Highly conductive anion exchange membrane for high power density fuel-cell performance.

Anion exchange membrane fuel cells (AEMFCs) are regarded as a new generation of fuel cell technology that has the potential to overcome many obstacles of the mainstream proton exchange membrane fuel cells (PEMFCs) in cost, catalyst stability, efficiency, and system size. However, the low ionic conductivity and poor thermal stability of current anion exchange membranes (AEMs) have been the key factors limiting the performance of AEMFCs. In this study, an AEM made of styrenic diblock copolymer with a quaternary ammonium-functionalized hydrophilic block and a cross-linkable hydrophobic block and possessing bicontinuous phases of a hydrophobic network and hydrophilic conduction paths was found to have high ionic conductivity at 98 mS cm(-1) and controlled membrane swelling with water uptake at 117 wt % at 22 °C.

Relationships between Structure and Alkaline Stability of Imidazolium Cations for Fuel Cell Membrane Applications.

Anion exchange membranes have substantial potential to be useful in methanol fuel cells due to the viability of non-noble metal electrocatalysts at high pH and increases in the oxidation rate of methanol in alkaline conditions. However, long-term stability of the cationic moiety has been an issue, and imidazoliums have recently attracted attention as candidates for stable cations. The prevailing strategy for increasing the stability of the imidazolium has involved adding sterically hindering groups at the 2 position.

Structure-property optimizations in donor polymers via electronics, substituents, and side chains toward high efficiency solar cells.

Many advances in organic photovoltaic efficiency are not yet fully understood and new insight into structure-property relationships is required to push this technology into broad commercial use. The aim of this article is not to comprehensively review recent work, but to provide commentary on recent successes and forecast where researchers should look to enhance the efficiency of photovoltaics. By lowering the LUMO level, utilizing electron-withdrawing substituents advantageously, and employing appropriate side chains on donor polymers, researchers can elucidate further aspects of polymer-PCBM interactions while ultimately developing materials that will push past 10% efficiency.

Parallel-like bulk heterojunction polymer solar cells.

Here we demonstrate a conceptually new approach, the parallel-like bulk heterojunction (PBHJ), which maintains the simple device configuration and low-cost processing of single-junction BHJ cells while inheriting the major benefit of incorporating multiple polymers in tandem cells. In this PBHJ, free charge carriers travel through their corresponding donor-polymer-linked channels and fullerene-enriched domain to the electrodes, equivalent to a parallel-like connection. The short-circuit current (J(sc)) of the PBHJ solar cell is nearly identical to the sum of those of the individual "subcells", while the open-circuit voltage (V(oc)) is between those of the "subcells".

Solution-processed flexible polymer solar cells with silver nanowire electrodes.

The conventional anode for organic photovoltaics (OPVs), indium tin oxide (ITO), is expensive and brittle, and thus is not suitable for use in roll-to-roll manufacturing of OPVs. In this study, fully solution-processed polymer bulk heterojunction (BHJ) solar cells with anodes made from silver nanowires (Ag NWs) have been successfully fabricated with a configuration of Ag NWs/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/polymer:phenyl-C(61)-butyric acid methyl ester (PCBM)/Ca/Al. Efficiencies of 2.