Fabrication of samarium doped MOF-808 as an efficient photocatalyst for the removal of the drug cefaclor from water.

MOFs are emerging photocatalysts designed by tuning organic ligands and metal centers for optimal efficiency. In this study, a samarium decorated MOF-808(Ce) metal organic framework was fabricated by facile hydrothermal synthesis. The synthesized samarium decorated MOF-808(Ce) was characterized by using analytical techniques such as SEM, EDX, XRD and TGA to study its morphological, thermal and structural properties.

Fabrication and characterization of g-CN supported Cu-single atom catalysts for the photocatalytic degradation of dyes.

Methylene blue and Congo red are widely used organic dyes in biomedical laboratories and textile industries. The abundant use of these dyes has led to their emission in wastewaters, which causes major health hazards to exposed populations. Therefore, it is necessary to properly treat the dye effluents before being discharged into the water bodies.

Photocatalytic degradation of imidacloprid using AgO/CuO composites.

Imidacloprid is one of the most commonly used neonicotinoid pesticides that has been identified as a neurotoxin for various non-target organisms. It binds to the central nervous system of organisms, causing paralysis and eventually death. Thus, it is imperative to treat waterwaters contaminated with imidacloprid using an efficient and cost effective method.

Development of highly permselective Mixed Matrix Membranes comprising of polyimide and Ln-MOF for CO capture.

Mixed Matrix Membranes (MMMs) with hybrid organic-inorganic characteristics offer a strong alternative to traditional polymer-based membranes to reduce the trade-off between gas permeability and selectivity. This work incorporated lanthanum-Metal Organic Frameworks in the Matrimid to fabricate MMMs. To understand the effects of nano-filler on membranes' morphology, porosity, thermal stability, and chemical composition, MMMs were fabricated with three different loadings of nano-filler, i.

Reversible Diels-Alder and Michael Addition Reactions Enable the Facile Postsynthetic Modification of Metal-Organic Frameworks.

Functionalization of metal-organic frameworks (MOFs) is critical in exploring their structural and chemical diversity for numerous potential applications. Herein, we report multiple approaches for the tandem postsynthetic modification (PSM) of various MOFs derived from Zr(IV), Al(III), and Zn(II). Our current work is based on our efforts to develop a wide range of MOF platforms with a dynamic functional nature that can be chemically switched via thermally triggered reversible Diels-Alder (DA) and hetero-Diels-Alder (HDA) ligations.

Zn and Cd assisted photo-catalytic degradation of chlorpyrifos in soil.

The Cd and Zn assisted photo-catalytic degradation of soil incorporated chlorpyrifos (CLP) was reported in current study. The soil samples fortified with CLP and metals were irradiated in photo-reactor for different time intervals to check maximum degradation. Soil samples extracted with acetonitrile were analyzed by HPLC.

Photocatalytic degradation of imidacloprid by Ag-ZnO composite.

The present study focused on exploring the potential of Ag-ZnO composites for complete mineralization of imidacloprid with the aim to sustain the pollutant free safe water supply. The composites were prepared by hydrothermal method and characterized by Scanning electron microscope (SEM), Energy dispersive X-ray crystallography (EDX), X-ray diffraction (XRD) and band gap measurements. These composites were used to study the UV irradiated degradation of imidacloprid while optimizing the process parameters such as time of UV irradiation, pH of medium, pesticide concentration and composite loading.

Reductive transformation of profenofos with nanoscale Fe/Ni particles.

Profenofos is an abundantly used organophosphate pesticide in agriculture but its excessive use may lead to hazardous effects on environment. Thus, the present study focused on the reductive transformation of this pesticide in the presence of Fe/Ni bimetallic nanoparticles by optimizing the process parameters such as stirring time, nanoparticles dose, pH, and initial pesticide concentration. The results of reductive transformation were compared with photodegradation studies.

Photodegradation of bifenthrin and deltamethrin-effect of copper amendment and solvent system.

The photodegradation of bifenthrin and deltamethrin was studied in the presence of Cu salts and two different solvents, methanol and acetonitrile. Results of the study showed that in the absence of any metal salt, the two pesticides degraded more rapidly in acetonitrile than in methanol. After 24 h of UV irradiation, 70% of deltamethrin had degraded in acetonitrile, while only 41% bifenthrin degraded in this solvent.

Monitoring and distribution patterns of pesticide residues in soil from cotton/wheat fields of Pakistan.

The excessive use of hazardous pesticides for massive cotton and wheat production has deteriorated the quality of Okara district's soil. Thus, in order to sustain the production of good-quality food, it is essential to determine the residue levels of pesticides in the agricultural soil and define their possible sources. Thus, the present study focused on the determination of selected pesticides in the soil samples obtained from cotton/wheat fields by using the modified multi-residue pesticide analysis method based on GCMS and HPLC-UV.

Distribution and source apportionment studies of heavy metals in soil of cotton/wheat fields.

Heavy metals enriched agricultural soils have been the subject of great concern because these metals have potential to be transferred to the soil solution and afterward accumulated in food chain. To study the trace metal persistence in crop soil, 90 representative soil samples were collected and analyzed for heavy metal (As, Cd, Cu, Fe, Mn, Ni, Pb, and Zn) and anions (chloride, nitrates, phosphates and sulfates). Cluster and factor analysis techniques were used for the source identification of these excessive heavy metal levels and ecological risk was determined with potential ecological risk assessment.

Distribution of Heavy Metals in the Soils Associated with the Commonly Used Pesticides in Cotton Fields.

Agricultural soils contain both heavy metals and pesticides originating from various agricultural practices. It is quite important to study the relationships between these two classes of compounds. To accomplish this, 52 soil samples were collected from cotton fields and analyzed for their metal contents (Ni, Cu, Co, Pb, Cr, and Cd) and levels of most commonly used pesticides (imidacloprid, acetamiprid, and emamectin).

Cu(2+) and Fe(2+) mediated photodegradation studies of soil-incorporated chlorpyrifos.

The influences of Cu(2+) and Fe(2+) on the photodegradation of soil-incorporated chlorpyrifos were investigated in the present study. The soil samples spiked with chlorpyrifos and selected metal ions were irradiated with UV light for different intervals of time and analyzed by HPLC. The unsterile and sterile control soil samples amended with pesticides and selected metals were incubated in the dark at 25 °C for the same time intervals.

Photodegradation of α-cypermethrin in soil in the presence of trace metals (Cu2+, Cd2+, Fe2+ and Zn2+).

The influence of trace metals (Cu(2+), Zn(2+), Cd(2+) and Fe(2+)) on the photodegradation of α-cypermethrin (α-CYM) in agricultural soil was studied. The soil samples were spiked with α-cypermethrin with/without the presence of metal ions, irradiated under a UV irradiation chamber for a regular period of time and analyzed by using HPLC. The dark control sterile and unsterile soil samples spiked with α-cypermethrin and selected trace metals were incubated for the same interval of time at 25 °C.

Design and fabrication of branched polyamine functionalized mesoporous silica: an efficient absorbent for water remediation.

A novel branched polyamine (polyethyleneimine, PEI) functionalized mesoporous silica (MS) adsorbent is developed via a facile "grafting-to" approach. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy verified the effective surface functionalization of MS with monolayer and polymer. The transmission electron microscopy (TEM) was employed to reveal the morphology of the fabricated materials.

Speciative distribution and bioavailability of metals in agricultural soils receiving industrial wastewater.

In order to assess the metal pollution status of agricultural lands of Mandi Bahauuddin receiving industrial wastewater, 35 top soil samples were investigated for the determination of selected metal levels, i.e., Fe, Cu, Cd, Cr, Ca, Ni, and Pb by flame atomic absorption spectroscopy under optimum analytical conditions.

Age- and gender-based studies of trace metal levels and various enzymes associated with myocardial infarction.

The present investigation deals with the determination of various serum enzymes known to be elevated during myocardial infarction (MI) and estimation of selected metals like Cu, Cr, Co, Fe, Pb, and Mg by flame atomic absorption spectrophotometry. The data obtained thereby were processed for the determination of correlation coefficient matrix among the cardiac enzymes and the serum metals. The study evidenced the accumulation of Pb during MI and reduction in the level of Fe.

Distribution, correlation, and source apportionment of selected metals in tannery effluents, related soils, and groundwater--a case study from Multan, Pakistan.

In order to study the distribution, correlation, and apportionment of selected metals, the tannery effluent, related soil, and groundwater samples were collected from Multan, Pakistan, and analyzed on flame atomic absorption spectrophotometer. Among the selected metals, Na, Ca, K, Cr, and Mg revealed dominant concentrations with average values of 5,499, 945, 565, 209, and 107 mg/L and 2,634, 330, 484, 14.1, and 60.

Comparative statistical analysis of chrome and vegetable tanning effluents and their effects on related soil.

Two tanning units of Pakistan, namely, Kasur and Mian Channun were investigated with respect to the tanning processes (chrome and vegetable, respectively) and the effects of the tanning agents on the quality of soil in vicinity of tanneries were evaluated. The effluent and soil samples from 16 tanneries each of Kasur and Mian Channun were collected. The levels of selected metals (Na, K, Ca, Mg, Fe, Cr, Mn, Co, Cd, Ni, Pb and Zn) were determined by using flame atomic absorption spectrophotometer under optimum analytical conditions.

Statistical source identification of metals in groundwater exposed to industrial contamination.

Levels of selected metals Na, Ca, Mg, K, Fe, Mn, Cr, Co, Ni, Cd, Pb and Mn were estimated by flame atomic absorption spectrophotometry in groundwater samples from Kasur, a significant industrial city of Pakistan. Salient mean concentration levels were recorded for: Na (211 mg/l), Ca (187 mg/l), Mg (122 mg/l), K (87.7 mg/l), Fe (2.

Multivariate analysis of the selected metals in the hair of cerebral palsy patients versus controls.

Seventeen metals were measured in scalp hair samples from cerebral palsy patients (CPPs) and controls. Samples were collected from 95 CPPs and 93 controls. The nitric acid-perchloric acid wet digestion procedure was used for quantification of the selected metals by flame atomic absorption spectrophotometry.

Multivariate analysis of trace metal levels in tannery effluents in relation to soil and water: a case study from Peshawar, Pakistan.

Tannery effluents and relevant ground water and soil samples collected from various tanning industries of Peshawar were analyzed for Na, Ca, K, Mg, Fe, Mn, Cr, Co, Cd, Ni, Pb and Zn by the AAS method. The metal concentration data for the three media are reported in terms of basic statistical parameters, metal-to-metal correlations and linear regression analyses. Metal distributions in the three media were quite divergent and showed non-normal distributions with high standard deviation and skewness parameters.

Spatial variations in selected metal contents and particle size distribution in an urban and rural atmosphere of Islamabad, Pakistan.

Spatial variations in total suspended particulate matter (TSP) were investigated for distribution of metals and particle size fractions in the urban and rural atmosphere of Islamabad, Pakistan. The metals Na, K, Fe, Mn, Pb, Cd, Cr, Zn, Ni and Co, and the particle fractions <2.5, 2.

Multivariate analysis of selected metals in tannery effluents and related soil.

Effluent and relevant soil samples from 38 tanning units housed in Kasur, Pakistan, were obtained for metal analysis by flame atomic absorption spectrophotometric method. The levels of 12 metals, Na, Ca, K, Mg, Fe, Mn, Cr, Co, Cd, Ni, Pb and Zn were determined in the two media. The data were evaluated towards metal distribution and metal-to-metal correlations.

A comparative study based on gender and age dependence of selected metals in scalp hair.

Levels of 10 metals (Ca, Mg, Fe, Zn, Cu, Mn, Cd, Co, Cr and Ni) in the scalp hair of male and female donors, with age groups between 3 and 100 years, were determined by ICP-AES. In total, 58 male and 30 female hair samples were analyzed in triplicate. The donors belonged to the rural area of district Chakwal, a well-known typical non-urban site in Pakistan.