Orbit topology analyzed from π phase shift of magnetic quantum oscillations in three-dimensional Dirac semimetal.

With the emergence of Dirac fermion physics in the field of condensed matter, magnetic quantum oscillations (MQOs) have been used to discern the topology of orbits in Dirac materials. However, many previous researchers have relied on the single-orbit Lifshitz-Kosevich (LK) formula, which overlooks the significant effect of degenerate orbits on MQOs. Since the single-orbit LK formula is valid for massless Dirac semimetals with small cyclotron masses, it is imperative to generalize the method applicable to a wide range of Dirac semimetals, whether massless or massive.

Detection of Micro-Cracks in Metals Using Modulation of PZT-Induced Lamb Waves.

The ultrasonic modulation technique, developed by inspecting the nonlinearity from the interactions of crack surfaces, has been considered very effective in detecting fatigue cracks in the early stage of the crack development due to its high sensitivity. The wave modulation is the frequency shift of a wave passing through a crack and does not occur in intact specimens. Various parameters affect the modulation of the wave, but quantitative analysis for each variable has not been comprehensively conducted due to the complicated interaction of irregular crack surfaces.

High-Contrast Optical Modulation from Strain-Induced Nanogaps at 3D Heterogeneous Interfaces.

The realization of high-contrast modulation in optically transparent media is of great significance for emerging mechano-responsive smart windows. However, no study has provided fundamental strategies for maximizing light scattering during mechanical deformations. Here, a new type of 3D nanocomposite film consisting of an ultrathin (≈60 nm) AlO nanoshell inserted between the elastomers in a periodic 3D nanonetwork is proposed.

Experimental and Numerical Investigations of High-Speed Projectile Impacts on 7075-T651 Aluminum Plates.

Simulation of the material failure under high strain rate conditions is one of the most difficult problems in the finite element analyses, and many researchers have tried to understand and reproduce dynamic material fracture. In this study, we investigate a failure criterion that minimizes the mesh dependency at high strain rates and incorporates the criterion into the Johnson-Cook constitutive relationship by developing a user-defined material model. Impact tests were performed using a gas-gun system in order to investigate the response of the 7075-T651 aluminum plate in high-speed collision.

DEVELOPMENT OF IDIOPATHIC MACULAR HOLE IN FELLOW EYES: Spectral Domain Optical Coherence Tomography Features.

Purpose: To investigate the long-term incidence and risk factors of macular hole (MH) development in the fellow eyes of patients with unilateral idiopathic MH.

Methods: The retrospective case-control study involved the fellow eyes of 215 consecutive patients with idiopathic MH. The patients were classified into two groups according to the presence or development of MH in the fellow eye.

Multifunctional Polymer Nanocomposites Reinforced by 3D Continuous Ceramic Nanofillers.

Polymer nanocomposites with inclusion of ceramic nanofillers have relatively high yield strength, elastic moduli, and toughness that therefore are widely used as functional coating and films for optoelectronic applications. Although the mechanical properties are enhanced with increasing the fraction of nanofiller inclusion, there generally is an upper limit on the amount of nanofiller inclusion because the aggregation of the fillers in the polymer matrix, which typically occurs, degrades the mechanical and/or optical performances above 5 vol % of inclusions. Here, we demonstrate an unconventional polymer nanocomposite composed of a uniformly distributed three-dimensional (3D) continuous ceramic nanofillers, which allows for extremely high loading (∼19 vol %) in the polymer matrix without any concern of aggregation and loss in transparency.

Study on effect of laser-induced ablation for Lamb waves in a thin plate.

In this paper, the effect of ablation on the shape of elastic waves generated by laser excitation is studied numerically and experimentally. Laser-induced ultrasound has been widely used in the nondestructive testing (NDT) field because it has the advantage that the sensor does not have to be directly attached to the target structure. In the safety assessment process, low energy excitation is used, and thus the structure is not damaged.

Analysis of Peripapillary Retinal Vessel Diameter in Unilateral Normal-Tension Glaucoma.

Purpose: This study sought to analyze peripapillary retinal vessel diameter and evaluate its correlation with retinal nerve fiber layer (RNFL) thickness in patients with unilateral normal-tension glaucoma (NTG).

Methods: This retrospective study included 37 patients with unilateral NTG and 40 healthy controls. The unilateral NTG patients were selected based on RNFL photography and unilateral visual field (VF) defects from the Humphrey central 30-2 threshold test.

Polymer-free Vertical Transfer of Silicon Nanowires and their Application to Energy Storage.

Silicon nanowires (SiNWs) for use as lithium-ion battery (LIB) anode materials have been studied for their one-dimensional (1D) properties and ability to accommodate large volume changes and avoid rapid capacity fading during cycling. Although the vertical transfer of SiNWs from their original substrate onto a conducting electrode is very important, to date, there has been no report of a direct integration method without polymer binders. Here, we propose for the first time a vertical transfer method for SiNWs grown on a Si substrate directly to the current-collecting electrode without using a polymer adhesive for the use as a binder-free LIB anode.

Highly robust silicon nanowire/graphene core-shell electrodes without polymeric binders.

A large theoretical charge storage capacity along with a low discharge working potential renders silicon a promising anode material for high energy density lithium ion batteries. However, up to 400% volume expansion during charge-discharge cycling coupled with a low intrinsic electronic conductivity causes pulverization and fracture, thus inhibiting silicon's widespread use in practical applications. We report herein on a low cost approach to fabricate hybrid silicon nanowire (SiNW)/graphene nanostructures that exhibit enhanced cycle performance with the capability of retaining more than 90% of their initial capacity after 50 cycles.

Superamphiphobic surface by nanotransfer molding and isotropic etching.

We present a novel method of fabricating superhydrophobic and superoleophobic surfaces with nanoscale reentrant curvature by nanotransfer molding and controlled wet etching of the facile undercut. This method produces completely ordered re-entrant nanostructures and prevents capillary-induced bundling effects. The mushroom-like, re-entrant, overhanging structure demonstrates superhydrophobic and superoleophobic characteristics, as tested by water droplet bouncing and contact angle measurements, and has high transparency on a flexible substrate.

Mass-producible superhydrophobic surfaces.

Mass-producible superhydrophobic surfaces with remarkably identical appearance and efficiency through a mold fabrication and hot embossing process are reported.

Age estimation of Korean children based on dental maturity.

The aim of this study was to evaluate the relationship between age and dental maturity and to establish the standard database of dental maturity based on the Demirjian's stages, which can be used for the age estimation of Korean children. For this purpose, dental maturity was measured by the Demirjian's stages on a randomly selected sample of panoramic radiographs taken from 2706 patients between 1 and 20 years of age and analyzed by multiple linear regression analysis based on the method of least squares. The results showed that, except for the third molars, the development of permanent teeth in Korean children was more advanced in females.