SnS Nanoparticles Embedded in BiVO Surfaces via Eutectic Decomposition for Enhanced Performance in Photoelectrochemical Water Splitting.

BiVO has garnered substantial interest as a promising photoanode material for photoelectrochemical water-splitting due to its narrow band gap and appropriate band edge positions for water oxidation. Nevertheless, its practical use has been impeded by poor charge transport and sluggish water oxidation kinetics. Here, a hybrid composite photoanode is fabricated by uniformly embedding SnS nanoparticles near the surface of a BiVO thin film, creating a type II heterostructure with strong interactions between the nanoparticles and the film for efficient charge separation.

Real-Time Tunable Gas Sensing Platform Based on SnO Nanoparticles Activated by Blue Micro-Light-Emitting Diodes.

Micro-light-emitting diodes (μLEDs) have gained significant interest as an activation source for gas sensors owing to their advantages, including room temperature operation and low power consumption. However, despite these benefits, challenges still exist such as a limited range of detectable gases and slow response. In this study, we present a blue μLED-integrated light-activated gas sensor array based on SnO nanoparticles (NPs) that exhibit excellent sensitivity, tunable selectivity, and rapid detection with micro-watt level power consumption.

Advanced Mechanical Transfer of Micro-LEDs Enabled by Structurally Modified Wide Sapphire Nanomembranes through Thermal Reflow of Photoresist.

Micro light-emitting diodes (micro-LEDs) are pivotal in next-generation display technologies, driven by the need for high pixel density. This study introduces a novel methodology utilizing wide sapphire nanomembranes (W-SNM) as a dual-purpose template for high-quality epitaxial growth and the mechanical lift-off of individual micro-LEDs. Micro-LEDs grow individually on W-SNM, obviating the chip singulation process.

Maximizing Photoelectrochemical Performance in Metal-Oxide Hybrid Composites via Amorphous Exsolution-A New Exsolution Mechanism for Heterogeneous Catalysis.

Exsolution generates metal nanoparticles anchored within crystalline oxide supports, ensuring efficient exposure, uniform dispersion, and strong nanoparticle-perovskite interactions. Increased doping level in the perovskite is essential for further enhancing performance in renewable energy applications; however, this is constrained by limited surface exsolution, structural instability, and sluggish charge transfer. Here, hybrid composites are fabricated by vacuum-annealing a solution containing SrTiO photoanode and Co cocatalyst precursors for photoelectrochemical water-splitting.

Epitaxial growth of 1D GaN-based heterostructures on various substrates for photonic and energy applications.

GaN is an important III-V semiconductor for a variety of applications owing to its large direct band gap. GaN nanowires (NWs) have demonstrated significant potential as critical building blocks for nanoelectronics and nanophotonic devices, as well as integrated nanosystems. We present a comprehensive analysis of the vapor-liquid-solid (VLS) as a general synthesis technique for NWs on a variety of substrates, the morphological and structural characterization, and applications of GaN NWs in piezoelectric nanogenerators, light-emitting diodes, and solar-driven water splitting.

Technological Breakthroughs in Chip Fabrication, Transfer, and Color Conversion for High-Performance Micro-LED Displays.

The implementation of high-efficiency and high-resolution displays has been the focus of considerable research interest. Recently, micro light-emitting diodes (micro-LEDs), which are inorganic light-emitting diodes of size <100 µm , have emerged as a promising display technology owing to their superior features and advantages over other displays like liquid crystal displays and organic light-emitting diodes. Although many companies have introduced micro-LED displays since 2012, obstacles to mass production still exist.

High Performance, Stable, and Flexible Piezoelectric Nanogenerator Based on GaN:Mg Nanowires Directly Grown on Tungsten Foil.

Rapid development of micro-electromechanical systems increases the need for flexible and durable piezoelectric nanogenerators (f-PNG) with high output power density. In this study, a high-performance, flexible, and highly stable f-PNG is prepared by directly growing the Mg-doped semi-insulating GaN nanowires (NWs) on a 30-µm-thick tungsten foil using vapor-liquid-solid growth mechanism. The direct growth of NWs on metal foil extends the overall lifetime of the f-PNG.

Nanostructured CuO with a thin g-CN layer as a highly efficient photocathode for solar water splitting.

A g-CN/CuO nanostructure featuring improved photoelectrochemical properties was successfully prepared using a facile and cost-effective method involving electrodeposition and thermal oxidation. The improved photoelectrochemical properties were mainly ascribed to the increased surface area and improved charge transportation of the g-CN/CuO photocathode. This photocathode can be used in novel strategies for resolving problems associated with low-efficiency CuO photocathodes.

Antinociceptive effect of intrathecal P7C3 via GABA in a rat model of inflammatory pain.

The recently identified molecule P7C3 has been highlighted in the field of pain research. We examined the effect of intrathecal P7C3 in tissue injury pain evoked by formalin injection and determined the role of the GABA system in the activity of P7C3 at the spinal level. Male Sprague-Dawley rats with intrathecal catheters implanted for experimental drug delivery were studied.

GaN Nanowire Growth Promoted by In-Ga-Au Alloy Catalyst with Emphasis on Agglomeration Temperature and In Composition.

The crystallographic orientation control of GaN nanowires (NWs) has been widely investigated by varying the V-III ratio. Here, we report the tuning of crystallographic orientation of GaN NWs by varying the composition of indium (In) in gallium-gold (Ga-Au) alloy catalyst using metal-organic chemical vapor deposition (MOCVD). The c-plane GaN thin film and sapphire substrate are used as growth templates.

Epitaxial Growth of GaN Core and InGaN/GaN Multiple Quantum Well Core/Shell Nanowires on a Thermally Conductive Beryllium Oxide Substrate.

Beryllium oxide (BeO) belongs to a very unique material family that exhibits the divergent properties of high thermal conductivity and high electrical resistivity. BeO has the same crystal structure as GaN, and the absolute difference in the lattice constants is less than 17%. Here, the growth of GaN nanowires (NWs) on the polycrystalline BeO substrate is reported for the first time.

RGB Arrays for Micro-Light-Emitting Diode Applications Using Nanoporous GaN Embedded with Quantum Dots.

The multiple light scattering of nanoporous (NP) GaN was systematically studied and applied to the color down-conversion for micro-light-emitting diode (LED) display applications. The transport mean free path (TMFP) in NP GaN is 660 nm at 450 nm (light wavelength), and it decreases with a decreasing wavelength. It was observed that the short TMFP of the NP GaN increased the light extinction coefficient at 370 nm by 11 times.

Three-dimensional hierarchical semi-polar GaN/InGaN MQW coaxial nanowires on a patterned Si nanowire template.

We have demonstrated for the first time the hybrid development of next-generation 3-D hierarchical GaN/InGaN multiple-quantum-well nanowires on a patterned Si nanowire-template. The patterned Si nanowire-template is fabricated using metal-assisted chemical-etching, and the conformal growth of the GaN/InGaN multiple-quantum-well (MQW) coaxial nanowires is conducted using metal-organic-chemical-vapor-deposition by the two-step growth approach of vapor-liquid-solid for the GaN core and vapor-solid for the GaN/InGaN MQW shells. The growth directions of the GaN nanowires are confirmed by transmission electron microscopy and selected area electron diffraction patterns.

Transferred monolayer MoS onto GaN for heterostructure photoanode: Toward stable and efficient photoelectrochemical water splitting.

Solar-driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes is considered a promising solution for sustainable, renewable, clean, safe and alternative energy sources such as hydrogen. Here, we report the synthesis and characterization of a novel heterostructure MoS/GaN to be used as a photoanode for PEC-WS. The heterostructure was synthesized by metal-organic chemical vapor deposition of single crystalline GaN onto a c-plane sapphire substrate, followed by the deposition of a visible light responding MoS monolayer (E = 1.

Enhanced stability of piezoelectric nanogenerator based on GaN/VO core-shell nanowires with capacitive contact.

Enhanced stability of a piezoelectric nanogenerator (PNG) was demonstrated using c- and m-axis GaN/VO core-shell nanowires (NWs) by analyzing the capacitive coupling of the PNG's output. The NW array grown on GaN thin film was embedded in polydimethylsiloxane (PDMS) matrix, following which the matrix was transferred to an indium (In)-coated PET substrate for achieving superior flexibility of the PNG. The stability of the PNG was enhanced by holding the NW PDMS composite with a PDMS polymer as a bonding material on the PET substrate.

Ultrafast carrier dynamics of conformally grown semi-polar (112[combining macron]2) GaN/InGaN multiple quantum well co-axial nanowires on m-axial GaN core nanowires.

The growth of semi-polar (112[combining macron]2) GaN/InGaN multiple-quantum-well (MQW) co-axial heterostructure shells around m-axial GaN core nanowires on a Si substrate using MOCVD is reported for the first time. The core GaN nanowire and GaN/InGaN MQW shells are grown in a two-step growth sequence of vapor-liquid-solid and vapor-solid growth modes. The luminescence and carrier dynamics of GaN/InGaN MQW coaxial nanowires are studied by photoluminescence, cathodoluminescence, and low temperature time-resolved photoluminescence (TRPL).

Solar hydrogen generation: feature introduction.

The expected depletion of fossil fuel reserves and its severe environmental impact have brought about the need for sustainable and clean energy resources. Solar hydrogen generation via photoelectrochemical (PEC) water splitting techniques, which combine sunlight, water, and semiconductor materials, are promising alternatives to conventional fossil fuels. Solar-hydrogen fuel produced using PEC methods are renewable, sustainable and environmentally friendly.

Enhanced photoelectrochemical stability of GaN photoelectrodes by AlO surface passivation layer.

Photoelectrochemical (PEC) water splitting is one of the most promising hydrogen production methods because of its high efficiency, renewable resources and harmless by-products. Gallium nitride (GaN) is suitable for PEC water splitting because it has excellent stability in electrolyte and band gap energy which straddles the redox potential of water (V = 1.23 V).

Type-II ZnO/ZnS core-shell nanowires: Earth-abundant photoanode for solar-driven photoelectrochemical water splitting.

A core-shell structure, formed in a nanostructured photoanode, is an effective strategy to achieve high solar-to-hydrogen conversion efficiency. In this study, we present a facile and simple synthesis of a unique vertically aligned ZnO/ZnS core-shell heterostructure nanowires (NWs) on a Si substrate. Well-aligned ZnO NWs were grown on Si (100) substrates on a low-temperature ZnO buffer layer by metal-organic chemical vapor deposition.

Stable and High Piezoelectric Output of GaN Nanowire-Based Lead-Free Piezoelectric Nanogenerator by Suppression of Internal Screening.

A piezoelectric nanogenerator (PNG) that is based on c-axis GaN nanowires is fabricated on flexible substrate. In this regard, c-axis GaN nanowires were grown on GaN substrate using the vapor-liquid-solid (VLS) technique by metal organic chemical vapor deposition. Further, Polydimethylsiloxane (PDMS) was coated on nanowire-arrays then PDMS matrix embedded with GaN nanowire-arrays was transferred on Si-rubber substrate.

Solvent Additive-Assisted Anisotropic Assembly and Enhanced Charge Transport of π-Conjugated Polymer Thin Films.

Charge transport in π-conjugated polymer films involves π-π interactions within or between polymer chains. Here, we demonstrate a facile solution processing strategy that provides enhanced intra- and interchain π-π interactions of the resultant polymer films using a good solvent additive with low volatility. These increased interactions result in enhanced charge transport properties.

One-Pot in Situ Hydrothermal Growth of BiVO/Ag/rGO Hybrid Architectures for Solar Water Splitting and Environmental Remediation.

BiVO is ubiquitously known for its potential use as photoanode for PEC-WS due to its well-suited band structure; nevertheless, it suffers from the major drawback of a slow electron hole separation and transportation. We have demonstrated the one-pot synthesis of BiVO/Ag/rGO hybrid photoanodes on a fluorine-doped tin oxide (FTO)-coated glass substrate using a facile and cost-effective hydrothermal method. The structural, morphological, and optical properties were extensively examined, confirming the formation of hybrid heterostructures.

Transparent, Flexible Piezoelectric Nanogenerator Based on GaN Membrane Using Electrochemical Lift-Off.

A transparent and flexible piezoelectric nanogenerator (TF PNG) is demonstrated based on a GaN membrane fabricated by electrochemical lift-off. Under shear stress on the TF PNG by finger force (∼182 mN), the GaN membrane effectively undergoes normal stress and generates piezoelectric polarization along the c-axis, resulting in the generation of piezoelectric output from the TF PNG. Although the GaN layer is 315 times thinner than the flexible polyethylene terephthalate (PET) substrate, the low Young's modulus of PET allows the GaN membranes to absorb ∼41% of the applied strain energy, which leads to their large lattice deformation under extremely low applied stress.

A novel solution to prosthetic valve dehiscence after aortic valve surgery in Behçet's disease.

Objectives: Prosthetic valve dehiscence after aortic valve surgery in Behçet's disease patients is common. We aimed to validate the usefulness of our new technique 'subannular endomyocardial implantation of valve prosthesis' designed to prevent prosthetic valve dehiscence.

Methods: Subannular endomyocardial implantation of valve prosthesis involves suturing the sewing cuff of the valve prosthesis in the endomyocardium below the aortic annulus, which is based on the idea that annular tissue should be excluded from the suture line in Behçet's disease patients.

Improved Reliability of InGaN-Based Light-Emitting Diodes by HfO2 Passivation Layer.

We utilized a passivation layer to improve the leakage current and reliability characteristics of GaN-based light-emitting diodes. The electrical and optical characteristics of the fabricated LEDs were characterized by current-voltage and optical power measurements. The HfO2 passivation layer showed no optical power degradation and suppressed leakage current.