Fracture resistances of heat-treated nickel-titanium files used for minimally invasive instrumentation.

Background: This study compared the torsional resistance, bending stiffness, and cyclic fatigue resistances of different heat-treated NiTi files for minimally invasive instrumentation.

Methods: TruNatomy (TN) and EndoRoad (ER) file systems were compared with ProTaper Gold (PG). Torsional load, distortion angle, and bending stiffness were assessed using a custom device AEndoS, and toughness was calculated using the torsional data.

Effects of Side Flattening on Torsional and Cyclic Fracture Resistance of Nickel-Titanium File.

Introduction: The purpose of this study was to evaluate the effect of side flattening of cutting flutes on the cyclic resistance and torsional resistance of nickel-titanium files.

Methods: Both novel flattened Platinum V.EU (PL) and standard nonflattened CC Premium V.

The effect of ibuprofen sustained release oral premedication on intraoperative and postoperative pain: A randomised clinical trial.

The aim of this study was to assess the effect of ibuprofen sustained release (SR) oral premedication on the efficacy of buccal infiltration (BI) with intraoperative and postoperative pain after single-visit root canal treatment. Sixty patients diagnosed with symptomatic irreversible pulpitis and apical periodontitis in mandibular molar were divided into two groups. Group SR received ibuprofen SR 800 mg and group PL received placebo capsule 1 h before 3.

Effect of MT Technology of Heat Treatment on Reciproc: Comparison of Reciproc, Reciproc Blue, and Reciproc MT.

Introduction: This study aimed to evaluate the effects from the memory-triple (MT) heat treatment on the fatigue resistance of the Reciproc by comparison with the file systems of same geometry.

Methods: Reciproc files subjected to MT heat treatment technology were designated as Group RMT and were compared with the original Reciproc (Group REC) and Reciproc Blue (Group REB). Each NiTi file from 3 groups (n = 15) was operated reciprocally with a repetitive up-and-down movement in the curved canal with 4 mm of pecking distance inside of the simulated canal at body temperature.

Effect of Heat Treatment on Mechanical Properties of Nickel-Titanium Instruments.

Introduction: The aim of this study was to evaluate the torsional resistance, cyclic fatigue resistance, and bending stiffness of nickel-titanium (NiTi) file systems with different heat treatments and cross-sectional designs.

Methods: WaveOne Primary treated with memory-triple (MT) heat treatment (WOMT) was compared with WaveOne Primary (WO) and WaveOne Gold Primary (WOG). Torsional resistance test was performed using a customized device, and the distortion angle, ultimate strength, and toughness were evaluated.

Chemomechanical Properties and Biocompatibility of Various Premixed Putty-type Bioactive Ceramic Cements.

Introduction: This study aimed to evaluate the chemomechanical properties and biocompatibility of recently introduced premixed putty-type bioactive ceramic cements (PPBCs).

Methods: Including ProRoot MTA (PMTA) as a control, BC RRM fast-set putty (BCPT), Well-Root PT (WRPT), One-Fil PT (OFPT), and Endocem MTA premixed (ECPM) were compared to evaluate setting time, radiopacity, pH change, and microhardness. Biocompatibility on human dental pulp cells was compared using CCK-8 assay.

Differences in setting time of calcium silicate-based sealers under different test conditions.

Background/purpose: Recently introduced calcium silicate-based bioceramic (CSBC) sealers require moisture for setting, thus this study aimed to compare the setting times of epoxy resin-and CSBC sealers under different test conditions.

Materials And Methods: Four CSBC sealers (CeraSeal, EndoSeal TCS, One-Fil, and Well-Root ST) were compared to an epoxy resin-based sealer (AH Plus). Each sealer was placed in a stainless-steel and gypsum molds on a glass slide.

Long-term follow-up of single-visit pulp revascularisation for the dens evaginatus and dens invaginatus: Cases report.

This article documents cases of single-visit pulp revascularisation for dens evaginatus and dens invaginatus, without using intracranial medicaments or antibiotics, aiming to provide a potentially applicable protocol for pulp revascularisation procedure in a single-visit. Two patients with chief complaints of pain and swelling visited a dental hospital. Radiographs revealed that the causative teeth had an open apex and periapical radiolucency, and the teeth were diagnosed as pulp necrosis and acute apical abscess or symptomatic apical periodontitis.

Physicochemical Properties and Biocompatibility of Various Bioceramic Root Canal Sealers: In Vitro Study.

Introduction: The aim of this study was to compare the physicochemical properties and biocompatibility of various calcium silicate-based bioceramic sealers (CSBSs).

Methods: Four recently developed CSBSs, including AH Plus Bioceramic Sealer (AHB), EndoSequence BC Sealer (ESB), TotalFill BC Sealer (TTB), and Bio-C Sealer (BIC), were compared with the epoxy resin-based sealer AH Plus (AHP). Their physical properties, including flow, setting time, radiopacity, dimensional stability, and pH, were evaluated according to the International Organization for Standardization (ISO) 6876.

Effect of Periodic Changes in Rotation Speed on Torsional Stress and Screw-in Force by Alternative Rotation Technique.

Introduction: This study evaluated the effect of periodic changes in rotation speed on torsional stress and screw-in force using the dedicated alternative rotation technique (ART) motion of the EQ-M (Metabiomed, Cheongju, Korea) endodontic motor.

Methods: Two ART modes of the EQ-M motor in 2 alternative techniques (ART30 and ART50) and continuous rotation were compared using ProTaper Next X2 (Dentsply Sirona, Charlotte, NC) files and simulated resin blocks (n = 12 per group). ART30 and ART50 were operated by continuous rotation of 350 rpm for 360° and then rotated at 30% increased speed from the base speed for 180° and at 50% increased speed for 180°, respectively.

Pilot Evaluation of Sealer-Based Root Canal Obturation Using Epoxy-Resin-Based and Calcium-Silicate-Based Sealers: A Randomized Clinical Trial.

The purpose of this randomized controlled clinical trial was to assess the short-term clinical effectiveness of sealer-based root canal obturation using calcium-silicate-based sealer (CSBS) and epoxy-resin-based sealer (ERBS). A total of eighty patients (eighty teeth) were enrolled and seventy-two patients (seventy-two teeth) were randomly assigned into four different sealer groups: AH Plus (AH, Dentsply Sirona), ADseal (AD, Meta Biomed), CeraSeal (CS, Meta Biomed), or EndoSeal TCS (ES, Maruchi). At the first visit, root canal treatment was performed using ProTaper.

Torque Generation of the Endodontic Instruments: A Narrative Review.

As the use of nickel-titanium (NiTi) file systems for root canal therapy has become popular; hence, knowledge and understanding of the characteristics of NiTi files is essential for dentists. Unintended sudden fracture can occur during root canal shaping, and it is important to understand the conditions that may cause instrument fractures. Torque is defined as the force required to rotate the NiTi file and can be considered of as a parameter for the stress generated.

Characterisation of deformed or separated nickel-titanium retreatment instruments after clinical use - A multicentre experience: Defect profiles of clinically-used retreatment instruments.

Objectives: The present study examined the defect characteristics of clinically-used, discarded nickel titanium rotary retreatment instruments and analysed the impact of clinical use on their metallurgical properties.

Methods: 92 XP-endo Shaper (XPS; FKG Dentaire) and 20 XP-endo Finisher (XPFR; FKG Dentaire) instruments with structural deformation or separation were collected after retreatment from four endodontic clinics over a 20-month period. The types of defects and their relative locations were recorded.

Torsional Resistance of Heat-Treated Nickel-Titanium Instruments under Different Temperature Conditions.

This study compared the torsional resistance of heat-treated nickel-titanium (NiTi) instruments under different temperature conditions. Four thermomechanically treated single-use NiTi rotary instruments were selected for this study: OneShape (OS), OneCurve (OC), WaveOne Gold (WOG) and HyFlex EDM (HFE). Each instrument was further subdivided by temperature into 2 subgroups.

Comparison of the effects from coronal pre-flaring and glide-path preparation on torque generation during root canal shaping procedure.

This study aimed to evaluate the effect of glide-path preparation and coronal pre-flaring on torque generation of rotary nickel-titanium files. Sixty mesiobuccal root canals of 3D printed resin teeth (Dentalike) were randomly divided into 4 groups (n = 15) according to the preparation method; Group 1: OneCurve only; Group 2: OneG and OneCurve; Group 3: OneFlare and OneCurve; Group 4: OneFlare, OneG, and OneCurve. During the final canal preparation procedure, the torque generated was recorded.

Effects of Root Canal Curvature and Mechanical Properties of Nickel-Titanium Files on Torque Generation.

Introduction: This study aimed to compare the torque generated by 4 different files in root canals with 4 different curvature angles.

Methods: Four brands of nickel-titanium (NiTi) endodontic files were selected: WaveOne Primary (Dentsply Sirona, Ballaigues, Switzerland), WaveOne Gold Primary (Dentsply Sirona), ProTaper Universal F2 (Dentsply Sirona), and ProTaper Next X2 (Dentsply Sirona). A tempered steel block containing artificial canals with 4 different canal curvatures (15°, 25°, 35°, and 45°) was constructed.

Physicochemical properties and cytocompatibility of newly developed calcium silicate-based sealers.

The purpose of this study was to compare the physical properties and cytocompatibility of contemporary calcium silicate-based sealers. Four calcium silicate-based sealers (BrightEndo MTA sealer, CeraSeal, EndoSeal TCS and One-Fil) were compared to an epoxy resin-based sealer (AH Plus). Flow, setting time, radiopacity and dimensional change were evaluated according to ISO 6876 standards.

Advancement of Mechanical Properties of Nickel-Titanium Rotary Endodontic Instruments by Spring Machining on the File Shaft.

Nickel-titanium (NiTi) endodontic rotary instruments are used extensively in root canal procedures by both general dentists and specialists. However, their vulnerability to fracture is the major reason for clinicians' concern regarding their use. The objective of this study was to investigate the potential effects of spring machining of the file shaft on the fatigue and torsional resistances of NiTi rotary instruments.

Numeric Evaluation of Innovate Spring Machined Nickel-Titanium Rotary Instruments: A 3-dimensional Finite Element Study.

Introduction: The purpose of this study was to investigate if machined springs in nickel-titanium (NiTi) rotary instruments can improve their mechanical properties. The bending and torsion properties were assessed using finite element (FE) model analysis.

Methods: A basic 3-dimensional file model without a spring was created with apical size #25, 25-mm full length, and 16-mm cutting flutes.

Torsional Resistance of WaveOne Gold and Reciproc Blue according to the Loading Methods.

Introduction: This study aimed to compare the torsional resistances and fracture modes of WaveOne Gold (Dentsply Sirona, Ballaigues, Switzerland) and Reciproc Blue (VDW, Munich, Germany) using the repetitive torsional loading (RTL) method and the conventional single-rotation (STL) method.

Methods: A 3-mm file tip was fixed with a brass plate, and a torsional load was applied using a custom device. In the RTL method, the file was driven counterclockwise at 50 rpm until it achieved the preset torque of 0.

Buckling Resistance of Various Nickel-Titanium Glide Path Preparation Instruments in Dynamic or Static Mode.

Introduction: The aim of this study was to compare the buckling resistance of nickel-titanium (NiTi) instruments for glide path preparation depending on the test mode (static vs dynamic).

Methods: The conventional PathFile (PF; Dentsply Sirona, Ballaigues, Switzerland) and heat-treated ProGlider (PG, Dentsply Sirona) and WaveOne Gold Glider (WG, Dentsply Sirona) were evaluated. The instrument tips were placed in a small dimple prepared in an aluminum cube in a customized device.

Ex-Vivo Comparison of Torsional Stress on Nickel-Titanium Instruments Activated by Continuous Rotation or Adaptive Motion.

This study aimed to evaluate the effect of adaptive motion applied to conventional nickel-titanium (NiTi) rotary instruments on torsional stress generation during shaping procedure. One hundred and twenty mesio-buccal canals of molars were randomly assigned to two groups according to the kinetics; adaptive motion (AD) and continuous rotation (CR). Each group was divided into four subgroups (n = 15) according to the NiTi instrument systems: HyFlex EDM, One Curve, Twisted File Adaptive, and ProTaper Next.

Effect of Shaft Length on the Torsional Resistance of Rotary Nickel-titanium Instruments.

Introduction: This study was conducted to evaluate the effect of file length on the torsional resistance of nickel-titanium rotary files.

Methods: Forty-five new files with a #25 tip size and variable taper for ProTaper Next (PTN; Dentsply Sirona, York PA), ProTaper Gold (PTG, Dentsply Sirona), and HyFlex CM (HCM; Coltene-Whaledent, Allstetten, Switzerland) were divided into 3 subgroups (n = 15) according to the file length (21, 25, and 31 mm). Torsional tests were performed using a custom-made device (AEndoS; DMJ System, Busan, Korea).

Comparison of Screw-In Forces during Movement of Endodontic Files with Different Geometries, Alloys, and Kinetics.

This study compared the maximum screw-in forces of various instruments during their movements. Forty simulated canals in resin blocks were randomly divided into four groups (n = 10): ProTaper Universal F2, ProTaper Gold F2, WaveOne Primary, and WaveOne Gold Primary. To standardize a lumen size, all artificial canals were prepared with ProTaper Universal F1.

Comparison of In Vitro Torque Generation during Instrumentation with Adaptive Versus Continuous Movement.

Introduction: The purpose of this in vitro study was to compare the torque generated by continuous and adaptive movements of 2 nickel-titanium rotary file systems.

Methods: Forty-five simulated resin blocks with an S-shaped canal were randomly divided into 3 groups (n = 15) according to the file system and kinematics: the K3XF rotary system (Kerr Endodontics, Orange, CA) with continuous rotary movement, the K3XF with adaptive movement, and the Twisted File (Kerr Endodontics) adaptive file with adaptive movement. After creating a glide path, the canal was instrumented to the same size (.