3D Pathways Enabling Highly-Efficient Lithium Reservoir for Fast-Charging Batteries.

Enhancing the mobility of lithium-ions (Li) through surface engineering is one of major challenges facing fast-charging lithium-ion batteries (LIBs). In case of demanding charging conditions, the use of a conventional artificial graphite (AG) anode leads to an increase in operating temperature and the formation of lithium dendrites on the anode surface. In this study, a biphasic zeolitic imidazolate framework (ZIF)-AG anode, designed strategically and coated with a mesoporous material, is verified to improve the pathways of Li and electrons under a high charging current density.

Dry-Electrode All-Solid-State Batteries Fortified with a Moisture Absorbent.

For realizing all-solid-state batteries (ASSBs), it is highly desirable to develop a robust solid electrolyte (SE) that has exceptional ionic conductivity and electrochemical stability at room temperature. While argyrodite-type LiPSCl (LPSCl) SE has garnered attention for its relatively high ionic conductivity (∼3.19 × 10 S cm), it tends to emit hydrogen sulfide (HS) in the presence of moisture, which can hinder the performance of ASSBs.

Bi-Morphological Form of SiO on a Separator for Modulating Li-Ion Solvation and Self-Scavenging of Li Dendrites in Li Metal Batteries.

The lithium (Li) metal anode is highly desirable for high-energy density batteries. During prolonged Li plating-stripping, however, dendritic Li formation and growth are probabilistically high, allowing physical contact between the two electrodes, which results in a cell short-circuit. Engineering the separator is a promising and facile way to suppress dendritic growth.

Nanoarchitectonics of the cathode to improve the reversibility of Li-O batteries.

The strategic design of the cathode is a critical feature for high-performance and long-lasting reversibility of an energy storage system. In particular, the round-trip efficiency and cycling performance of nonaqueous lithium-oxygen batteries are governed by minimizing the discharge products, such as LiO and LiO. Recently, a metal-organic framework has been directly pyrolyzed into a carbon frame with controllable pore volume and size.

Porous carbon architectures with different dimensionalities for lithium metal storage.

Lithium metal batteries have recently gained tremendous attention owing to their high energy capacity compared to other rechargeable batteries. Nevertheless, lithium (Li) dendritic growth causes low Coulombic efficiency, thermal runaway, and safety issues, all of which hinder the practical application of Li metal as an anodic material. In this review, the failure mechanisms of Li metal anode are described according to its infinite volume changes, unstable solid electrolyte interphase, and Li dendritic growth.

Strategic Approaches to the Dendritic Growth and Interfacial Reaction of Lithium Metal Anode.

Utilization of lithium (Li) metal anode is highly desirable for achieving high energy density batteries. Even so, the unavoidable features of Li dendritic growth and inactive Li are still the main factors that hinder its practical application. During plating and stripping, the solid electrolyte interphase (SEI) layer can provide passivation, playing an important role in preventing direct contact between the electrolyte and the electrode in Li metal batteries.

Clinical Significance of Receptor-Interacting Protein 3 and Parkin, Essential Molecules for Necroptosis, in Breast Cancer.

Purpose: Receptor-interacting protein 3 (RIP3) is the main initiator of necroptosis. Parkin prevents the formation of the RIP1-RIP3 complex by promoting polyubiquitination of RIP3. However, the mechanism by which necroptosis affects the clinical features of breast cancer and prognosis is not known.

Trends in Risk-Reducing Mastectomy and Risk-Reducing Salpingo-Oophorectomy in Korean Carriers of the Mutation.

Purpose: mutations are associated with risks of breast and ovarian cancer. In Korea, incidences of genetic testing and risk-reducing surgery (RRS) have increased with insurance coverage and the Angelina Jolie effect. The aim of this study was to identify trends in RRS performed in Korean women with the mutation.

Biomolecular Piezoelectric Materials: From Amino Acids to Living Tissues.

Biomolecular piezoelectric materials are considered a strong candidate material for biomedical applications due to their robust piezoelectricity, biocompatibility, and low dielectric property. The electric field has been found to affect tissue development and regeneration, and the piezoelectric properties of biological materials in the human body are known to provide electric fields by pressure. Therefore, great attention has been paid to the understanding of piezoelectricity in biological tissues and its building blocks.

Patchable and Implantable 2D Nanogenerator.

With the development of technology, electronic devices are becoming more miniaturized and multifunctional. With the development of small electronic devices, they are changing from the conventional accessory type, which is portable, to the patchable type, which can be attached to a person's apparel or body, and the eatable/implantable type, which can be directly implanted into the human body. In this regard, it is necessary to address various technical issues, such as high-capacity/high-efficiency small-sized battery technology, component miniaturization, low power technology, flexible technology, and smart sensing technology.

Everlasting Living and Breathing Gyroid 3D Network in Si@SiOx/C Nanoarchitecture for Lithium Ion Battery.

Silicon-based materials are the most promising candidates to surpass the capacity limitation of conventional graphite anode for lithium ion batteries. Unfortunately, Si-based materials suffer from poor cycling performance and dimensional instability induced by the large volume changes during cycling. To resolve such problems, nanostructured silicon-based materials with delicately controlled microstructure and interfaces have been intensively investigated.

Two-Dimensional Materials Inserted at the Metal/Semiconductor Interface: Attractive Candidates for Semiconductor Device Contacts.

Metal-semiconductor junctions are indispensable in semiconductor devices, but they have recently become a major limiting factor precluding device performance improvement. Here, we report the modification of a metal/n-type Si Schottky contact barrier by the introduction of two-dimensional (2D) materials of either graphene or hexagonal boron nitride (h-BN) at the interface. We realized the lowest specific contact resistivities (ρ) of 3.

Point-Defect-Passivated MoS Nanosheet-Based High Performance Piezoelectric Nanogenerator.

In this work, a sulfur (S) vacancy passivated monolayer MoS piezoelectric nanogenerator (PNG) is demonstrated, and its properties before and after S treatment are compared to investigate the effect of passivating S vacancy. The S vacancies are effectively passivated by using the S treatment process on the pristine MoS surface. The S vacancy site has a tendency to covalently bond with S functional groups; therefore, by capturing free electrons, a S atom will form a chemisorbed bond with the S vacancy site of MoS .

Reliable Piezoelectricity in Bilayer WSe for Piezoelectric Nanogenerators.

Recently, piezoelectricity has been observed in 2D atomically thin materials, such as hexagonal-boron nitride, graphene, and transition metal dichalcogenides (TMDs). Specifically, exfoliated monolayer MoS exhibits a high piezoelectricity that is comparable to that of traditional piezoelectric materials. However, monolayer TMD materials are not regarded as suitable for actual piezoelectric devices due to their insufficient mechanical durability for sustained operation while Bernal-stacked bilayer TMD materials lose noncentrosymmetry and consequently piezoelectricity.

Surface energy and wettability of van der Waals structures.

The wetting behaviour of surfaces is believed to be affected by van der Waals (vdW) forces; however, there is no clear demonstration of this. With the isolation of two-dimensional vdW layered materials it is possible to test this hypothesis. In this paper, we report the wetting behaviour of vdW heterostructures which include chemical vapor deposition (CVD) grown graphene, molybdenum disulfide (MoS2) and tungsten disulfide (WS2) on few layers of hexagon boron nitride (h-BN) and SiO2/Si.

Noise and sensitivity characteristics of solid-state nanopores with a boron nitride 2-D membrane on a pyrex substrate.

We have fabricated highly sensitive and low noise solid-state nanopores with multiple layers of boron nitride (BN) membranes transferred onto a pyrex substrate. Both the dielectric and flicker noise of the device, which have been described as one of the bottlenecks to making highly sensitive 2-D membrane nanopore devices, have been reduced as follows. Firstly, a pyrex substrate with a low dielectric constant (εr = 4.

The prevalence and spectrum of BRCA1 and BRCA2 mutations in Korean population: recent update of the Korean Hereditary Breast Cancer (KOHBRA) study.

The Korean Hereditary Breast Cancer (KOHBRA) study was established to evaluate the prevalence and spectrum of BRCA1/2 mutations in Korean breast cancer patients at risk for hereditary breast and ovarian cancer. A total of 2953 subjects (2403 index patients and 550 family members of affected carriers) from 36 centers participated in this study between May 2007 and December 2013. All participants received genetic counseling and BRCA genetic testing.

Formation of hexagonal boron nitride by metal atomic vacancy-assisted B-N molecular diffusion.

Because of the low solubility of N atoms in metals, hexagonal boron nitride (h-BN) growth has explained by surface reaction on metal rather than by penetration/precipitation of B and N atoms in metal. Here, we present an impressive pathway of h-BN formation at the interface between Ni and oxide substrate based on B-N molecular diffusion into Ni through individual atomic vacancies. First-principles calculations confirmed the formation energies of the h-BN layers on and under the metal and the probability of B-N molecular diffusion in metal.

Ridge formation and removal via annealing in exfoliated graphene.

It is well known that graphene is a very promising material due to its excellent physical, chemical, and thermal properties. Previously, ridges in graphene on a substrate were found in epitaxial graphene on a SiC substrate. It was found in this study that ridges can be made on a graphene layer via mechanical exfoliation on a sapphire substrate, and that ridges can be created or removed through heating and cooling.

The Korean Hereditary Breast Cancer (KOHBRA) study: protocols and interim report.

Aims: The primary aims of the Korean Hereditary Breast Cancer (KOHBRA) study are to estimate the prevalence of BRCA1/2 mutations and ovarian cancer among a high-risk group of patients with hereditary breast cancer and their families.

Materials And Methods: The KOHBRA study is a prospective multicentre cohort identifying cases and their families. Between May 2007 and May 2010, the KOHBRA study enrolled up to 2000 subjects.

Complementary and alternative medicine use and assessment of quality of life in Korean breast cancer patients: a descriptive study.

Purpose: The worldwide use of complementary and alternative medicine (CAM) among cancer patients has increased, with breast cancer patients being more likely to use CAM compared with any other cancer patients. However, few surveys have systematically described CAM use among Korean breast cancer patients. This study investigated the use of CAM among patients who were diagnosed with breast cancer, along with the relevant demographic and clinical factors related to CAM use.