Internal surface modification of additively manufactured macroporous TiAl6V4 biomimetic implants via a calciothermic reaction-based process and osteogenic in vivo responses.

Three-dimensional macroporous titanium-aluminum-vanadium (TiAl6V4) implants produced by additive manufacturing (AM) can be grit blasted (GB) to yield microtextured exterior surfaces, with additional micro/nano-scale surface features provided by subsequent acid etching (AE). However, the line-of-sight nature of GB causes the topography of exterior GB + AE-modified surfaces to differ from internal GB-inaccessible surfaces. Previous in vitro studies using dense TiAl6V4 substrates indicated that a nonline-of-sight, calciothermic-reaction (CaR)-based process provided homogeneous osteogenic nanotextures on GB + AE surfaces, suggesting it could be used to achieve a homogeneous nanotopography on external and internal surfaces of macroporous AM constructs.

Tailoring of TiAl6V4 Surface Nanostructure for Enhanced In Vitro Osteoblast Response via Gas/Solid (Non-Line-of-Sight) Oxidation/Reduction Reactions.

An aging global population is accelerating the need for better, longer-lasting orthopaedic and dental implants. Additive manufacturing can provide patient-specific, titanium-alloy-based implants with tailored, three-dimensional, bone-like architecture. Studies using two-dimensional substrates have demonstrated that osteoblastic differentiation of bone marrow stromal cells (MSCs) is enhanced on surfaces possessing hierarchical macro/micro/nano-scale roughness that mimics the topography of osteoclast resorption pits on the bone surface.

Ceramic-metal composites for heat exchangers in concentrated solar power plants.

The efficiency of generating electricity from heat using concentrated solar power plants (which use mirrors or lenses to concentrate sunlight in order to drive heat engines, usually involving turbines) may be appreciably increased by operating with higher turbine inlet temperatures, but this would require improved heat exchanger materials. By operating turbines with inlet temperatures above 1,023 kelvin using closed-cycle high-pressure supercritical carbon dioxide (sCO) recompression cycles, instead of using conventional (such as subcritical steam Rankine) cycles with inlet temperatures below 823 kelvin, the relative heat-to-electricity conversion efficiency may be increased by more than 20 per cent. The resulting reduction in the cost of dispatchable electricity from concentrated solar power plants (coupled with thermal energy storage) would be an important step towards direct competition with fossil-fuel-based plants and a large reduction in greenhouse gas emissions.

Individually Dispersed Gold Nanoshell-Bearing Cellulose Nanocrystals with Tailorable Plasmon Resonance.

Cellulose nanocrystals (CNCs) can be attractive templates for the generation of functional inorganic/organic nanoparticles, given their fine sizes, aspect ratios, and sustainable worldwide availability in abundant quantities. Here, we present for the first time a scalable, surfactant-free, tailorable wet chemical process for converting commercially available CNCs into individual aspected gold nanoshell-bearing particles with tunable surface plasmon resonance bands. Using a rational cellulose functionalization approach, stable suspensions of positively charged CNCs have been generated.

Application of radiopaque micro-particle fillers for 3-D imaging of periodontal pocket analogues using cone beam CT.

Background: Periodontitis is an infectious/inflammatory disease most often diagnosed by deepening of the gingival sulcus, which leads to periodontal pockets (PPs) conventional manual periodontal probing does not provide detailed information on the three-dimensional (3-D) nature of PPs.

Objectives: To determine whether accurate 3-D analyses of the depths and volumes of calibrated PP analogues (PPAs) can be obtained by conventional cone beam computed tomography (CBCT) coupled with novel radiopaque micro-particle fillers (described in the companion paper) injected into the PPAs.

Methods: Two PPA models were employed: (1) a human skull model with artificial gingiva applied to teeth with alveolar bone loss and calibrated PPAs, and (2) a pig jaw model with alveolar bone loss and surgically-induced PPAs The PPAs were filled with controlled amounts of radiopaque micro-particle filler using volumetric pipetting Inter-method and intra-method agreement tests were then used to compare the PPA depths and volumes obtained from CBCT images with values obtained by masked examiners using calibrated manual methods.

Development of radiopaque, biocompatible, antimicrobial, micro-particle fillers for micro-CT imaging of simulated periodontal pockets.

Objectives: Approximately 10 bacteria can be harbored within periodontal pockets (PP) along with inflammatory byproducts implicated in the pathophysiology of systemic diseases linked to periodontitis (PD). Calculation of this inflammatory burden has involved estimation of total pocket surface area using analog data from conventional periodontal probing which is unable to determine the three-dimensional (3-D) nature of PP. The goals of this study are to determine the radiopacity, biocompatibility, and antimicrobial activity of transient micro-particle fillers in vitro and demonstrate their capability for 3-D imaging of artificial PP (U.

Tunable multimodal adhesion of 3D, nanocrystalline CoFeO pollen replicas.

3D replicas of sunflower pollen microparticles, comprised of a multicomponent magnetic spinel ferrite (CoFeO) with tailorable adhesive properties, have been synthesized for the first time via a conformal layer-by-layer (LbL) surface sol-gel (SSG) deposition process followed by organic pyrolysis and oxide compound formation at a peak temperature of 600 °C-900 °C. These high-fidelity ferrite pollen replicas exhibited multimodal (van der Waals, vdW, and magnetic) adhesion that could be tuned via control of the CoFeO nanoparticle and crystal sizes. The CoFeO pollen replicas exhibited a non-monotonic change in short-range (~10 nm) vdW adhesion with an increase in the peak firing temperature, which was consistent with the counteracting effects of particle coarsening on the size and number of nanoparticles present on the sharp tips of the echini (spines) on the pollen replica surfaces.

Surface modification of bulk titanium substrates for biomedical applications via low-temperature microwave hydrothermal oxidation.

Micro-to-nanoscale surface topographies of orthopaedic and dental implants can affect fluid wetting and biological response. Nanoscale features can be superimposed on microscale roughness of titanium (Ti) surfaces at high temperatures, resulting in increased osteoblast differentiation. However, high temperatures can compromise mechanical properties of the bulk material.

Pumping liquid metal at high temperatures up to 1,673 kelvin.

Heat is fundamental to power generation and many industrial processes, and is most useful at high temperatures because it can be converted more efficiently to other types of energy. However, efficient transportation, storage and conversion of heat at extreme temperatures (more than about 1,300 kelvin) is impractical for many applications. Liquid metals can be very effective media for transferring heat at high temperatures, but liquid-metal pumping has been limited by the corrosion of metal infrastructures.

Compartmentalisation of enzymes for cascade reactions through biomimetic layer-by-layer mineralization.

Cellular metabolic pathways are paradigms for the rapid and waste-free conversion of molecules into useful products through multiple enzyme-catalyzed steps (cascade reactions). Attempts to establish efficient cascade reactions for technological applications have focused on mimicking nature's high degree of organization by controlling the positioning of enzymes through immobilization in tailor-made compartments. The present work utilized peptide-mediated layer-by-layer mineralization as a facile and generic method for the compartmentalisation of multi-enzyme systems in nanoscale silica layers.

Superposition of nanostructures on microrough titanium-aluminum-vanadium alloy surfaces results in an altered integrin expression profile in osteoblasts.

Recent studies of new surface modifications that superimpose well-defined nanostructures on microrough implants, thereby mimicking the hierarchical complexity of native bone, report synergistically enhanced osteoblast maturation and local factor production at the protein level compared to growth on surfaces that are smooth, nanorough, or microrough. Whether the complex micro/nanorough surfaces enhance the osteogenic response by triggering similar patterns of integrin receptors and their associated signaling pathways as with well-established microrough surfaces, is not well understood. Human osteoblasts (hOBs) were cultured until confluent for gene expression studies on tissue culture polystyrene (TCPS) or on titanium alloy (Ti6Al4V) disks with different surface topographies: smooth, nanorough, microrough, and micro/nanorough surfaces.

Structure-based optical filtering by the silica microshell of the centric marine diatom Coscinodiscus wailesii.

Diatoms are a renewable (biologically reproducible) source of three-dimensional (3-D) nanostructured silica that could be attractive for a variety of photonic devices, owing to the wide range of quasi-periodic patterns of nano-to-microscale pores available on the silica microshells (frustules) of various diatom species. We have investigated the optical behavior of the silica frustule of a centric marine diatom, Coscinodiscus wailesii, using a coherent broadband (400-1700 nm) supercontinuum laser focused to a fine (20 µm diameter) spot. The C.

Composition optimization of scintillating rare-earth nanocrystals in oxide glass-ceramics for radiation spectroscopy.

Glass-ceramic nanocomposites comprising GdBr₃/CeBr₃ loaded sodium-aluminosilicate glasses in which scintillating crystallites are precipitated in situ from a host glass matrix were studied. This materials system shows promise as an alternative to single-crystal scintillators, with potential to be fabricated into a wide variety of sizes, shapes, and compositions. Batch compositions containing 15-18 mol.

Role of α2β1 integrins in mediating cell shape on microtextured titanium surfaces.

Surface microroughness plays an important role in determining osteoblast behavior on titanium. Previous studies have shown that osteoblast differentiation on microtextured titanium substrates is dependent on alpha-2 beta-1 (α2β1) integrin signaling. This study used focused ion beam milling and scanning electron microscopy, combined with three-dimensional image reconstruction, to investigate early interactions of individual cells with their substrate and the role of integrin α2β1 in determining cell shape.

High thermal conductivity of chain-oriented amorphous polythiophene.

Polymers are usually considered thermal insulators, because the amorphous arrangement of the molecular chains reduces the mean free path of heat-conducting phonons. The most common method to increase thermal conductivity is to draw polymeric fibres, which increases chain alignment and crystallinity, but creates a material that currently has limited thermal applications. Here we show that pure polythiophene nanofibres can have a thermal conductivity up to ∼ 4.

A magnesiothermic reaction process for the scalable production of mesoporous silicon for rechargeable lithium batteries.

Mesoporous, 3-D, nanocrystalline Si has been synthesized via the magnesiothermic reduction of SiO particles at a peak temperature of only 500 °C in a scalable flow-through reactor setup. Such 3-D porous Si as an anode material exhibited high, reversible capacities (i.e.

High-energy-density sol-gel thin film based on neat 2-cyanoethyltrimethoxysilane.

Hybrid organic-inorganic sol-gel dielectric thin films from a neat 2-cyanoethyltrimethoxysilane (CNETMS) precursor have been fabricated and their permittivity, dielectric strength, and energy density characterized. CNETMS sol-gel films possess compact, polar cyanoethyl groups and exhibit a relative permittivity of 20 at 1 kHz and breakdown strengths ranging from 650 V/μm to 250 V/μm for film thicknesses of 1.3 to 3.

The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells.

Surface micro- and nanostructural modifications of dental and orthopedic implants have shown promising in vitro, in vivo and clinical results. Surface wettability has also been suggested to play an important role in osteoblast differentiation and osseointegration. However, the available techniques to measure surface wettability are not reliable on clinically relevant, rough surfaces.

Differential responses of osteoblast lineage cells to nanotopographically-modified, microroughened titanium-aluminum-vanadium alloy surfaces.

Surface structural modifications at the micrometer and nanometer scales have driven improved success rates of dental and orthopaedic implants by mimicking the hierarchical structure of bone. However, how initial osteoblast-lineage cells populating an implant surface respond to different hierarchical surface topographical cues remains to be elucidated, with bone marrow mesenchymal stem cells (MSCs) or immature osteoblasts as possible initial colonizers. Here we show that in the absence of any exogenous soluble factors, osteoblastic maturation of primary human osteoblasts (HOBs) but not osteoblastic differentiation of MSCs is strongly influenced by nanostructures superimposed onto a microrough Ti6Al4V (TiAlV) alloy.

Direct fabrication of arbitrary-shaped ferroelectric nanostructures on plastic, glass, and silicon substrates.

A complementary metal-oxide-semico-nductor (CMOS)-compatible method for the direct fabrication of arbitrary-shaped Pb(Zr0.52 Ti0.48)O3 and PbTiO3 ferroelectric/piezoelectric nanostructures on plastic, silicon, and soda-lime glass substrates is reported.

The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation.

Titanium (Ti) osseointegration is critical for the success of dental and orthopedic implants. Previous studies have shown that surface roughness at the micro- and submicro-scales promotes osseointegration by enhancing osteoblast differentiation and local factor production. Only relatively recently have the effects of nanoscale roughness on cell response been considered.

Inverted polymer solar cells with amorphous indium zinc oxide as the electron-collecting electrode.

We report on the fabrication and performance of polymer-based inverted solar cells utilizing amorphous indium zinc oxide (a-IZO) as the electron-collecting electrode. Amorphous IZO films of 200 nm thickness were deposited by room temperature sputtering in a high-purity argon atmosphere. The films possessed a high optical transmittance in the visible region (≥ 80%), a low resistivity (3.

Assembly of large-area, highly ordered, crack-free inverse opal films.

Whereas considerable interest exists in self-assembly of well-ordered, porous "inverse opal" structures for optical, electronic, and (bio)chemical applications, uncontrolled defect formation has limited the scale-up and practicality of such approaches. Here we demonstrate a new method for assembling highly ordered, crack-free inverse opal films over a centimeter scale. Multilayered composite colloidal crystal films have been generated via evaporative deposition of polymeric colloidal spheres suspended within a hydrolyzed silicate sol-gel precursor solution.

A gas-tight Cu K alpha x-ray transparent reaction chamber for high-temperature x-ray diffraction analyses of halide gas/solid reactions.

An externally heated, x-ray transparent reaction chamber has been developed to enable the dynamic high temperature x-ray diffraction (HTXRD) analysis of a gas/solid [TiF(4)(g)/SiO(2)(s)] reaction involving a halide gas reactant formed at elevated temperatures (up to 350 degrees C) from a condensed source (TiF(4) powder) sealed within the chamber. The reaction chamber possessed x-ray transparent windows comprised of a thin (13 microm) internal layer of Al foil and a thicker (125 microm) external Kapton film. After sealing the SiO(2) specimens (diatom frustules or Stober spheres) above TiF(4) powder within the reaction chamber, the chamber was heated to a temperature in the range of 160-350 degrees C to allow for internal generation of TiF(4)(g).