Fusedly Deposited Frequency-Selective Composites Fabricated by a Dual-Nozzle 3D Printing as Microwave Filter.

We report a fusedly deposited frequency-selective composite (FD-FSCs), fabricated with a dual-nozzle 3D printer using a conductive carbon black (CB) polylactic acid (PLA) composite filament and a pure PLA polymer filament. The square frequency-selective pattern was constructed by the conductive CB/PLA nanocomposite, and the apertures of the pattern were filled with the pure dielectric PLA material, which allows the FD-FSC to maintain one single plane, even under bending, and also affects the resonating frequency due to the characteristic impedance of PLA (' ≈ 2.0).

MWCNT-Coated Glass Fabric/Phenol Composite Heating Panel Fabricated by Resin Infusion Process.

MWCNTs (multiwalled carbon nanotubes) were applied to fiber-reinforced composite materials with phenolic resin having flame retardance for the composite heating panels of railroad vehicles. Instead of dispersing MWCNTs in the matrix, the surface of a pristine plain-weave glass fiber fabric was coated with MWCNTs through a series of dip-coating and drying processes, followed by the resin infusion of the phenolic resin to make the composite heating panel. Before and after the resin infusion process, low percolation thresholds of 0.

Independent Heating Performances in the Sub-Zero Environment of MWCNT/PDMS Composite with Low Electron-Tunneling Energy.

The structural stability of various structures (railroads, bridges, buildings, etc.) is lowered due to freezing because of the decreasing outside temperature in winter. To prevent damage from freezing, a technology for de-icing has been developed using an electric-heating composite.

Multiple Impact Damage in GLARE Laminates: Experiments and Simulations.

Experiments and finite element simulations for multiple impact were performed on GLARE 5-2/1 and aluminum 2024-T3. Experiments were conducted on aluminum 2024-T3 and GLARE 5-2/1 at diverse impact energies to produce BVID (barely visible impact damage) and CVID (clearly visible impact damage). The finite element model was developed for multiple impact analysis using ABAQUS software and was confirmed by comparing the finite element analysis outcomes with experimental results.

Mechanistic Pathways for the Molecular Step Growth of Calcium Oxalate Monohydrate Crystal Revealed by In Situ Liquid-Phase Atomic Force Microscopy.

Calcium oxalate monohydrate (COM) crystal is the most common crystalline component of human kidney stones. The molecular-scale inhibitory mechanisms of COM crystal growth by urinary biomolecules such as citrate and osteopontin adsorbed onto the crystal surface are now well understood. However, the pathways by which dissolved calcium and oxalate ions are incorporated into the molecular step of the COM crystal surface, leading to COM crystal growth-a prerequisite to be elucidated for developing effective therapeutics to inhibit COM stones-remain unknown.

Flexible Magnetic Polymer Composite Substrate with BaSrZ Hexaferrite Particles of VHF/Low UHF Patch Antennas for UAVs and Medical Implant Devices.

Our goal is to fabricate flexible magnetic polymer composites as antenna substrates for very high frequency (VHF)/low ultra high frequency (UHF) antennas for unmanned aerial vehicles (UAVs) and medical devices. Magnetodielectric materials, which have permeability () similar to permittivity (), have attracted great attention, because they facilitate miniaturization of microwave devices while keeping or enhancing electromagnetic characteristics. Mechanically millled BaSrCoFeO (BaSrZ) hexaferrite particles were used to increase permeability in the interesting frequency band.

Effect of Dispersion by Three-Roll Milling on Electrical Properties and Filler Length of Carbon Nanotube Composites.

For practical use of carbon nanotube (CNT) composites, especially in electronic applications, uniform dispersion of a high concentration of CNTs in a polymer matrix is a critical challenge. Three-roll milling is one of most reliable dispersion techniques. We investigate the effect of three-roll milling time on CNT length and the electrical properties of a CNT/polydimethylsiloxane composite film with 10 wt% CNTs.

Seamless Tube-Type Heater with Uniform Thickness and Temperature Distribution Based on Carbon Nanotubes Aligned by Circumferential Shearing.

The uniform temperature distribution, one of the requirements for long-term durability, is essential for composite heaters. An analytical model for temperature distribution of a tube-type heater was derived, and it revealed that thickness uniformity is one order more important than intrinsic material properties such as density, heat capacity, and electrical conductivity of the heating tube. We introduced a circumferential shearing process to fabricate a flexible, seamless tube-type heating layer of carbon nanotube/silicone rubber composite with outstanding uniform distribution of thickness and temperature, which may be attributed to a shorter characteristic dimension in the circumferential direction than in the axial direction.

Modeling the electrical resistivity of polymer composites with segregated structures.

Hybrid carbon nanotube composites with two different types of fillers have attracted considerable attention for various advantages. The incorporation of micro-scale secondary fillers creates an excluded volume that leads to the increase in the electrical conductivity. By contrast, nano-scale secondary fillers shows a conflicting behavior of the decreased electrical conductivity with micro-scale secondary fillers.

Mechanically Robust Magnetic Carbon Nanotube Papers Prepared with CoFeO Nanoparticles for Electromagnetic Interference Shielding and Magnetomechanical Actuation.

The introduction of inorganic nanoparticles into carbon nanotube (CNT) papers can provide a versatile route to the fabrication of CNT papers with diverse functionalities, but it may lead to a reduction in their mechanical properties. Here, we describe a simple and effective strategy for the fabrication of mechanically robust magnetic CNT papers for electromagnetic interference (EMI) shielding and magnetomechanical actuation applications. The magnetic CNT papers were produced by vacuum filtration of an aqueous suspension of CNTs, CoFeO nanoparticles, and poly(vinyl alcohol) (PVA).

Highly Effective Electromagnetic Interference Shielding Materials based on Silver Nanowire/Cellulose Papers.

We fabricated silver nanowire (AgNW)-coated cellulose papers with a hierarchical structure by an efficient and facile dip-coating process, and investigated their microstructures, electrical conductivity and electromagnetic interference (EMI) shielding effectiveness. SEM images confirm that AgNWs are coated dominantly on the paper surfaces, although they exist partially in the inner parts of the cellulose papers, which demonstrates that the AgNW density gradually decreases in thickness direction of the AgNW/cellulose papers. This result is supported by the anisotropic apparent electrical conductivity of the AgNW/cellulose papers depending on in-plane or thickness direction.

Bioinspired superhydrophobic surfaces, fabricated through simple and scalable roll-to-roll processing.

A simple, scalable, non-lithographic, technique for fabricating durable superhydrophobic (SH) surfaces, based on the fingering instabilities associated with non-Newtonian flow and shear tearing, has been developed. The high viscosity of the nanotube/elastomer paste has been exploited for the fabrication. The fabricated SH surfaces had the appearance of bristled shark skin and were robust with respect to mechanical forces.

Smart conducting polymer composites having zero temperature coefficient of resistance.

Zero temperature coefficient of resistance (TCR) is essential for the precise control of temperature in heating element and sensor applications. Many studies have focused on developing zero-TCR systems with inorganic compounds; however, very few have dealt with developing zero-TCR systems with polymeric materials. Composite systems with a polymer matrix and a conducting filler show either a negative (NTC) or a positive temperature coefficient (PTC) of resistance, depending on several factors, e.

Sleep disturbances and predictive factors in caregivers of patients with mild cognitive impairment and dementia.

Background And Purpose: We examined the characteristics of sleep disturbances and sleep patterns in the caregivers of patients with amnestic mild cognitive impairment (aMCI) and dementia.

Methods: We prospectively studied 132 patients (60 with aMCI and 72 with dementia) and their caregivers, and 52 noncaregiver controls. All caregivers and controls completed several sleep questionnaires, including the Pittsburgh Sleep Quality Index (PSQI).

Carbon nanotube mat as mediator-less glucose sensor electrode.

In this paper, the direct electron transfer of glucose oxidase (GOx) on carbon nanotube (CNT) mat electrode is demonstrated. Because of the electrical conductivity and mechanical strength of CNT mat, it can be used as an electrode as well as a catalyst support. Therefore, the preparation process for the CNT mat based sensor electrode is simpler than that of the conventional CNT dispersed sensor electrodes.