Functionalization of TiC MXene with Diethylenetriamine for a Column-Based Solid-Phase Extraction of Heavy Metals.

Transition metal carbides, nitrides, and carbonitrides, known as MXenes, are attracting attention for their potential application in trace detection of heavy metals. This study presents diethylenetriamine-functionalized TiC MXene for trace detection of cadmium and lead ions. Functionalization of TiC significantly improves the adsorption properties of MXenes by replacing native functional groups with silane moieties that contain three amine groups, offering higher affinity for heavy metals.

Layer-Dependent Gas Sensing Mechanism of 2D Titanium Carbide (TiCT) MXene.

Monolayers of TiCT MXene and bilayer structures formed by partially overlapping monolayer flakes exhibit opposite sensing responses to a large scope of molecular analytes. When exposed to reducing analytes, monolayer MXene flakes show increased electrical conductivity, i.e.

Exome sequencing reveals neurodevelopmental genes in simplex consanguineous Iranian families with syndromic autism.

Background And Objective: Autosomal recessive genetic disorders pose significant health challenges in regions where consanguineous marriages are prevalent. The utilization of exome sequencing as a frequently employed methodology has enabled a clear delineation of diagnostic efficacy and mode of inheritance within multiplex consanguineous families. However, these aspects remain less elucidated within simplex families.

Broadening the phenotype and genotype spectrum of novel mutations in pontocerebellar hypoplasia with a comprehensive molecular literature review.

Background: Pontocerebellar hypoplasia is an umbrella term describing a heterogeneous group of prenatal neurodegenerative disorders mostly affecting the pons and cerebellum, with 17 types associated with 25 genes. However, some types of PCH lack sufficient information, which highlights the importance of investigating and introducing more cases to further elucidate the clinical, radiological, and biochemical features of these disorders. The aim of this study is to provide an in-depth review of PCH and to identify disease genes and their inheritance patterns in 12 distinct Iranian families with clinically confirmed PCH.

Interlayer Incorporation of A-Elements into MXenes Via Selective Etching of A' from MA'A″C MAX Phases.

MXenes are a large family of two-dimensional materials with a general formula MXT, where M is a transition metal, X = C and/or N, and T represents surface functional groups. MXenes are synthesized by etching A-elements from layered MAX phases with a composition of MAX. As over 20 different chemical elements were shown to form A-layers in various MAX phases, we propose that they can provide an abundant source of very diverse MXene-based materials.

Extending and outlining the genotypic and phenotypic spectrum of novel mutations of NALCN gene in IHPRF1 syndrome: identifying recurrent urinary tract infection.

Infantile hypotonia with psychomotor retardation and characteristic facies 1 (IHPRF1) is caused by biallelic mutations in the NALCN gene, the major ion channel responsible for the background Na + conduction in neurons. Through whole-exome sequencing (WES), we report three novel homozygous variants in three families, including c.1434 + 1G > A, c.

High-yield fabrication of electromechanical devices based on suspended TiCT MXene monolayers.

MXenes, two-dimensional transition metal carbides, nitrides, and carbonitrides, are known for their exceptional electronic and mechanical properties. Yet, the experimental efforts toward the realization of MXene-based nanoelectromechanical systems (NEMS) combining electrical and mechanical functionalities of MXenes at the nanoscale remain very limited. Here, we demonstrate a high-yield fabrication of the electromechanical devices based on individual suspended monolayer MXene flakes.

Bifunctional Amine- and Thiol-Modified TiCT MXene for Trace Detection of Heavy Metals.

Surface functionalization of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides, also known as MXenes, is a powerful approach for modification of their physical and chemical properties for new applications. In this study, we demonstrate the synthesis of a bifunctional TiCT MXene modified with amine and thiol groups through a facile condensation reaction. We successfully employed the resulting NH/SH-TiCT MXene as a solid phase in the ultrasonic-assisted dispersive micro solid-phase extraction (d-μ-SPE) method for the analytical determination of heavy metals at trace levels in food and soil samples.

Antifungal effects of volatile compounds produced by Tetrapisispora sp. strain 111A-NL1 as a new biocontrol agent on the strawberry grey mold disease.

An antagonistic yeast strain was isolated from the strawberry fruit cv. Paros, and its antifungal properties against Botrytis cinerea causal agent of strawberry grey mold disease were evaluated under in vitro and in vivo experiments. The isolate was tentatively identified as Tetrapisispora sp.

Ultralarge Flakes of TiCT MXene Soft Delamination.

Two-dimensional (2D) titanium carbide MXene (TiCT) has attracted significant attention due to its combination of properties and great promise for various applications. The size of the 2D sheets is a critical parameter affecting multiple properties of assembled films, fibers and 3D structures. The increased lateral size of MXene flakes can benefit not only their assemblies by improving the interflake contacts and alignment but also fundamental studies at the individual flake level, allowing for facile patterning and investigation of intrinsic physical properties of MXenes.

Negative photoresponse in TiCT MXene monolayers.

Two-dimensional transition metal carbides, nitrides, and carbonitrides, collectively known as MXenes, are finding numerous applications in many different areas, including optoelectronics and photonics, but there is limited information about their intrinsic photoresponse. In this study, we investigated the visible and near-infrared range photoresponse of TiCT , the most popular MXene material to date. The electrical measurements were performed on devices based on individual monolayer TiCT MXene flakes, which were characterized by a variety of microscopic and spectroscopic methods.

Analysis of Cytogenetic Abnormalities in Iranian Patients with Syndromic Autism Spectrum Disorder: A Case Series.

Objective: Autism spectrum disorder (ASD) is a heterogeneous neuropsychiatric group of pervasive developmental disorders mainly diagnosed through the complex behavioral phenotype. According to strong genetic involvement, detecting the chromosome regions and the key genes linked to autism can help to elucidate its etiology. The present study aimed to investigate the value of cytogenetic analysis in syndromic autism and find an association between autism and chromosome abnormalities.

An amino-functionalized mesoporous silica (KIT-6) as a sorbent for dispersive and ultrasonication-assisted micro solid phase extraction of hippuric acid and methylhippuric acid, two biomarkers for toluene and xylene exposure.

The authors described a new application of amino-functionalized KIT-6 for dispersive ultrasonication-assisted micro solid phase extraction of hippuric acid (HA) and methyl hippuric acid (MHA) from human urine and water samples. In the first step, an amino-functionalized mesoporous silica of type KIT-6 was synthesized. It was characterized by field emission scanning electron microscopy, Fourier transform infrared spectrometry, nitrogen adsorption-desorption analysis, thermogravimetry and X-ray diffraction.

The use of tetragonal star-like polyaniline nanostructures for efficient solid phase extraction and trace detection of Pb(II) and Cu(II) in agricultural products, sea foods, and water samples.

Due to importance of trace analysis of lead and copper ions because of their toxicity, in this paper, for the first time a unique tetragonal star-like morphology of polyaniline was applied as a efficient solid phase for selective trace separation of copper and lead at optimum experimental conditions in shrimp, fish and water samples. Due to the unique star like nanostructure of synthesized sorbent, the tendency of the sorbent toward selective extraction of lead and copper ion in the optimised pH is very interesting. The prepared polymeric resin displayed good figures of merits with analytical calibration curve ranging from 1 to 120 μg L(-1) for copper and 2 to 100 μg L(-1) for lead ions with limits of detection of 0.

Application of a magnetic molecularly imprinted polymer for the selective extraction and trace detection of lamotrigine in urine and plasma samples.

Magnetic molecularly imprinted polymers have been synthesized for the selective preconcentration and trace determination of lamotrigine (LTG) in urine and plasma samples. The magnetic nanoparticles were modified by tetraethyl orthosilicate and 3-methacryloxypropyl trimethoxysilane before imprinting. The magnetic molecularly imprinted polymers were prepared via surface molecular imprinting technique, using Fe3 O4 as a magnetic component, LTG as template molecule, methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a cross-linker, and 2,2'-azobisisobutyronitrile as a radical initiator in methanol/acetonitrile (50:50, v/v) as the porogen.

Coupling of solvent-based de-emulsification dispersive liquid-liquid microextraction with high performance liquid chromatography for simultaneous simple and rapid trace monitoring of 2,4-dichlorophenoxyacetic acid and 2-methyl-4-chlorophenoxyacetic acid.

A simple, rapid, and efficient sample pretreatment technique, based on solvent-based de-emulsification dispersive liquid-liquid microextraction (SD-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for simultaneous preconcentration and trace detection of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) in water and urine samples. Some parameters such as acidity of solution, the amount of salt, type, and volume of extraction solvents, type of disperser/de-emulsifier solvent, and its volume were investigated and optimized. Under optimum extraction conditions, the limits of detections (LODs) of this method for MCPA and 2,4-D were 0.

Application of surfactant assisted dispersive liquid-liquid microextraction as an efficient sample treatment technique for preconcentration and trace detection of zonisamide and carbamazepine in urine and plasma samples.

A simple, rapid, and efficient method, based on surfactant assisted dispersive liquid-liquid microextraction (SA-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for simultaneous preconcentration and trace detection of zonisamide and carbamazepine in biological samples. A conventional cationic surfactant called cethyltrimethyl ammonium bromide (CTAB) was used as a disperser agent in the proposed approach. 1.