Stabilization and Solidification of Beryllium Waste: Influence of the Cement Composition on the Corrosion of Be Metal.

Beryllium metal is used as neutron moderator and reflector or multiplier in certain types of fission or fusion reactors. Dismantling of these reactors will produce radioactive beryllium waste, classified as low- or intermediate-level waste, that will need to be stabilised and solidified before being sent to disposal. The cementation process is under consideration because it may offer a good compromise between simplicity of implementation, cost, and quality of the final cemented wasteform.

Corrosion Mitigation in Molten Salt Environments.

The aim of this paper is to present methods for corrosion mitigation in molten salt environments. The corrosion of structural materials depends directly on the redox potential of the salt. When the redox potential of the salt is higher than the standard potentials of the elements constituting the structural materials, corrosion occurs.

Electrochemical Behavior of Al/Mg Alloys Immobilized in a Magnesium Potassium Phosphate Cement-Based Mortar.

Portland cement is extensively used for the conditioning of radioactive waste. However, its high alkalinity is a serious obstacle to the stabilization of waste containing aluminum metal since aluminum is oxidized by the pore solution with the production of dihydrogen. This work investigates the potential of an alternative binder, magnesium potassium phosphate (MKP) cement, for the stabilization of Al-Mg alloys comprising 2 to 4.

Simultaneous Determination of Neutron-Induced Fission and Radiative Capture Cross Sections from Decay Probabilities Obtained with a Surrogate Reaction.

Reliable neutron-induced-reaction cross sections of unstable nuclei are essential for nuclear astrophysics and applications but their direct measurement is often impossible. The surrogate-reaction method is one of the most promising alternatives to access these cross sections. In this work, we successfully applied the surrogate-reaction method to infer for the first time both the neutron-induced fission and radiative capture cross sections of ^{239}Pu in a consistent manner from a single measurement.

Impact of harvest maturity on the aroma characteristics and chemistry of Cascade hops used for dry-hopping.

The impact of ripening on the dry-hop aroma potential and chemical development of Cascade hops is not well understood. Therefore, 5-6 weekly hop samples were collected over the 2014, 2015 and 2016 harvests. Concentrations of humulones did not change as a function of harvest date, while total hop essential oil content displayed significant positive trends.