Shelf life effects on the bond strength and microhardness of self-adhesive resin cements.

Background: Among the main advantages of self-adhesive resin cements comprise good aesthetics, strong restoration-tooth bond and biocompatibility. However, some disadvantages, such as high viscosity level, color limitation and short shelf life should be mentioned. Thus, the aim of the current study was to assess bond strength between fiberglass post and root dentin in teeth subjected to self-adhesive resin cements with expired shelf life and hardness.

Comparative study of physical-chemical properties of bioactive glass ionomer cement.

This study analyzed the physical-chemical properties of bioactive ionomer materials. Cention N bioactive materials were evaluated chemically activated (CN) and light-cured (CN-LC), Equia Forte Fill (EQUI); conventional resin composite Filtek Z350 XT (Z350); resin glass ionomer cement Riva light Cure (RIVA) and flowable resin composite Filtek Bulk Fill Flow (BULK-F) were evaluated. Sixty specimens (n=10) were prepared for sorption (SR), solubility (SL), flexural strength (FS), shrinkage stress (SS), conversion degree (CD), microhardness (MI), and surface roughness (SR) tests.

Whitening efficacy of activated charcoal-based products: A single-blind randomized controlled clinical trial.

Objective: This randomized controlled clinical trial evaluated the whitening efficacy, tooth sensitivity (TS), and volunteers' satisfaction following the use of activated charcoal powder and toothpaste.

Methods: Fifty-six volunteers were randomly allocated into 4 groups (n = 14) according to a 14-day toothbrushing or whitening treatment with activated charcoal powder (ACPW), activated charcoal toothpaste (ACT), regular fluoridated toothpaste (RT), and 10 % carbamide peroxide (CP). Objective (ΔE) and subjective (ΔSGU) color and whiteness index (ΔWI) changes were calculated.

Dental aesthetic perception of patients submitted to activated charcoal-based bleaching agents: A randomized clinical trial.

Objective: To evaluate the effects of activated charcoal-based products used in two presentation forms (powder or toothpaste), compared to 10 % carbamide peroxide and conventional toothpaste on aesthetic perception and psychosocial impact before and after treatment.

Methods: Fifty-six participants were divided into 4 experimental groups (n = 14). Activated charcoal-based powder (PW); Activated charcoal-based dentifrice (AC); Conventional fluoride toothpaste (CD) and 10 % carbamide peroxide (CP).

Effect of silver nanoparticles associated with fluoride on the progression of root dentin caries in vitro.

Objectives: To assess the anti-proteolytic effect and potential to inhibit dentin root caries progression of a silver nanoparticle and fluoride solution (CNanoF) in comparison to silver diamine fluoride (SDF).

Methods: 48 specimens of root dentin artificial caries lesion were treated with 38% SDF, CNanoF, CNano or F (n = 6 per group). Ph cycling with demineralization and remineralization solutions simulated caries lesion progression.

Evaluating changes in the color and luminosity of dental enamel after orthodontic treatment: A clinical study.

The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC.

In vitro assessment of activated charcoal-based dental products.

Objective: Assess the effects of activated charcoal-based products on whitening and changes on dental enamel surface.

Material And Methods: Fifty-two blocks of bovine dental enamel were randomly distributed in four groups (n = 13): brushing with activated charcoal-based powder (PW); brushing with activated charcoal-based dentifrice (AC); brushing with a conventional dentifrice containing 1450 ppm of fluoride (CD); and whitening with 10% carbamide peroxide (CP). Color, microhardness, and surface alteration were analyzed at baseline and after 14 days of treatment.

Evaluation of Removal Force in Prosthetic Components of Morse Taper Dental Implants.

The longevity of prosthetic rehabilitation is determined by the stability of the implant and abutment interfaces. True morse taper connections on dental restorations have been effective, however activation force still empirical. This work compared the activation strength and internal contact of Morse taper system according to the removal force.

Anticaries Agent Based on Silver Nanoparticles and Fluoride: Characterization and Biological and Remineralizing Effects-An In Vitro Study.

Objective: The aim of the study was to characterize and evaluate the stability, antimicrobial activity, cytotoxicity, and remineralizing effects of silver nanoparticles and fluoride anticaries agent (AgF) on staining dental enamel.

Materials And Methods: An experimental AgF solution was prepared and compared to silver diamine fluoride (SDF). First, the AgF was characterized and the stability was evaluated by transmission electron microscopy (TEM).

Effect of Chemical Challenges on the Properties of Composite Resins.

Objective: To evaluate the chemical degradation effect on microhardness and roughness of composite resins after aging.

Materials And Methods: Specimens ( = 10) were used for Filtek Z350 XT (Z350), Filtek Bulk Fill (BULK), Micerium HRI (HRI), Micerium BIOFUNCION (BIO), and Vittra APS (VITTRA). Microhardness and roughness were performed before and after degradation with the followed solutions: citric acid, phosphoric acid, 75% alcohol, and distilled water.

Evaluation of enamel roughness after the removal of brackets bonded with different materials: In vivo study.

The aims of this in vivo study were to evaluate the effect of bonding with resin-modified glass ionomer cement (RMGIC) and to assess enamel surface roughness before and after the removal of brackets bonded with composite or RMGIC from the maxillary central incisors. Fifteen orthodontic patients were selected for the study. For each patient, the teeth were rinsed and dried, and brackets were bonded with composite (Transbond XT) and RMGIC (Vitremer Core Buildup/Restorative).

Effect of Amelogenin Solution in the Microhardness of Remineralized Enamel and Shear Bond Strength of Orthodontic Brackets.

Objectives: To evaluate the microhardness of tooth enamel remineralized with enamel matrix protein solution as well as the shear bond strength of orthodontic brackets bonded to this surface.

Materials And Methods: In total, 24 human premolars were selected and divided into 3 experimental groups ( = 8): SE-sound enamel, DE-demineralized enamel, and TE-demineralized enamel treated with amelogenin solution. Samples from DE and TE groups were subjected to pH cycling to induce initial artificial caries lesion.

Effect of application time and concentration of silver diamine fluoride on the enamel remineralization.

Background: Silver diamine fluoride has attracted attention because of its clinical success in arresting dental caries. Thus, the aim of this study was to evaluate the effect of different application times and concentrations of silver diamine fluoride (SDF) on deciduous tooth enamel remineralization.

Material And Methods: Blocks of deciduous tooth enamel were categorized into six groups of 11 each: 2 control groups: intact enamel, and demineralized enamel; 38% SDF and 30% SDF which were subdivided according to application times (1 and 3 min).

The impact of different surface treatments on the shear bond strength of orthodontic metal brackets applied to different CAD/CAM composites.

Background: To investigate the shear bond strength (SBS) of orthodontic metal brackets applied to different CAD/CAM composites treated with different surface treatments.

Material And Methods: Specimens of two CAD/CAM composites were obtained of Lava Ultimate (LU; n=60) and Brilliant Crios (BC; n=60) which were randomly separated into six subgroups (n=10) according to the surface treatment: control (CTL); sandblasting (SB); sandblasting and silane (SBSL); hydrofluoric acid (HF); hydrofluoric acid and silane (HFSL); and Monobond Etch&Prime (MEP). The mandibular central incisor metal brackets were bonded with a light-cure adhesive.

Effect of Protein-Based Treatment on Chemical Composition, Hardness and Bond Strength of Remineralized Enamel.

This study evaluated the chemical composition and microhardness of human enamel treated with an Enamel Matrix Derivative (EMD) solution, and the bond strength between composite resin and this enamel. Thirty human enamel samples were randomly divided into three groups: Untouched Enamel (UE), Demineralized Enamel (DE) and Demineralized Enamel Treated with EMD (ET). DE and ET groups were subjected to acid challenge and ET treated with EMD (EMD was directly applied over conditioned enamel and left for 15 min).

Can silver diamine fluoride or silver nanoparticle-based anticaries agents to affect enamel bond strength?

Objectives: The aim of the current study is to investigate the effect of different anticaries agents, such as experimental agents based on silver nanoparticles (SNPs) and silver diamine fluoride (SDF), on the micro-shear bond strength (μ-SBS) of composite resin applied to intact enamel (IE) or demineralized enamel (DE).

Materials And Methods: Sixty dental enamel fragments were collected from human third molars and categorized into 6 groups ( = 10): positive control (IE), negative control (DE), IE + SDF, DE + SDF, IE + SNP and DE + SNP. Samples from DE, DE + SDF and DE + SNP groups were subjected to pH cycling; superficial microhardness test was performed to confirm demineralization.

Perceived pain during rapid maxillary expansion in children with different expanders.

Objectives: To evaluate and compare the intensity of pain caused by rapid maxillary expansion (RME) with two expanders: Hyrax and Haas type, in growing patients.

Materials And Methods: Thirty-nine patients (23 girls and 16 boys) with an average age of 9.3 years (SD = 1.

Evaluation of Dental Practices Changes During the COVID-19 Pandemic in Brazil.

Dentists are healthcare professionals who are at high risk of infection and transmission of the coronavirus disease-19 (COVID-19). The primary objective of the present study was to evaluate the changes in clinical practice made by Brazilian dentists during the COVID-19 pandemic. From June 22 to July 13, 2020, an online questionnaire was sent to dentists using Google Forms.

Photoelastic stress analysis of different types of anterior teeth splints.

Background/aims: Traumatic dental injuries are highly prevalent and are considered an important health problem. The aim of this study was to evaluate the in vitro stress distribution around simulated traumatized teeth subjected to different types of splints by photoelastic analysis.

Materials And Methods: For each group, five models of maxillary and mandibular arches were made in photoelastic resin using prefabricated teeth models, which were fixed and adjusted in a semi-adjustable articulator.

In-office bleaching with low/medium vs. high concentrate hydrogen peroxide: A systematic review and meta-analysis.

Objective: To answer the following research question: "Dolow/medium hydrogen peroxide (HP) concentrations used for in-office bleaching in patients with permanent dentition have similar color change and bleaching sensitivity (BS) to high HP concentrations?"

Data: Randomized controlled trials that compared low/medium vs. high concentrate HP were included. The risk of bias (RoB) was evaluated using the Cochrane Collaboration tool.

Does Pigment Incorporation into Regular Composite Resins for Posterior Buildups Alter Their Bond Strength?

Posterior build-ups are auxiliary devices to orthodontic treatment which are made with resin-based or glass ionomer composites. Their removal requires care to protect the tooth surface, therefore, pigmented materials are preferred for a better visualization. This study proposed a pigmentation experimental technique of a regular composite resin, evaluating the microshear bond strength test (µ-SBT) of this experimental pigmented resin and comparing with a blue-colored polyacid-modified composite resin, used for posterior buildups.

Do fluorescent agents alter the mechanical strength of orthodontic adhesives? An in vitro and clinical study.

Background: Fluorescent agents are added to orthodontic adhesives with the aim of making them visible under ultraviolet (UV) light, which ensures the complete, safe removal of remnants after orthodontic treatment. However, it is necessary to evaluate if the mechanical strength of these materials is maintained. Therefore, this study evaluated whether the addition of fluorescent agents influences the shear bond strength and clinical performance of a UV light-sensitive adhesive system.

Decomposition Rate, pH, and Enamel Color Alteration of At-Home and In-Office Bleaching Agents.

This study evaluated the decomposition rate (DR), pH, enamel color alteration (DE) and whiteness index (DWI) promoted by at-home and in-office bleaching. Enamel surface was submitted to (n=10): at-home (10%, 15%, 20% carbamide peroxide - CP, 6% hydrogen peroxide -HP) and three 35% HP agents with light irradiation (LED, laser, and halogen) or no treatment (control). The DR and pH of agents were measured after 0, 2, 4, 6 and 8 h (at-home) or after 5, 15, 20, 30 and 40 min (in-office).

Evaluation of the effects of whitening mouth rinses combined with conventional tooth bleaching treatments.

Objectives: The aim of the present study was to evaluate the effect of whitening mouth rinses alone and in combination with conventional whitening treatments on color, microhardness, and surface roughness changes in enamel specimens.

Materials And Methods: A total of 108 enamel specimens were collected from human third molars and divided into 9 groups ( = 12): 38% hydrogen peroxide (HP), 10% carbamide peroxide (CP), 38% HP + Listerine Whitening (LW), 10% CP + LW, 38% HP + Colgate Plax Whitening (CPW), 10% CP + CPW, LW, CPW, and the control group (CG). The initial color of the specimens was measured, followed by microhardness and roughness tests.

Evaluation of bond strength durability on bleached human dentin.

This study evaluated the effect of aging on the microtensile bond strength (μTBS) between composite resin and human dentin bleached with 35% hydrogen peroxide (HP) or 10% carbamide peroxide (CP). Thirty intact extracted third molars were selected for the study. After the dentin surface was exposed, the smear layer was abraded with silicon carbide paper to ensure standardization.