Large-Area Nonfullerene Organic Photovoltaic Modules with a High Certified Power Conversion Efficiency.

Achieving large-area organic photovoltaic (OPV) modules with reasonable cost and performance is an important step toward commercialization. In this work, solution-processed conventional and inverted OPV modules with an area of 216 cm were fabricated by the blade coating method. Film uniformity was controlled by adjusting the fabrication parameters of the blade coating procedure.

Facile Fabrication of a Bio-Inspired Leaf Vein-Based Ultra-Sensitive Humidity Sensor with a Hygroscopic Polymer.

Bio-inspired materials have received significant interest in the development of flexible electronics due to their natural grid structures, especially natural leaf vein networks. In this work, a bio-inspired leaf vein-based flexible humidity sensor is demonstrated. The proposed sensor is composed of a leaf/Al/glycerin/Ag paste.

Solution-Processed Chloroaluminum Phthalocyanine (ClAlPc) Ammonia Gas Sensor with Vertical Organic Porous Diodes.

In this research work, the gas sensing properties of halogenated chloroaluminum phthalocyanine (ClAlPc) thin films were studied at room temperature. We fabricated an air-stable ClAlPc gas sensor based on a vertical organic diode (VOD) with a porous top electrode by the solution process method. The surface morphology of the solution-processed ClAlPc thin film was examined by field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM).

Lead-free cesium tin halide nanocrystals for light-emitting diodes and color down conversion.

Organometal halide perovskites are attracting a great deal of attention because of their long carrier diffusion lengths, wide wavelength tunability, and narrow-band emission. However, the toxicity of lead has caused considerable environmental and health concerns. In this work, lead-free cesium tin halide nanocrystals are synthesized and investigated.

A Cylindrical Ion Sensor Tip with a Diameter of 1.5 mm for Potentially Invasive Medical Application.

A fine cylindrical chemical sensor tip is developed with optical fiber in the core, surrounded by a transparent cylinder of photopolymer Norland Optical Adhesive 61 (NOA 61), and covered by a polymer hydrogel mixed with sensing molecules. The overall diameter is as small as 1.5 mm.

The influence of the interfacial layer on the stability of all-solution-processed organic light-emitting diodes.

Improving the stability of large-area organic light-emitting diodes is very important for practical applications. The interfacial layer plays a crucial role to improve the electron injection characteristic. In this work, devices prepared by various solution-processed interfacial materials and thermal-evaporated CsF were compared.

All-Solution-Processed Red and Orange-Red Organic Light-Emitting Diodes with High-Efficiencies: The Effect of Mixed-Host Emissive Layers and Thermal Annealing Treatment.

The instability of the organic light-emitting diodes (OLEDs) during operation can be attributed to the existence of point defects on the organic layers. In this work, the effect of mixed-host emissive layer and the thermal annealing treatment were investigated to eliminate defects and to boost the device performance. The mixed-host system includes 4,4',4''-tri (9-carbazoyl) triphenylamine (TCTA) and 2,7-bis(diphenylphosphoryl)-9, 9'-spirobi[fluorene] (SPPO13).

Ultrastable, Deformable, and Stretchable Luminescent Organic-Inorganic Perovskite Nanocrystal-Polymer Composites for 3D Printing and White Light-Emitting Diodes.

Organic-inorganic perovskite nanocrystals with excellent optoelectronic properties have been utilized in various applications, despite their stability issues. The perovskite materials are sensitive to environments such as polar solvents, moisture, and heat. Thus, they are not used for extrusion three-dimensional (3D) printing, as it is usually conducted in the ambient environment and requires heating to liquefy the printed materials.

Leakage-free solution-processed organic light-emitting diode using a ternary host with single-diode emission area up to 6 × 11.5 cm.

The electrical current leakage and stability are studied for solution-processed OLEDs with areas of 4.45 mm, 3 × 3.2 cm, and 6 × 11.

Thermally Stable High-Performance Polymer Solar Cells Enabled by Interfacial Engineering.

Interfacial engineering plays an important role in determining the performance and stability of polymer solar cells (PSCs). In this study, thermally stable highly efficient PSCs are fabricated by incorporating a solution-processed cathode interfacial layer (CIL), including 4,4'-({[methyl(4-sulfonatobutyl)ammonio]bis(propane-3,1-diyl)}bis(dimethylammoniumdiyl))bis(butane-1-sulfonate) (MSAPBS) and polyethylenimine (PEI). For PSCs based on blends of poly{4,8-bis[5-(2-ethylhexyl)thiophen-2-yl]benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-[4-(2-ethylhexyl)-3fluorothieno[3,4-b]thiophene-2-carboxylate-2,6-diyl]} (PBDTTT-EFT) and [6,6]-phenyl C -butyric acid methyl ester (PC BM), the maximum power conversion efficiency (PCE) of inverted PSCs reaches 8.

Toward Long-Term Stable and Efficient Large-Area Organic Solar Cells.

Here, we report that long-term stable and efficient organic solar cells (OSCs) can be obtained through the following strategies: i) combination of rapid-drying blade-coating deposition with an appropriate thermal annealing treatment to obtain an optimized morphology of the active layer; ii) insertion of interfacial layers to optimize the interfacial properties. The resulting devices based on poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b']dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-2-carboxylate-2,6-diyl)] (PBDTTT-EFT):[6,6]-phenyl C butyric acid methyl ester (PC BM) blend as the active layer exhibits a power conversion efficiency (PCE) up to 9.57 %, which represents the highest efficiency ever reported for blade-coated OSCs.

Large-Area Nano-patterning and Fabrication of Vertical Transistor Array by Non-close-packed Polystyrene Spheres.

We demonstrated a large-area nanopatterning technique with the help of a non-close-packed PS sphere layer over a large-area substrate. The non-close-packed PS sphere layer is fabricated by blade coating method. It was demonstrated that non-close-packed PS spheres can be achieved within an area of 18 cm × 25 cm on a rigid glass substrate and within an area of 10 cm × 10 cm on a flexible substrate.

13% efficiency hybrid organic/silicon-nanowire heterojunction solar cell via interface engineering.

Interface carrier recombination currently hinders the performance of hybrid organic-silicon heterojunction solar cells for high-efficiency low-cost photovoltaics. Here, we introduce an intermediate 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) layer into hybrid heterojunction solar cells based on silicon nanowires (SiNWs) and conjugate polymer poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) (PEDOT:PSS). The highest power conversion efficiency reaches a record 13.

Photoluminescence of Si nanocrystallites and amorphous oxygen-containing si nanoparticles: the reversible effect of ambient atmosphere on luminescence.

Si nanocrystallites of various sizes and oxygen-containing Si nanoparticles with different oxygen contents were prepared by vapor condensation. The Si nanocrystallites showed a visible light emission from 500 nm to 900 nm with the peak at 800 nm, and the intensity of photoluminescence increased with decreasing the particle size. This photoluminescence observed in vacuum could be quenched by air and hydrogen, and reappeared after the sample chamber was evacuated.

Triplet-to-singlet exciton formation in poly(p-phenylene-vinylene) light-emitting diodes.

The triplet to singlet exciton formation ratio in a MEH-PPV light-emitting diode is measured by comparing the triplet-induced absorptions with optical and electric excitations at the same singlet exciton density. The ratio is a strong universal decreasing function of the averaged electric field. Using 4 ns for singlet to triplet intersystem crossing time, the ratio is significantly larger than the spin-independent value 3 at intermediate field but is reduced to about 2 for higher field.

Incidence of internal cancers and ingested inorganic arsenic: a seven-year follow-up study in Taiwan.

In order to elucidate the dose-response relationship between ingested inorganic arsenic and internal cancers, a total of 263 patients with blackfoot disease and 2293 healthy residents in the endemic area of arseniasis were recruited and followed up for 7 years. The information on consumption of high-arsenic artesian well water, sociodemographic characteristics, life-style and dietary habits, and personal and family history of cancers was obtained through standardized interviews. The occurrence of internal cancers among study subjects was determined through annual health examinations, home visit personal interviews, household registration data checks, and national death certification and cancer registry profile linkages.