Virtual platform to tackle challenges associated with lifelong medical education during the COVID-19 pandemic.

Background: During the COVID-19 pandemic, large in-person conferences were mostly cancelled to avoid further disease contagion. Physicians continued to demand changes in form to enable participation in lifelong medical education programs, and the traditional model of in-person conferences needed to be rethought. As such, a regional branch of the national orthopedic association tried to move in-person conferences onto a virtual platform.

Sports-related fractures in the geriatric population at a level I trauma center.

Background: The population is rapidly aging and remains active over the age of 65 years. An increasing number of sports-related fractures (SRFs) in individuals 65 and older are thus anticipated. Despite the increase in SRFs among the geriatric population, there are limited studies regarding the epidemiological data regarding SRFs in geriatric patients.

Comparison of blood loss between intra-articular microporous polysaccharide hemospheres powder and tranexamic acid following primary total knee arthroplasty.

Total knee arthroplasty (TKA) is associated with substantial blood loss and tranexamic acid (TXA) effectively reduces postoperative bleeding. Although it is known that there is no difference between intravenous or intra-articular (IA) injection, the general interest is directed towards topical hemostatic agents regarding thromboembolic events in high-risk patients. This study aimed to compare the blood conservation effects of IA MPH powder and TXA in patients undergoing primary TKA.

Treatment of intractable septic ankle arthritis with a continuous closed irrigation system.

Objectives: The study aimed to evaluate the efficacy of a continuous closed irrigation system (CCIS) after open debridement for patients with intractable septic ankle arthritis.

Patients And Methods: The retrospective study analyzed the intractable septic arthritis of 12 (6 males, 6 females; mean age: 64.1±14.

Epidermis-Inspired Wearable Piezoresistive Pressure Sensors Using Reduced Graphene Oxide Self-Wrapped Copper Nanowire Networks.

Wearable piezoresistive sensors are being developed as electronic skins (E-skin) for broad applications in human physiological monitoring and soft robotics. Tactile sensors with sufficient sensitivities, durability, and large dynamic ranges are required to replicate this critical component of the somatosensory system. Multiple micro/nanostructures, materials, and sensing modalities have been reported to address this need.

6 nm super-resolution optical transmission and scattering spectroscopic imaging of carbon nanotubes using a nanometer-scale white light source.

Optical transmission and scattering spectroscopic microscopy at the visible and adjacent wavelengths denote one of the most informative and inclusive characterization methods in material research. Unfortunately, restricted by the diffraction limit of light, it cannot resolve the nanoscale variation in light absorption and scattering, diagnostics of the local inhomogeneity in material structure and properties. Moreover, a large quantity of nanomaterials has anisotropic optical properties that are appealing yet hard to characterize through conventional optical methods.

Nanoengineering Approaches Toward Artificial Nose.

Significant scientific efforts have been made to mimic and potentially supersede the mammalian nose using artificial noses based on arrays of individual cross-sensitive gas sensors over the past couple decades. To this end, thousands of research articles have been published regarding the design of gas sensor arrays to function as artificial noses. Nanoengineered materials possessing high surface area for enhanced reaction kinetics and uniquely tunable optical, electronic, and optoelectronic properties have been extensively used as gas sensing materials in single gas sensors and sensor arrays.

Synthesis of gold nanostructures using glycine as the reducing agent.

Biological synthesis of gold nanostructures could potentially offer an environmentally friendly alternative to traditional chemical synthetic methods. During the last decades, various biomolecules, including amino acids, have been successfully used as reducing and capping agents to synthesize multi-shaped gold nanostructures. A grand challenge in this field is to increase our ability to control the size and shape of gold nanostructures formed precisely by systematic synthetic approaches based on the understanding of the mechanism for structural determination.

Utilization of a magnetic field-driven microscopic motion for piezoelectric energy harvesting.

In spite of the recent advances in the development of high performing piezoelectric materials, their applications are typically limited to the direct conversion of mechanical impact energy to electrical energy, potentially risking mechanical failures. In this study, we developed piezoelectric poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) nanofibers integrated with SiO-shelled FeO magnetic nanoparticles, to utilize magnetic energy to reliably drive the piezoelectric effect. Specifically, we show that the shape of the magnetic nanoparticles exerts a significant effect on the efficiency of the magneto-mechano-electrical energy conversion as magnetic nanorods exhibit approximately 70% enhancement in electric field generation under cyclic magnetic fields as compared to nanospheres.

Ultra-sharp and surfactant-free silver nanowire for scanning tunneling microscopy and tip-enhanced Raman spectroscopy.

Chemically-synthesized single-crystalline silver nanowire (AgNW) probes can combine the scanning tunneling microscopy (STM) technique with tip-enhanced Raman scattering spectroscopy (TERS) for complementary morphological and chemical information with nanoscale spatial resolution. However, its performance has been limited by the blunt nanowire tip geometry, the insulating surfactant layer coating AgNW surfaces, and the thermal-induced mechanical vibrations. Here, we report a reproducible fabrication method for the preparation of sharp-tip AgNW-based TERS probes.

Toward High-Contrast Atomic Force Microscopy-Tip-Enhanced Raman Spectroscopy Imaging: Nanoantenna-Mediated Remote-Excitation on Sharp-Tip Silver Nanowire Probes.

The tip-enhanced Raman spectroscopy (TERS) imaging technique is designed to provide correlated morphological and chemical information with a nanoscale spatial resolution by utilizing the plasmonic resonance supported by metallic nanostructures at the tip apex of a scanning probe. However, limited by the scattering cross sections of these nanostructures, only a small fraction of the incident light can be coupled to the plasmonic resonance to generate Raman signals. The uncoupled light then directly excites background spectra with a diffraction-limited resolution, which becomes the background noise that often blurs the TERS image.

Capillary-Force-Assisted Clean-Stamp Transfer of Two-Dimensional Materials.

A simple and clean method of transferring two-dimensional (2D) materials plays a critical role in the fabrication of 2D electronics, particularly the heterostructure devices based on the artificial vertical stacking of various 2D crystals. Currently, clean transfer techniques rely on sacrificial layers or bulky crystal flakes (e.g.

Sharp-Tip Silver Nanowires Mounted on Cantilevers for High-Aspect-Ratio High-Resolution Imaging.

Despite many efforts to fabricate high-aspect-ratio atomic force microscopy (HAR-AFM) probes for high-fidelity, high-resolution topographical imaging of three-dimensional (3D) nanostructured surfaces, current HAR probes still suffer from unsatisfactory performance, low wear-resistivity, and extravagant prices. The primary objective of this work is to demonstrate a novel design of a high-resolution (HR) HAR AFM probe, which is fabricated through a reliable, cost-efficient benchtop process to precisely implant a single ultrasharp metallic nanowire on a standard AFM cantilever probe. The force-displacement curve indicated that the HAR-HR probe is robust against buckling and bending up to 150 nN.

Effect of Substrate Temperature on Ti/TiO2 Layers Growth Using a Combined Sputtering/Sol-Gel Combustion Method.

A combined radio frequency sputtering/sol-gel combustion method was investigated in order to obtain optimum process condition for fabrication of a Titanium (Ti)/Titanium oxide (TiO2) films electrode of transparent conductive oxide-less dye-sensitized solar cells (TCO-less DSCs), Experimentally, the substrate temperature was changed from R.T. to 500 °C, and it was found that there existed an optimum value for efficient performance of the cell.

The importance of gender on coronary artery size: in-vivo assessment by intravascular ultrasound.

Background: It remains controversial whether women have smaller coronary arteries than men because of a gender-specific trait, or whether the observed differences are primarily due to a difference in body size. Intravascular ultrasound (IVUS), with its ability to provide unique coronary images that allow precise measurement of arterial size in vivo, is ideally suited to address this issue.

Hypothesis: Female gender, independent of body size, is associated with smaller coronary artery size as measured by intracoronary ultrasound.