ACS Appl Mater Interfaces
June 2024
Efficient separation of Kr from Kr/Xe mixtures is pivotal in nuclear waste management and dark matter research. Thus far, scientists have encountered a formidable challenge: the absence of a material with the ability to selectively adsorb Kr over Xe at room temperature. This study presents a groundbreaking transformation of the renowned metal-organic framework (MOF) CuBTC, previously acknowledged for its Xe adsorption affinity, into an unparalleled Kr-selective adsorbent.
View Article and Find Full Text PDFMOF-based mixed-matrix membranes (MMMs) have attracted considerable attention due to their tremendous separation performance and facile processability. In large-scale applications such as CO separation from flue gas, it is necessary to have high gas permeance, which can be achieved using thin membranes. However, there are only a handful of MOF MMMs that are fabricated in the form of thin-film composite (TFC) membranes.
View Article and Find Full Text PDFCapture and storage of volatile radionuclides that result from processing of used nuclear fuel is a major challenge. Solid adsorbents, in particular ultra-microporous metal-organic frameworks, could be effective in capturing these volatile radionuclides, including Kr. However, metal-organic frameworks are found to have higher affinity for xenon than for krypton, and have comparable affinity for Kr and N.
View Article and Find Full Text PDFThe magnetic susceptibility of synthesized magnetite (FeO) microspheres was found to decline after the growth of a metal-organic framework (MOF) shell on the magnetite core. Detailed structural analysis of the core-shell particles using scanning electron microscopy, transmission electron microscopy, atom probe tomography, andFe-Mössbauer spectroscopy suggests that the distribution of MOF precursors inside the magnetic core resulted in the oxidation of the iron oxide core.
View Article and Find Full Text PDFXenon is known to be a very efficient anesthetic gas, but its cost prohibits the wider use in medical industry and other potential applications. It has been shown that Xe recovery and recycling from anesthetic gas mixtures can significantly reduce its cost as anesthetic. The current technology uses series of adsorbent columns followed by low-temperature distillation to recover Xe; this method is expensive to use in medical facilities.
View Article and Find Full Text PDFDynamic and flexible metal-organic frameworks (MOFs) that respond to external stimuli, such as stress, light, heat, and the presence of guest molecules, hold promise for applications in chemical sensing, drug delivery, gas separations, and catalysis. A greater understanding of the relationship between flexible constituents in MOFs and gas adsorption may enable the rational design of MOFs with dynamic moieties and stimuli-responsive behavior. Here, we detail the effect of subtle structural changes upon the gas sorption behavior of two "SIFSIX" pillared square grid frameworks, namely SIFSIX-3-M (M = Ni, Fe).
View Article and Find Full Text PDFEfficient and cost-effective removal of radioactive pertechnetate anions from nuclear waste is a key challenge to mitigate long-term nuclear waste storage issues. Traditional materials such as resins and layered double hydroxides (LDHs) were evaluated for their pertechnetate or perrhenate (the non-radioactive surrogate) removal capacity, but there is room for improvement in terms of capacity, selectivity and kinetics. A series of functionalized hierarchical porous frameworks were evaluated for their perrhenate removal capacity in the presence of other competing anions.
View Article and Find Full Text PDFThe synthetic approaches for fine-tuning the structural properties of coordination polymers or metal organic frameworks have exponentially grown during the past decade. This is due to the control over the properties of the resulting structures such as stability, pore size, pore chemistry and surface area for myriad possible applications. Herein, we present a new class of porous materials called Coordination Covalent Frameworks (CCFs) that were designed and effectively synthesized using a two-step reticular chemistry approach.
View Article and Find Full Text PDFHerein we demonstrate that chabazite zeolite SAPO-34 membranes effectively separated Kr/Xe gas mixtures at industrially relevant compositions. Control over membrane thickness and average crystal size led to industrial range permeances and high separation selectivities. Specifically, SAPO-34 membranes can separate Kr/Xe mixtures with Kr permeances as high as 1.
View Article and Find Full Text PDFThe demand for Xe/Kr separation continues to grow due to the industrial significance of high-purity Xe gas. Current separation processes rely on energy intensive cryogenic distillation. Therefore, less energy intensive alternatives, such as physisorptive separation, using porous materials, are required.
View Article and Find Full Text PDFCorrection for 'Hydrophobic pillared square grids for selective removal of CO2 from simulated flue gas' by Sameh K. Elsaidi et al., Chem.
View Article and Find Full Text PDFCapture of CO2 from flue gas is considered to be a feasible approach to mitigate the effects of anthropogenic emission of CO2. Herein we report that an isostructural family of metal organic materials (MOMs) of general formula [M(linker)2(pillar)], linker = pyrazine, pillar = hexaflourosilicate and M = Zn, Cu, Ni and Co exhibits highly selective removal of CO2 from dry and wet simulated flue gas. Two members of the family, M = Ni and Co, SIFSIX-3-Ni and SIFSIX-3-Co, respectively, are reported for the first time and compared with the previously reported Zn and Cu analogs.
View Article and Find Full Text PDFGrand canonical Monte Carlo (GCMC) simulations of CO2 and CH4 sorption and separation were performed in dia-7i-1-Co, a metal-organic material (MOM) consisting of a 7-fold interpenetrated net of Co(2+) ions coordinated to 4-(2-(4-pyridyl)ethenyl)benzoate linkers. This MOM shows high affinity toward CH4 at low loading due to the presence of narrow, close fitting, one-dimensional hydrophobic channels-this makes the MOM relevant for applications in low-pressure methane storage. The calculated CO2 and CH4 sorption isotherms and isosteric heat of adsorption, Qst, values in dia-7i-1-Co are in good agreement with the corresponding experimental results for all state points considered.
View Article and Find Full Text PDFWe report the synthesis, structure, and sorption properties of a family of eight diamondoid (dia) metal-organic materials (MOMs) that are sustained by Co(II) or Zn(II) cations linked by one of three rigid ligands: 4-(2-(4-pyridyl)ethenyl)benzoate (1), 4-(pyridin-4-yl)benzoate (2), and 4-(pyridin-4-yl)acrylate (3). Pore size control in this family of dia nets was exerted by two approaches: changing the length of the linker ligand from 1 to 3, and using solvent as a template to control the level of interpenetration in nets based upon 1 and 3. The resulting MOMs, dia-8i-1, dia-5i-3, dia-7i-1-Zn, dia-7i-1-Co, dia-4i-3-a, dia-4i-3-b, dia-4i-2, and dia-4i-1, exhibit 1D channels with pore limiting diameters (PLDs) of 1.
View Article and Find Full Text PDFChem Commun (Camb)
October 2013
The use of WO4(2-) instead of CrO4(2-) or MoO4(2-) as an angular pillar in topology nets has afforded two isostructural porous nets of formula [M(bpe)2WO4] (M = Co or Ni, bpe = 1,2-(4-pyridyl)ethene). The Ni variant, WOFOUR-1-Ni, is highly selective towards CO2 thanks to its exceptionally high isosteric heat of adsorption (Qst) of -65.5 kJ mol(-1) at zero loading.
View Article and Find Full Text PDFTwo porous nets have been prepared via a 2-step crystal engineering approach that links decorated trigonal prismatic [Cr3(μ3-O)(CO2)6] and [Cu3(μ3-Cl)(RNH2)6Cl6] molecular building blocks, MBBs. tp-PMBB-5-acs-1 is a rare example of a rigid acs underlying net whereas tp-PMBB-6-stp-1, an stp underlying net, exhibits free NH2 groups in its channels and a relatively high isosteric heat of adsorption for CO2.
View Article and Find Full Text PDFA novel 4(8).6(7) topology metal-organic material (MOM) platform of formula [M(bpe)(2)(M'O(4))] (M = Co or Ni; bpe = 1,2-bis(4-pyridyl)ethene; M' = Mo or Cr) has been synthesized and evaluated in the context of gas sorption. These MOMs have been assigned RCSR code mmo and are uninodal 6-connected nets.
View Article and Find Full Text PDF