An aerosol nanocomposite microparticle formulation using rifampicin-cyclodextrin inclusion complexes for the treatment of pulmonary diseases.

Rifampicin (RIF) is commonly used in the treatment of tuberculosis (TB), a bacterium that currently infects one fourth of the world's population. Despite the effectiveness of RIF in treating TB, current RIF treatment regimens require frequent and prolonged dosing, leading to decreased patient compliance and, ultimately, increased mortality rates. This project aims to provide an alternative to oral RIF by means of an inhalable spray-dried formulation.

Development of Aerosol Dry Powder Chemotherapeutic-Loaded Microparticles for the Treatment of Lung Cancer.

Lung cancer is the leading cause of cancer-related deaths worldwide, resulting in the highest mortality rates among both men and women with respect to all other types of cancer. Difficulties in treating lung cancer arise from late-stage diagnoses and tumor heterogeneity and current treatment involves a combination of chemotherapeutics, surgery, and radiation. Chemotherapeutics administered systemically can lead to undesirable side effects and severe off-site toxicity.

Lung cell membrane-coated nanoparticles capable of enhanced internalization and translocation in pulmonary epithelial cells.

Cell membrane-coated nanoparticles (CMCNP), which involve coating a core nanoparticle (NP) with cell membranes, have been gaining attention due to their ability to mimic the properties of the cells, allowing for enhanced delivery and efficacy of therapeutics. Two CMCNP systems comprised of an acetalated dextran-based NP core loaded with curcumin (CUR) coated with cell membranes derived from pulmonary epithelial cells were developed. The NP were approximately 200 nm and their surface charges varied based on their coating, where CMCNP systems exhibited negative surface charge like natural cell membranes.

Development of Spray-Dried Cyclodextrin-Based Pediatric Anti-HIV Formulations.

The human immunodeficiency virus (HIV) impacts up to 37 million people globally, of which 1.8 million are children. To date, there is no cure for HIV, although treatment options such as antiretroviral therapy (ART) are available.

Development and Evaluation of Paclitaxel-Loaded Aerosol Nanocomposite Microparticles and Their Efficacy Against Air-Grown Lung Cancer Tumor Spheroids.

Paclitaxel (as intravenous Taxol) is one of the most applied chemotherapeutics used for the treatment of lung cancer. This project involves the development of a dry powder nanocomposite microparticle (nCmP) aerosol containing PTX-loaded nanoparticles (NP) to be delivered via a dry powder inhaler to the lungs for the treatment of non-small cell lung cancer (NSCLC). Nanoparticles were formulated by a single emulsion and solvent evaporation method, producing smooth, neutral PTX NP of approximately 200 nm in size.

Radiofrequency and Near-Infrared Responsive Core-Shell Nanostructures Using Layersome Templates for Cancer Treatment.

We report a multifunctional nanotherapeutic platform based on liposomes loaded with drug and iron oxide nanoparticles (IONs) coated with a gold nanoshell synthesized using a polyelectrolyte (layersome) soft templating technique. IONs and gold nanoshells were used to provide combined hyperthermia and triggered drug release via radio frequency (RF) or near-infrared (NIR) stimulation. IONs and the anticancer drug doxorubicin (DOX) were coencapsulated inside liposomes composed of zwitterionic phosphatidylcholine, anionic phosphatidylglycerol, and cholesterol lipids.

Sustained release of a model water-soluble compound via dry powder aerosolizable acetalated dextran microparticles.

To design and characterize aerosol microparticles (MP) to provide sustained release of the water-soluble compound sulforhodamine B (SRB) and achieve effective aerosol dispersion. Modulating the release of water-soluble compounds remains a challenge in pulmonary drug delivery. SRB and water made up an aqueous solution, while acetalated dextran (Ac-Dex) and isopropyl alcohol made up an organic solution.

Optimization of Acetalated Dextran-Based Nanocomposite Microparticles for Deep Lung Delivery of Therapeutics via Spray-Drying.

Nanocomposite microparticle (nCmP) systems exhibit promising potential in the application of therapeutics for pulmonary drug delivery. This work aimed at identifying the optimal spray-drying condition(s) to prepare nCmP with specific drug delivery properties including small aerodynamic diameter, effective nanoparticle (NP) redispersion upon nCmP exposure to an aqueous solution, high drug loading, and low water content. Acetalated dextran (Ac-Dex) was used to form NPs, curcumin was used as a model drug, and mannitol was the excipient in the nCmP formulation.

Coadministration of a tumor-penetrating peptide improves the therapeutic efficacy of paclitaxel in a novel air-grown lung cancer 3D spheroid model.

Three-dimensional (3 D) cell culture platforms are increasingly being used in cancer research and drug development since they mimic avascular tumors in vitro. In this study, we focused on the development of a novel air-grown multicellular spheroid (MCS) model to mimic in vivo tumors for understanding lung cancer biology and improvement in the evaluation of aerosol anticancer therapeutics. 3 D MCS were formed using A549 lung adenocarcinoma cells, comprising cellular heterogeneity with respect to different proliferative and metabolic gradients.

Development of Aerosol Phospholipid Microparticles for the Treatment of Pulmonary Hypertension.

Pulmonary arterial hypertension (PAH) is an incurable cardiovascular disease characterized by high blood pressure in the arteries leading from the heart to the lungs. Over two million people in the USA are diagnosed with PAH annually and the typical survival rate is only 3 years after diagnosis. Current treatments are insufficient because of limited bioavailability, toxicity, and costs associated with approved therapeutics.

Development and physicochemical characterization of acetalated dextran aerosol particle systems for deep lung delivery.

Biocompatible, biodegradable polymers are commonly used as excipients to improve the drug delivery properties of aerosol formulations, in which acetalated dextran (Ac-Dex) exhibits promising potential as a polymer in various therapeutic applications. Despite this promise, there is no comprehensive study on the use of Ac-Dex as an excipient for dry powder aerosol formulations. In this study, we developed and characterized pulmonary drug delivery aerosol microparticle systems based on spray-dried Ac-Dex with capabilities of (1) delivering therapeutics to the deep lung, (2) targeting the particles to a desired location within the lungs, and (3) releasing the therapeutics in a controlled fashion.

Nanocomposite microparticles (nCmP) for the delivery of tacrolimus in the treatment of pulmonary arterial hypertension.

Tacrolimus (TAC) has exhibited promising therapeutic potential in the treatment of pulmonary arterial hypertension (PAH); however, its application is prevented by its poor solubility, instability, poor bioavailability, and negative systemic side effects. To overcome the obstacles of using TAC for the treatment of PAH, we developed nanocomposite microparticles (nCmP) for the pulmonary delivery of tacrolimus in the form of dry powder aerosols. These particles can provide targeted pulmonary delivery, improved solubility of tacrolimus, the potential of penetration through mucus barrier, and controlled drug release.

Synthesis and Characterization of Nanocomposite Microparticles (nCmP) for the Treatment of Cystic Fibrosis-Related Infections.

Purpose: Pulmonary antibiotic delivery is recommended as maintenance therapy for cystic fibrosis (CF) patients who experience chronic infections. However, abnormally thick and sticky mucus present in the respiratory tract of CF patients impairs mucus penetration and limits the efficacy of inhaled antibiotics. To overcome the obstacles of pulmonary antibiotic delivery, we have developed nanocomposite microparticles (nCmP) for the inhalation application of antibiotics in the form of dry powder aerosols.

Development of three-dimensional lung multicellular spheroids in air- and liquid-interface culture for the evaluation of anticancer therapeutics.

Three-dimensional (3D) lung multicellular spheroids (MCS) in liquid-covered culture (LCC) and air-interface culture (AIC) conditions have both been developed for the evaluation of aerosol anticancer therapeutics in solution and aerosols, respectively. The MCS were formed by seeding lung cancer cells on top of collagen where they formed spheroids due to the prevalence of cell-to-cell interactions. LCC MCS were exposed to paclitaxel (PTX) in media whereas AIC MCS were exposed to dry powder PEGylated phospholipid aerosol microparticles containing paclitaxel.

In Vitro Pulmonary Cell Culture in Pharmaceutical Inhalation Aerosol Delivery: 2-D, 3-D, and In Situ Bioimpactor Models.

Background: The use of non-invasive inhaled aerosols for pulmonary drug delivery continues to grow. This is due to the many unique advantages this delivery route offers for the treatment of both local and systemic diseases. The physicochemical properties of the formulated drugs as well as the physiology of the lungs play a key role in both the deposition and absorption of the particles.

Formulation and characterization of inhalable magnetic nanocomposite microparticles (MnMs) for targeted pulmonary delivery via spray drying.

Targeted pulmonary delivery facilitates the direct application of bioactive materials to the lungs in a controlled manner and provides an exciting platform for targeting magnetic nanoparticles (MNPs) to the lungs. Iron oxide MNPs remotely heat in the presence of an alternating magnetic field (AMF) providing unique opportunities for therapeutic applications such as hyperthermia. In this study, spray drying was used to formulate magnetic nanocomposite microparticles (MnMs) consisting of iron oxide MNPs and d-mannitol.

High-performing dry powder inhalers of paclitaxel DPPC/DPPG lung surfactant-mimic multifunctional particles in lung cancer: physicochemical characterization, in vitro aerosol dispersion, and cellular studies.

Inhalable lung surfactant-based carriers composed of synthetic phospholipids, dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG), along with paclitaxel (PTX), were designed and optimized as respirable dry powders using organic solution co-spray-drying particle engineering design. These materials can be used to deliver and treat a wide variety of pulmonary diseases with this current work focusing on lung cancer. In particular, this is the first time dry powder lung surfactant-based particles have been developed and characterized for this purpose.

Synthesis and characterization of CREKA-conjugated iron oxide nanoparticles for hyperthermia applications.

One of the current challenges in the systemic delivery of nanoparticles in cancer therapy applications is the lack of effective tumor localization. Iron oxide nanoparticles (IONPs) coated with crosslinked dextran were functionalized with the tumor-homing peptide CREKA, which binds to fibrinogen complexes in the extracellular matrix of tumors. This allows for the homing of these nanoparticles to tumor tissue.

Characterization and aerosol dispersion performance of advanced spray-dried chemotherapeutic PEGylated phospholipid particles for dry powder inhalation delivery in lung cancer.

Pulmonary inhalation chemotherapeutic drug delivery offers many advantages for lung cancer patients in comparison to conventional systemic chemotherapy. Inhalable particles are advantageous in their ability to deliver drug deep in the lung by utilizing optimally sized particles and higher local drug dose delivery. In this work, spray-dried and co-spray dried inhalable lung surfactant-mimic PEGylated lipopolymers as microparticulate/nanoparticulate dry powders containing paclitaxel were rationally designed via organic solution advanced spray drying (no water) in closed-mode from dilute concentration feed solution.

Characterization of PEG-iron oxide hydrogel nanocomposites for dual hyperthermia and paclitaxel delivery.

Hyperthermia, the heating of tissue from 41 to 45 °C, has been shown to improve the efficacy of cancer therapy when used in conjunction with irradiation and/or chemotherapy. In this work, hydrogel nanocomposites have been developed that can control the delivery of both heat and a chemotherapeutic agent (e.g.

Design, physicochemical characterization, and optimization of organic solution advanced spray-dried inhalable dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylethanolamine poly(ethylene glycol) (DPPE-PEG) microparticles and nanoparticles for targeted respiratory nanomedicine delivery as dry powder inhalation aerosols.

Novel advanced spray-dried and co-spray-dried inhalable lung surfactant-mimic phospholipid and poly(ethylene glycol) (PEG)ylated lipopolymers as microparticulate/nanoparticulate dry powders of biodegradable biocompatible lipopolymers were rationally formulated via an organic solution advanced spray-drying process in closed mode using various phospholipid formulations and rationally chosen spray-drying pump rates. Ratios of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylethanolamine PEG (DPPE-PEG) with varying PEG lengths were mixed in a dilute methanol solution. Scanning electron microscopy images showed the smooth, spherical particle morphology of the inhalable particles.

Enhanced stability of horseradish peroxidase encapsulated in acetalated dextran microparticles stored outside cold chain conditions.

Micro- and nanoparticles have been shown to improve the efficacy of safer protein-based (subunit) vaccines. Here, we evaluate a method of improving the vaccine stability outside cold chain conditions by encapsulation of a model enzyme, horseradish peroxidase (HRP), in an acid-sensitive, tunable biodegradable polymer, acetalated dextran (Ac-DEX). Vaccines that are stable outside the cold chain would be desirable for use in developing nations.

Controlled synergistic delivery of paclitaxel and heat from poly(β-amino ester)/iron oxide-based hydrogel nanocomposites.

Poly(β-amino ester) (PBAE) biodegradable hydrogels were investigated for potential combined chemotherapeutic and heat delivery in the synergistic treatment of cancer. Hyperthermia, the heating of cancerous tissue from 41 to 45 °C, increases the efficacy of conventional cancer therapies such as irradiation and chemotherapy. The hydrogel nanocomposites in this work provide a drug delivery vehicle (via the biodegradable PBAE polymer network) and the ability to be heated remotely upon exposure to an alternating magnetic field (via iron oxide nanoparticles incorporated into the hydrogel matrix).

Synthesis, optimization, and characterization of camptothecin-loaded acetalated dextran porous microparticles for pulmonary delivery.

We propose the use of a new biopolymer, acetalated dextran (Ac-DEX), to synthesize porous microparticles for pulmonary drug delivery. Ac-DEX is derived from the polysaccharide dextran and, unlike polyesters, has tunable degradation from days to months and pH neutral degradation products. Ac-DEX microparticles fabricated through emulsion techniques were optimized using a variety of postprocessing techniques to enhance the respirable fraction for pulmonary delivery.

Optimization of rapamycin-loaded acetalated dextran microparticles for immunosuppression.

Immunosuppressive drugs can treat autoimmune disorders and limit rejection with organ transplants. However, delivering immunosuppressants like rapamycin systemically can have harmful side-effects. We aim to potentially reduce these toxic side-effects by encapsulating rapamycin in a polymeric microparticle to passively target phagocytes, the cells integral in immunosuppression.