Burst Strength of BIOLOXdelta Femoral Heads and Its Dependence on Low-Temperature Environmental Degradation.

Zirconia-toughened alumina (ZTA) currently represents the bioceramic gold standard for load-bearing components in artificial hip joints. ZTA is long known for its high flexural strength and fracture toughness, both properties arising from a microscopic crack-tip shielding mechanism due to the stress-induced tetragonal-to-monoclinic (t→m) polymorphic transformation of zirconia. However, there have been concerns over the years regarding the long-term structural performance of ZTA since the t→m transformation also spontaneously occurs at the material's surface under low-temperature environmental conditions with a concomitant degradation of mechanical properties.

Enhanced bioactivity of SiN through trench-patterning and back-filling with Bioglass®.

Using a simple and innovative sandblasting process, disks of monolithic biomedical silicon nitride (β-SiN) were texturized with a matrix of regular, discrete square trenches with a total depth in the range of hundreds of microns. The process consisted of sandblasting SiN substrates through a stainless-steel wire-mesh (150 or 200 μm) using abrasive silicon carbide powders (α-SiC, ∼40 μm) under 1,034 kPa (150 psi) of gas pressure. The depth of the porosities could be controlled varying both the treatment time and the distance from the surface.

The role of nitrogen off-stoichiometry in the osteogenic behavior of silicon nitride bioceramics.

The surface chemistry of silicon nitride plays an important role in stimulating osteoblasts to proliferate and produce bone tissue with improved efficiency. This property, which is advantageous in spinal fusion surgery has a chemical origin and is a direct consequence of the cleavage of covalent SN bonds in an aqueous environment. Building upon a wealth of published research on the stimulation of osteoblastic activity by silicon, the aim of this paper is to explore the role of nitrogen and, more specifically, the N/Si atomic ratio on the osteogenic response of SiN.

Bioglass functionalization of laser-patterned bioceramic surfaces and their enhanced bioactivity.

The surfaces of silicon nitride (-SiN) and zirconia toughened alumina (ZTA) were patterned using a high-energy laser source, which operated at a wavelength of 1064 nm. The patterning procedure yielded a series regular, cylindrical cavities 500 and 300 μm in diameter and depth, respectively. These cavities were subsequently filled with bioglass mixed with different fractions of SiN powder (0, 5, and 10 mol.

In vitro antibacterial activity of oxide and non-oxide bioceramics for arthroplastic devices: I. In situ time-lapse Raman spectroscopy.

Over the next two decades, a strong demographic demand for arthroplastic devices coupled with a decreased efficacy of antibiotics has been predicted to result in an exponential increase in the number of periprosthetic joint infections (PJIs). Advanced strategies are therefore required to improve the local peri-implant immune response and curb the pathogenic events of bacterial adhesion and biofilm formation. The use of biomaterials that autonomously counter infections is one approach to improve orthopedic outcomes.

Incorporating Si N into PEEK to Produce Antibacterial, Osteocondutive, and Radiolucent Spinal Implants.

Polyetheretherketone (PEEK) is a popular polymeric biomaterial which is primarily used as an intervertebral spacer in spinal fusion surgery; but it is developed for trauma, prosthodontics, maxillofacial, and cranial implants. It has the purported advantages of an elastic modulus which is similar to native bone and it can be easily formed into custom 3D shapes. Nevertheless, PEEK's disadvantages include its poor antibacterial resistance, lack of bioactivity, and radiographic transparency.

In vitro antibacterial activity of oxide and non-oxide bioceramics for arthroplastic devices: II. Fourier transform infrared spectroscopy.

The metabolic response of Gram-positive Staphylococcus epidermidis (S. epidermidis) bacteria to bioceramic substrates was probed by means of Fourier transform infrared spectroscopy (FTIR). Oxide zirconia-toughened alumina (ZTA) and non-oxide silicon nitride (Si3N4) substrates were tested.

Development of a SiYAlON glaze for improved osteoconductivity of implantable medical devices.

The application of bioactive coatings onto orthopaedic appliances is commonly performed to compensate for the otherwise bioinert nature of medical devices and to improve their osseointegration. Calcium phosphates, hydroxyapatite (HAp), and bioglasses are commercially available for this purpose. Until recently, few other inorganic compounds have been identified with similar biofunctionality.

Bioactive silicon nitride: A new therapeutic material for osteoarthropathy.

While the reciprocity between bioceramics and living cells is complex, it is principally governed by the implant's surface chemistry. Consequently, a deeper understanding of the chemical interactions of bioceramics with living tissue could ultimately lead to new therapeutic strategies. However, the physical and chemical principles that govern these interactions remain unclear.

Bacteriostatic behavior of surface modulated silicon nitride in comparison to polyetheretherketone and titanium.

Perioperative and latent infections are leading causes of revision surgery for orthopaedic devices resulting in significant increased patient care, comorbidities, and attendant costs. Identifying biomaterial surfaces that inherently resist biofilm adhesion and bacterial expression is an important emerging strategy in addressing implant-related infections. This in vitro study was designed to compare biofilm formation on three biomaterials commonly employed in spinal fusion surgery-silicon nitride (Si N ), polyetheretherketone (PEEK), and a titanium alloy (Ti6Al4V-ELI) -using one gram-positive and one gram-negative bacterial species.

Silicon Nitride Bioceramics Induce Chemically Driven Lysis in Porphyromonas gingivalis.

Organisms of Gram-negative phylum bacteroidetes, Porphyromonas gingivalis, underwent lysis on polished surfaces of silicon nitride (Si3N4) bioceramics. The antibacterial activity of Si3N4 was mainly the result of chemically driven principles. The lytic activity, although not osmotic in nature, was related to the peculiar pH-dependent surface chemistry of Si3N4.

Surface modulation of silicon nitride ceramics for orthopaedic applications.

Unlabelled: Silicon nitride (Si3N4) has a distinctive combination of material properties such as high strength and fracture toughness, inherent phase stability, scratch resistance, low wear, biocompatibility, hydrophilic behavior, excellent radiographic imaging and resistance to bacterial adhesion, all of which make it an attractive choice for orthopaedic implants. Unlike oxide ceramics, the surface chemistry and topography of Si3N4 can be engineered to address potential in vivo needs. Morphologically, it can be manufactured to have an ultra-smooth or highly fibrous surface structure.