Fabrication and evaluation of a sensitive electrochemical sensor based on double hydroxide in nickel-aluminum nanolayers for the quantification of pyrocatechol.

Pyrocatechol, also known as catechol, is a commonly used compound in various industries; however, it can be toxic when used in high concentrations. Therefore, developing a highly sensitive electrochemical sensor for detecting pyrocatechol is important. Our study utilized a co-precipitation technique to fabricate a nanostructured nickel aluminum layered double hydroxide (Ni-Al-LDH).

Natural and anthropogenic origin of metallic contamination and health risk assessment: A hydro-geochemical study of Sehwan Sharif, Pakistan.

Heavy metal contamination in groundwater is a serious threat to the environment and therefore its proper monitoring is a matter of great concern these days. In the present research, groundwater samples from Sehwan Sharif district Jamshoro, Pakistan were collected to estimate the concentration of various elements including potentially hazardous metals. Statistical analysis of the collected data based on Pearson co-relation metal clustering and Principal Component Analysis (PCA) divides the elements into three groups; Group I contains As, Cu, Ni, and Cd, Group II contains Mn, Fe, B, and Cr and Group III contains Pb and Zn.

Equilibrium, kinetics and thermodynamic studies for the removal of arsenic from water using newly synthesized amino resin supported hydrous ferric oxide nano composite.

Arsenic (III) was treated by newly synthesized ferric oxide nano composite supported on amino resin (NXHFO). Amberlite XAD-4 was converted to amino derivative (NX) and HFO particles were prepared on its surface. Batch study was conducted to study the removal of arsenic from aqueous media.

Estimates of future cancer mortality attributable to modifiable risk factors in Canada.

Objectives: Modifiable lifestyle, environmental, and infectious risk factors associated with cancer impact both cancer incidence and mortality at the population level. Most studies estimating this burden focus on cancer incidence. However, because these risk factors are associated with cancers of disparate mortality rates, the burden associated with cancer incidence could differ from cancer mortality.

Estimating the future cancer management costs attributable to modifiable risk factors in Canada.

Objectives: An estimated 33-37% of incident cancers in Canada are attributable to modifiable risk factors. Interventions targeting these risk factors would minimize the substantial health and economic burdens Canadians face due to cancer. We estimate the future health and economic burden of cancer in Canada by incorporating data from the Canadian Population Attributable Risk of Cancer (ComPARe) study into OncoSim, a web-based microsimulation tool.

Nonenzymatic Electrochemical Detection of 2,4,6-Trichlorophenol Using CuO/Nafion/GCE: A Practical Sensor for Environmental Toxicants.

2,4,6-Trichlorophenol (2,4,6 TCP) is one of the hazardous toxicants, which has severe impacts on the environment and human health. This study is designed to develop a highly sensitive and selective electrochemical sensor based on CuO nanostructures for the detection of 2,4,6 TCP. The CuO nanostructures were synthesized through an aqueous chemical growth method and characterized by versatile analytical techniques, for example, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, atomic force microscopy, energy-dispersive spectrometry, and X-ray diffraction.

Environmental Friendly Synthetic Modification of Amberlite XAD-2 Resin for the Removal of Highly Toxic Hexavalent Chromium from Water.

Amberlite XAD-2 functionalized by coupling through -C=N- spacer with isatin via an environmental friendly protocol. The modified resin was used for the evaluation of its sorption capacity towards toxic Cr (VI) ions using spectrophotometer. pH, volume, sorbent amount, initial concentration of Cr(VI) ions, and agitation time were optimized.

Clinical impact and cost-effectiveness of integrating smoking cessation into lung cancer screening: a microsimulation model.

Background: Low-dose computed tomography (CT) screening can reduce lung cancer mortality in people at high risk; adding a smoking cessation intervention to screening could further improve screening program outcomes. This study aimed to assess the impact of adding a smoking cessation intervention to lung cancer screening on clinical outcomes, costs and cost-effectiveness.

Methods: Using the OncoSim-Lung mathematical microsimulation model, we compared the projected lifetime impact of a smoking cessation intervention (nicotine replacement therapy, varenicline and 12 wk of counselling) in the context of annual low-dose CT screening for lung cancer in people at high risk to lung cancer screening without a cessation intervention in Canada.

Equilibrium, kinetic and thermodynamic studies of removal of phenol from aqueous solution using surface engineered chemistry.

Iron impregnated activated carbon has been used as a new adsorbent for the adsorptive removal of phenol from waste water. Impregnation of iron was confirmed by Fourier transform infrared spectroscopy and scanning electron microscope and energy dispersive spectroscopy. Different parameters affecting the adsorption capacity of Iron impregnated activated carbon such as Iron impregnated activated carbon dosage, contact time, pH of solution, initial concentration of phenol and agitation speed were optimized.

Correction to: Evaluation of hydrochar efficiency for simultaneous removal of diclofenac and ibuprofen from aqueous system using surface response methodology.

The original publication of this paper contain typographical mistakes.

Evaluation of hydrochar efficiency for simultaneous removal of diclofenac and ibuprofen from aqueous system using surface response methodology.

Pharmaceutically active compounds like diclofenac (DFS), ibuprofen (IBP), and other drugs that persist in the environment are listed as emerging contaminants. These escape from normal wastewater treatment plants and find their way to water streams; therefore, alternate treatment processes are needed. Herein, a sorbent material is reported that is prepared through hydrotermal carbonization from dried fruit powder of Zizipus mauritiana L.

Quantitative separation of hesperidin, chrysin, epicatechin, epigallocatechin gallate, and morin using ionic liquid as a buffer additive in capillary electrophoresis.

Recently, an increasing interest has been observed in ionic liquids (ILs) due to their potentialities in various chemical processes. ILs have some unique properties making them excellent additives in CE. In this work a simple, rapid, and reliable CZE method has been developed and validated using 1-butyl-3-methyl imidazolium hexafluorophosphate (BMIM-PF ) ionic liquid as a buffer additive for the determination/separation of five flavonoids including hesperedin, epicatechin (EC), epigallocatechin gallate (EGCG), and morin using photodiode array (PDA) detector.

Biennial lung cancer screening in Canada with smoking cessation-outcomes and cost-effectiveness.

Background: Guidelines recommend low-dose CT (LDCT) screening to detect lung cancer among eligible at-risk individuals. We used the OncoSim model (formerly Cancer Risk Management Model) to compare outcomes and costs between annual and biennial LDCT screening.

Methods: OncoSim incorporates vital statistics, cancer registry data, health survey and utility data, cost, and other data, and simulates individual lives, aggregating outcomes over millions of individuals.

Cost-effectiveness of Lung Cancer Screening in Canada.

Importance: The US National Lung Screening Trial supports screening for lung cancer among smokers using low-dose computed tomographic (LDCT) scans. The cost-effectiveness of screening in a publically funded health care system remains a concern.

Objective: To assess the cost-effectiveness of LDCT scan screening for lung cancer within the Canadian health care system.

Spectrofluorimetric analysis of famotidine in pharmaceutical preparations and biological fluids by derivatization with benzoin.

A sensitive and simple spectrofluorimetric method has been developed for the analysis of famotidine, from pharmaceutical preparations and biological fluids after derivatization with benzoin. The reaction was carried out in alkaline medium with measurement of fluorescence intensity at 446 nm with excitation wavelength at 286 nm. Linear calibration was obtained with 0.

LC/UV determination of cefradine, cefuroxime, and cefotaxime in dairy milk, human serum and wastewater samples.

Cephalosporins type antibiotics are widely used to treat infectious diseases. Their determination is not only important in blood/serum of patients under treatment but also in diverse matrices like wastewaters, milk etc. as contaminant.

Single-channel flow injection spectrophotometric determination of nickel using furildioxime in micellar solution.

A very simple, selective, and fast flow injection spectrophotometeric method is developed for determination of nickel using furildioxime as complexing agent. Micellar solution of brij-35 is employed to solubilize the sparingly soluble complex of Ni-furildioxime in buffered aqueous system (pH-9.00).

A novel micellar electrokinetic chromatographic method for separation of metal-DDTC complexes.

Micellar electrokinetic chromatography (MEKC) was examined for the separation and determination of Mo(VI), Cr(VI), Ni(II), Pd(II), and Co(III) as diethyl dithiocarbamate (DDTC) chelates. The separation was achieved from fused silica capillary (52 cm × 75 μm id) with effective length 40 cm, background electrolyte (BGE) borate buffer pH 9.1 (25 mM), CTAB 30% (100 mM), and 1% butanol in methanol (70 : 30 : 5 v/v/v) with applied voltage of -10 kV using reverse polarity.

Teaching aseptic technique for central venous access under ultrasound guidance: a randomized trial comparing didactic training alone to didactic plus simulation-based training.

Background: Our goal was to determine whether simulation combined with didactic training improves sterile technique during ultrasound (US)-guided central venous catheter (CVC) insertion compared with didactic training alone among novices. We hypothesized that novices who receive combined didactic and simulation-based training would perform similarly to experienced residents in aseptic technique, knowledge, and perception of comfort during US-guided CVC insertion on a simulator.

Methods: Seventy-two subjects were enrolled in a randomized, controlled trial of an educational intervention.

Development and implication of a capillary electrophoresis methodology for ciprofloxacin, paracetamol and diclofenac sodium in pharmaceutical formulations and simultaneously in human urine samples.

This work studies the development of a simple and fairly rapid methodology for simultaneous determination/separation of three frequently co-administered drugs; ciprofloxacin (CIP), paracetamol (PCT) and diclofenac sodium (DIC) using capillary electrophoresis (CE) with UV detection at 260 nm. Separation was achieved in only 6.5 min with a simple buffer of sodium tetraborate (50 mM) at pH 9.

The status of water and sanitation among Pacific Rim nations.

Analysis of relationships among national wealth, access to improved water supply and sanitation facilities, and population health indices suggests that the adequacy of water resources at the national level is a poor predictor of economic development--namely, that low water stress is neither necessary nor sufficient for economic development at the present state of water stress among Pacific Rim nations. Although nations differ dramatically in terms of priority provided to improved water and sanitation, there is some level of wealth (per capita GNP) at which all nations promote the development of essential environmental services. Among the Pacific Rim countries for which there are data, no nation with a per capita GNP > US$18,000 per year has failed to provide near universal access to improved water supply and sanitation.

A capillary zone electrophoretic method for simultaneous determination of seven drugs in pharmaceuticals and in human urine.

A simple, sensitive, and novel method has been developed and validated for the separation and simultaneous quantitation of seven structurally different drugs-pipemidic acid and ofloxacin quinolone antibiotics, pseudoephedrine decongestant, piroxicam anti-inflammatory, thiamin, pyridoxine, and cobalamin-in a mixture by capillary zone electrophoresis. Factors affecting the separation were pH, concentration of buffer, and applied voltage. Separation was carried out in < 9 min with a 50 mM sodium tetraborate buffer, pH 10, and an applied voltage of 30 kV in an uncoated silica capillary tube.

Quantitative separation of oxytocin, norfloxacin and diclofenac sodium in milk samples using capillary electrophoresis.

A simple, sensitive and rapid method has been developed for simultaneous separation and quantification of three different drugs: oxytocin (OT), norfloxacin (NOR) and diclofenac (DIC) sodium in milk samples using capillary electrophoresis (CE) with UV detection at 220 nm. Factors affecting the separation were pH, concentration of buffer and applied voltage. Separation was obtained in less than 9 min with sodium tetraborate buffer of pH 10.

Banana peel: a green and economical sorbent for the selective removal of Cr(VI) from industrial wastewater.

This study describes the use of banana peel, a commonly produced fruit waste, for the removal of Cr(VI) from industrial wastewater. The parameters pH, contact time, initial metal ion concentration, and temperature were investigated and the conditions resulting in rapid and efficient adsorption (95% within 10 min) were determined. The binding of metal ions was found to be pH dependent with the optimal sorption occurring at pH 2.

Characterization of banana peel by scanning electron microscopy and FT-IR spectroscopy and its use for cadmium removal.

This study describes the use of banana peel, a commonly produced fruit waste, for the removal of Cd(II) from environmental and industrial wastewater. The banana peel was characterized by FT-IR and scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) analysis. The parameters pH, contact time, initial metal ion concentration and temperature were investigated and found to be rapid ( approximately 97% within 10 min).