Anisotropic Superhydrophobic Properties Replicated from Leek Leaves.

A bio-inspired approach to fabricate robust superhydrophobic (SHB) surfaces with anisotropic properties replicated from a leek leaf is presented. The polydimethylsiloxane (PDMS) replica surfaces exhibit anisotropic wetting, anti-icing, and light scattering properties due to microgrooves replicated from leek leaves. Superhydrophobicity is achieved by a novel modified candle soot (CS) coating that mimics leek's epicuticular wax.

Ultrasensitive Monolithic Dopamine Microsensors Employing Vertically Aligned Carbon Nanofibers.

Brain-on-Chip devices, which facilitate on-chip cultures of neurons to simulate brain functions, are receiving tremendous attention from both fundamental and clinical research. Consequently, microsensors are being developed to accomplish real-time monitoring of neurotransmitters, which are the benchmarks for neuron network operation. Among these, electrochemical sensors have emerged as promising candidates for detecting a critical neurotransmitter, dopamine.

Microalgae and kraft lignin stabilized cellulosic wet foams for camouflage.

Plants, animals, and humans use camouflage to blend in with their surroundings. The camouflage is achieved with different combinations of colors, patterns, and morphologies. In stealth applications, the simplest camouflage uses textiles colored similarly to the environment to create an illusion.

Fabrication of elastic, conductive, wear-resistant superhydrophobic composite material.

A polydimethylsiloxane (PDMS)/Cu superhydrophobic composite material is fabricated by wet etching, electroless plating, and polymer casting. The surface topography of the material emerges from hierarchical micro/nanoscale structures of etched aluminum, which are rigorously copied by plated copper. The resulting material is superhydrophobic (contact angle > 170°, sliding angle < 7° with 7 µL droplets), electrically conductive, elastic and wear resistant.

A Microfluidic Chip Architecture Enabling a Hypoxic Microenvironment and Nitric Oxide Delivery in Cell Culture.

A hypoxic (low oxygen level) microenvironment and nitric oxide paracrine signaling play important roles in the control of both biological and pathological cell responses. In this study, we present a microfluidic chip architecture for nitric oxide delivery under a hypoxic microenvironment in human embryonic kidney cells (HEK-293). The chip utilizes two separate, but interdigitated microfluidic channels.

Superhydrophobic Antireflection Coating on Glass Using Grass-like Alumina and Fluoropolymer.

This work presents a superhydrophobic antireflective (AR) coating on glass. The coating consists of a grass-like alumina layer capped with plasma-deposited fluoropolymer. The grass-like alumina is formed by hot water treatment of atomic layer-deposited alumina on glass, and the fluoropolymer is plasma-deposited from CHF.

Novel carbon film induces precocious calcium oscillation to promote neuronal cell maturation.

Different types of carbon materials are biocompatible with neural cells and can promote maturation. The mechanism of this effect is not clear. Here we have tested the capacity of a carbon material composed of amorphous sp carbon backbone, embedded with a percolating network of sp carbon domains to sustain neuronal cultures.

Tunable and Magnetic Thiol-ene Micropillar Arrays.

Tunable and responsive surfaces offer routes to multiple functionalities ranging from superhydrophobic surfaces to controlled adhesion. Inspired by cilia structure in the respiratory pathway, magnetically responsive periodic arrays of flexible and magnetic thiol-ene micropillars are fabricated. Omnidirectional collective bending of the pillar array in magnetic field is shown.

Disposable Microfluidic Sensor Based on Nanocellulose for Glucose Detection.

Point-of-care devices that are inexpensive, disposable, and environmentally friendly are becoming increasingly predominant in the field of biosensing and biodiagnostics. Here, microfluidics is a suitable option to endow portability and minimal reagent and material consumption. Nanocellulose is introduced to manufacture microfluidic channels and as a storage and immobilization compartment of glucose oxidase.

Fabrication of Micro- and Nanopillars from Pyrolytic Carbon and Tetrahedral Amorphous Carbon.

Pattern formation of pyrolyzed carbon (PyC) and tetrahedral amorphous carbon (ta-C) thin films were investigated at micro- and nanoscale. Micro- and nanopillars were fabricated from both materials, and their biocompatibility was studied with cell viability tests. Carbon materials are known to be very challenging to pattern.

Practical realization of a sub-λ/2 acoustic jet.

Studies in optics and acoustics have employed metamaterial lenses to achieve sub-wavelength localization, e.g. a recently introduced concept called 'acoustojet' which in simulations localizes acoustic energy to a spot smaller than λ/2.

Sacrificial Layer Technique for Releasing Metallized Multilayer SU-8 Devices.

The low fabrication cost of SU-8-based devices has opened the fields of point-of-care devices (POC), µTAS and Lab-on-Chip technologies, which call for cheap and disposable devices. Often this translates to free-standing, suspended devices and a reusable carrier wafer. This necessitates a sacrificial layer to release the devices from the substrates.

Controlled communication between physically separated bacterial populations in a microfluidic device.

The engineering of microbial systems increasingly strives to achieve a co-existence and co-functioning of different populations. By creating interactions, one can utilize combinations of cells where each population has a specialized function, such as regulation or sharing of metabolic burden. Here we describe a microfluidic system that enables long-term and independent growth of fixed and distinctly separate microbial populations, while allowing communication through a thin nano-cellulose filter.

A microfluidic oxygen sink to create a targeted cellular hypoxic microenvironment under ambient atmospheric conditions.

Unlabelled: Physiological oxygen levels within the tissue microenvironment are usually lower than 14%, in stem cell niches these levels can be as low as 0-1%. In cell cultures, such low oxygen levels are usually mimicked by altering the global culture environment either by O removal (vacuum or oxygen absorption) or by N supplementation for O replacement. To generate a targeted cellular hypoxic microenvironment under ambient atmospheric conditions, we characterised the ability of the dissolved oxygen-depleting sodium sulfite to generate an in-liquid oxygen sink.

Superhydrophobic Blood-Repellent Surfaces.

Superhydrophobic surfaces repel water and, in some cases, other liquids as well. The repellency is caused by topographical features at the nano-/microscale and low surface energy. Blood is a challenging liquid to repel due to its high propensity for activation of intrinsic hemostatic mechanisms, induction of coagulation, and platelet activation upon contact with foreign surfaces.

SU-8 based pyrolytic carbon for the electrochemical detection of dopamine.

Here we investigated the electrochemical properties and dopamine (DA) detection capability of SU-8 photoresist based pyrolytic carbon (PyC) as well as its biocompatibility with neural cells. This approach is compatible with microfabrication techniques which is crucial for device development. X-ray photoelectron spectroscopy shows that PyC consists 98.

Water and Blood Repellent Flexible Tubes.

A top-down scalable method to produce flexible water and blood repellent tubes is introduced. The method is based on replication of overhanging nanostructures from an aluminum tube template to polydimethylsiloxane (PDMS) via atomic layer deposition (ALD) assisted sacrificial etching. The nanostructured PDMS/titania tubes are superhydrophobic with water contact angles 163 ± 1° (advancing) and 157 ± 1° (receding) without any further coating.

Efficient Catalytic Microreactors with Atomic-Layer-Deposited Platinum Nanoparticles on Oxide Support.

Microreactors attract a significant interest for chemical synthesis due to the benefits of small scales such as high surface to volume ratio, rapid thermal ramping, and well-understood laminar flows. The suitability of atomic layer deposition for application of both the nanoparticle catalyst and the support material on the surfaces of channels of microfabricated silicon microreactors is demonstrated in this research. Continuous-flow hydrogenation of propene into propane at low temperatures with TiO -supported catalytic Pt nanoparticles was used as a model reaction.

Friction and Wetting Transitions of Magnetic Droplets on Micropillared Superhydrophobic Surfaces.

Reliable characterization of wetting properties is essential for the development and optimization of superhydrophobic surfaces. Here, the dynamics of superhydrophobicity is studied including droplet friction and wetting transitions by using droplet oscillations on micropillared surfaces. Analyzing droplet oscillations by high-speed camera makes it possible to obtain energy dissipation parameters such as contact angle hysteresis force and viscous damping coefficients, which indicate pinning and viscous losses, respectively.

Inkjet printed silver electrodes on macroporous paper for a paper-based isoelectric focusing device.

We demonstrate a combined printing process utilizing inkjet printing of silver electrodes and solid-ink technology for printing hydrophobic wax barriers for fabricating paper microfluidic devices with integrated electrodes. Optimized printing parameters are given for achieving conducting silver lines on the top of macroporous chromatography paper down to 250 m-300 m resolution. Electrical characterization and wicking experiments demonstrate that the printed silver patterns are simultaneously conductive and porous enough to allow reliable capillary wicking across the electrodes.

Non-Lithographic Silicon Micromachining Using Inkjet and Chemical Etching.

We introduce a non-lithographical and vacuum-free method to pattern silicon. The method combines inkjet printing and metal assisted chemical etching (MaCE); we call this method "INKMAC". A commercial silver ink is printed on top of a silicon surface to create the catalytic patterns for MaCE.

Cellulose Nanofibril Film as a Piezoelectric Sensor Material.

Self-standing films (45 μm thick) of native cellulose nanofibrils (CNFs) were synthesized and characterized for their piezoelectric response. The surface and the microstructure of the films were evaluated with image-based analysis and scanning electron microscopy (SEM). The measured dielectric properties of the films at 1 kHz and 9.

Axonal Kainate Receptors Modulate the Strength of Efferent Connectivity by Regulating Presynaptic Differentiation.

Kainate type of glutamate receptors (KARs) are highly expressed during early brain development and may influence refinement of the circuitry, via modulating synaptic transmission and plasticity. KARs are also localized to axons, however, their exact roles in regulating presynaptic processes remain controversial. Here, we have used a microfluidic chamber system allowing specific manipulation of KARs in presynaptic neurons to study their functions in synaptic development and function in vitro.

Amplified and localized photoswitching of TiO2 by micro- and nanostructuring.

Fast photoswitching of wetting properties is important for the development of micro/nanofluidic systems and lab-on-a-chip devices. Here, we show how structuring the surface amplifies photoswitching properties. Atomic layer-deposited titanium dioxide (TiO2) has phototunable hydrophilic properties due to its surface chemistry, but microscale overhang pillars and additional nanoscale topography can override the chemistry and make the surface superhydrophobic.