of female dentists has continued to grow (until 57.3% in 2020). This study aims to increase evidence about the gender distribution on the high responsibility positions and opinion leaders of the dental profession and academia.

Physicochemical and Mechanical Effects of Commercial Silver Diamine Fluoride (SDF) Agents on Demineralized Dentin.

Purpose: To investigate the effects of four commercial silver diamine fluoride (SDF) agents on the chemical composition and microstructural properties of dentin, and its relation to the bond strength of two adhesives.

Materials And Methods: Ninety human molars were randomly divided into sound dentin (negative control), demineralized dentin (positive control), and four experimental groups (n = 15) according to the SDF treatments (Cariestop [Biodinamica Quimica y Farmaceutica], RivaStar 1 [SDI], RivaStar 2 [SDI], and Saforide [Tokyo Seiyaku Kasei]). ATR-FTIR, x-ray diffraction, and SEM techniques were employed to characterize the compositional, crystalline, and microstructural properties of the samples.

A gender- based approach to the current situation of Spanish dentists.

Background: To determine the perception of Spanish dentists about the situation of the profession nowadays and how the changes occurred in dental workforce (in number and gender of the past twenty years) have affected their personal and professional lives, under a gender-based approach.

Material And Methods: An online survey comprising of 51 opinion and socio-economic questions, divided into 9 sections of different topics, which was administered between the members of 13 professional associations. Chi-squared tests were calculated (<0.

Proanthocyanidin-functionalized hydroxyapatite nanoparticles as dentin biomodifier.

Objective: This study evaluated the potential combined effects of nanohydroxyapatite and proanthocyanidin on the remineralization and collagen stabilization of demineralized dentin.

Methods: Seventy-five coronal dentin beams (6 × 1 × 1 mm) were randomly allocated into five experimental groups (n = 15): Sound (no treatment), Control (pH-cycling), nHAp (nanohydroxyapatite), nHAp_PA (Proanthocyanidin-functionalized nanohydroxyapatite), and PA (proanthocyanidin) treatments. The sound group (negative control) were immersed in distilled water over the experimental period.

Effect of Two Immediate Dentin Sealing Approaches on Bond Strength of Lava™ CAD/CAM Indirect Restoration.

The objective of this work was to compare the micro-tensile bond strength (µTBS) of CAD/CAM (Computer-Aided Design/ Computer-Aided Manufacturing) specimens cemented with different pairing of adhesives and resin-cements using two Immediate Dentin Dealing (IDS) approaches in comparison with Delay Dentin Sealing (DDS). Coronal dentin from 108 molars were divided into nine groups ( = 12) depending on the adhesive/resin-cement (A-C) assigned. Lava™ Ultimate (4 × 10 × 10 mm) was cemented according to different strategies: IDS1(cementation after dentin sealing), DDS (dentin sealing and cementation at 2-weeks), IDS2 (immediate dentin sealing and cementation at 2-weeks).

Influence of de-remineralization process on chemical, microstructural, and mechanical properties of human and bovine dentin.

Objectives: This study compared the chemical composition, microstructural, and mechanical properties of human and bovine dentin subjected to a demineralization/remineralization process.

Materials And Methods: Human and bovine incisors were sectioned to obtain 120 coronal dentin beams (6 × 1 × 1 mm) that were randomly allocated into 4 subgroups (n = 15) according to the time of treatment (sound, pH-cycling for 3, 7, and 14 days). Three-point bending mechanical test, attenuated total reflectance-Fourier transform infrared (ATR-FTIR), thermogravimetric (TG), and X-ray diffraction (XRD) techniques were employed to characterize the dentin samples.

Changes with age (from 0 to 37 D) in tibiae bone mineralization, chemical composition and structural organization in broiler chickens.

Broiler chickens have an extreme physiology (rapid growth rates) that challenges the correct bone mineralization, being an interesting animal model for studying the development of bone pathologies. This work studies in detail how the mineralization, chemistry, and structural organization of tibiae bone in broiler chickens change with age during the first 5 wk (37 D) from hatching until acquiring the final weight for slaughter. During the early growth phase (first 2 wk), the rapid addition of bone tissue does not allow for bone organic matrix to fully mineralize and mature, and seems to be a critical period for bone development at which bone mineralization cannot keep pace with the rapid growth of bones.

Degree of conversion of a self-adhesive endodontic sealer when used as bulk material.

This study tested the null hypothesis that the opacity of RealSeal SE (RSSE) sealer makes light-curing inefficient, while the degree of conversion (DC) is similar regardless of curing method. Fourteen uniradicular teeth were sectioned at 15 mm from the apex. Root canals were instrumented using the Reciproc file system, bulk-filled with RSSE, and divided randomly into two groups (dual-cure or self-cure).

Synthesis, biocompatibility and mechanical properties of ZrO2-Al2O3 ceramics composites.

This study evaluated cell viability, microhardness and flexural strength of two ceramic composites systems (ZA and AZ), pure alumina and zirconia. There were prepared homogeneous mixtures of 78wt%Al2O3+20wt%3Y-TZP+2wt%Al2O3w (AZ) and 80wt%3YTZP+18wt%Al2O3+2wt%Al2O3w (ZA), as well as 3Y-TZP (Z), pure Al2O3 (A) and commercial monolithic 3Y-TZP (Zc). Also mouse fibroblast cells 3T3-L1 and a MTT test was carried out at 24, 48 and 72 h.

Influence of the bracket on bonding and physical behavior of orthodontic resin cements.

The aim of the study is to determine the influence of the type of bracket, on bond strength, microhardness and conversion degree (CD) of four resin orthodontic cements. Micro-tensile bond strength (µTBS) test between the bracket base and the cement was carried out on glass-hour-shaped specimens (n=20). Vickers Hardness Number (VHN) and micro-Raman spectra were recorded in situ under the bracket base.

Effect of 30 % hydrogen peroxide on mineral chemical composition and surface morphology of bovine enamel.

A combination of atomic absorption spectroscopy (AAS), Fourier transform infrared spectroscopy (FTIR), scanning electronic microscopy (SEM), and gas adsorption techniques was used to characterize the effect of 30 % hydrogen peroxide (HP) on enamel surface. To perform the analyses of AAS, 1 ml of 30 % HP was added to 30 mg of a bovine enamel powder sample (150-200 µm fractions) for times of 5, 20, 60, 90, and 120 min; then 5 ml of the solution was withdrawn after each time period to measure [Ca(2+)] ions. The remaining powder was recovered and analyzed by FTIR.

Influence of adhesive systems on microtensile bond strength of resin-based endodontic sealers to the root dentin.

Objective: The aim of this study was to determine the microtensile bond strength to root dentin of AH Plus™ and EndoREZ® with Clearfil Liner Bond 2V and Optibond Solo™ Plus adhesive systems.

Study Design: The coronal and middle thirds of six single rooted bovine teeth was split longitudinally in a mesio-distal direction. The two halves were joined with AH Plus or EndoREZ, with and without the use of Clearfil Liner Bond 2V and Optibond Solo™ Plus adhesive systems.

Ferric sulphate alterations on primary dentin and the adhesive interface.

Purpose: The purpose of this study was to test the hypothesis that the pulp medication ferric sulphate (FS) may remain on primary dentin, affecting its microchemical structure and the bond strength of adhesives to primary dentin.

Materials And Methods: The effects of FS and pre-bonding conditioning (37% phosphoric acid [PA] for 15 s or a self-etching primer, with or without the use of 2% chlorhexidine [CHX]) on FS-treated primary dentin were characterized using optical microscopy with Masson's and Perls' stains, variable-pressure SEM/energy-dispersive x-ray spectroscopy (VP-SEM/EDS), Fourier transform infrared spectroscopy (FT-IR), and x-ray diffraction. Ferric sulphate was applied for 30 s or 1 h for microchemical analysis.

Bond strength to root dentin and fluid filtration test of AH Plus/gutta-percha, EndoREZ and RealSeal systems.

Objectives: To investigate the bond strength and seal ability produced by AH Plus/gutta-percha, EndoREZ and RealSeal systems to root canal dentin.

Material And Methods: Sixty extracted single-root human teeth, instrumented manually to size 40, were divided into three groups (n=20) according to the sealer used; G1: AH Plus, G2: EndoREZ, and G3: RealSeal sealers. After filling using the lateral condensation technique, each sealer group was randomly divided into two subgroups according to the tests applied (n=10 for µPush-out test and n=10 for fluid filtration test).

Percentage exposure of root dentin collagen after application of two irrigation protocols with manual or rotary instrumentation and two methacrylate resin-based sealers.

Purpose: To compare the percentage of collagen exposed in dentin root thirds after two irrigation protocols with manual or rotary instrumentation using two methacrylate resin-based sealers.

Materials And Methods: Forty-eight single-root human teeth were prepared with manual (n = 24) or nickeltitanium ProFile rotary (n = 24) instrumentation, using 5% NaOCl between instruments and 5 ml 17% EDTA as final irrigant or 20% citric acid + 2% chlorhexidine (CHX) between instruments and as the final irrigant. RealSeal or EndoREZ were used as filling materials.

Effect of thermal aging on the tensile bond strength at reduced areas of seven current adhesives.

The purpose of this study was to determine the micro-tensile bond strength (MTBS) to dentin of seven adhesive systems (total and self-etch adhesives) after 24 h and 5,000 thermocycles. Dentin surfaces of human third molars were exposed and bonded with two total-etch adhesives (Adper Scotchbond 1 XT and XP Bond), two two-step self-etch adhesives (Adper Scotchbond SE and Filtek Silorane Adhesive System) and three one-step self-etch adhesives (G-Bond, Xeno V and Bond Force). All adhesive systems were applied following manufacturers' instructions.

Bond strength of self-adhesive resin cements to different treated indirect composites.

Objectives: The objective of this study was to determine microtensile bond strength (μTBS) to dentin of three self-adhesive and a total-etch resin cements used for luting different treated indirect composites.

Materials And Methods: Composite overlays (Filtek Z250) were prepared. Their intaglio surfaces were ground with 600-grit SiC papers and randomly assigned to three different surface treatments: no treatment, silane application (RelyX Ceramic Primer), and silane agent followed by a bonding agent (Adper Scotchbond 1 XT).

Selective removal of mineral and organic components of bovine enamel by phosphoric acid.

Purpose: To follow the chemical composition of bovine enamel during phosphoric acid-induced demineralization.

Materials And Methods: Enamel samples were ground into a fine powder, selecting the 150- and 200-µm fractions in order to obtain a more homogeneous study material. They were immersed in diluted phosphoric acid (0.

Regional bond strength to lateral walls in class I and II ceramic inlays luted with four resin cements and glass-ionomer luting agent.

Purpose: To investigate regional shear bond strength to lateral walls of ceramic inlays in occlusal and occlusoproximal cavities using etch-and-rinse and self-adhesive resin cements and a glass-ionomer luting agent.

Materials And Methods: IPS e.max Press ceramic inlays were made in 50 Class I and 50 Class II standardized cavities in intact extracted human molars and divided into 5 luting agent subgroups (n = 10): Variolink II (VL); Multilink Sprint (MLS); Multilink Automix (MLA); RelyX Unicem (RLX), and Ketac Cem Aplicap (KC).

Restoration of posterior teeth using occlusal matrix technique.

This article describes a technique for duplicating occlusal surface anatomy using the Biteperf device. Duplication requires an intact occlusal enamel surface and is only indicated when caries lesions are hidden. The occlusal matrix technique allows for preservation of all anatomic details.