Zwitterionic fibrous polypropylene assembled with amphiphatic carboxybetaine copolymers for hemocompatible blood filtration.

Unlabelled: The present study serves three main functions. First, it presents a novel random copolymer, made of octadecyl acrylate hydrophobic blocks and 2-(dimethylamino)ethyl methacrylate hydrophilic groups, and it zwitterionic form. Second, random copolymer and zwitterionic random copolymer, OmDn and Z-OmDn, are used to modify polypropylene membranes by evaporation coating.

The consideration of indolicidin modification to balance its hemocompatibility and delivery efficiency.

Indolicidin (IL) is an antimicrobial peptide (AMP), which has been utilized as a cell penetrating peptide (CPP) for drug delivery. However, the hemolysis restricts its clinical application. Therefore, we investigated the delivery efficiency and hemocompatibility of IL and its derivatives.

Toll-like receptor 6 and connective tissue growth factor are significantly upregulated in mitomycin-C-treated urothelial carcinoma cells under hydrostatic pressure stimulation.

Background: Urothelial carcinoma (UC) is the most common histologic subtype of bladder cancer. The administration of mitomycin C (MMC) into the bladder after transurethral resection of the bladder tumor (TURBT) is a common treatment strategy for preventing recurrence after surgery. We previously applied hydrostatic pressure combined with MMC in UC cells and found that hydrostatic pressure synergistically enhanced MMC-induced UC cell apoptosis through the Fas/FasL pathways.

Electrical stimulation to promote osteogenesis using conductive polypyrrole films.

In this study, we developed an electrical cell culture and monitoring device. Polypyrrole (PPy) films with different resistances were fabricated as conductive surfaces to investigate the effect of substrate-mediated electrical stimulation. The physical and chemical properties of the devices, as well as their biocompatibilities, were thoroughly evaluated.

Strategy of Fc-recognizable Peptide ligand design for oriented immobilization of antibody.

A new strategy for designing a short-chain peptide ligand with high affinity to the Fc region of an antibody was proposed. The targeted antibody is human prostate specific antibody (PSA) derived from Mouse IgG2a. The ligand design strategy involves two major parts: binding site selection and peptide ligand design.

Bacterial resistance control on mineral surfaces of hydroxyapatite and human teeth via surface charge-driven antifouling coatings.

This works reports a set of new functionalized polyethyleneimine (PEI) polymers, including a neutral PEGylated polymer PEI-g-PEGMA, a negatively charged polymer PEI-g-SA, and a zwitterionic polymer PEI-g-SBMA, and their use as antibiofouling coating agent for human teeth protection. Polymers were synthesized by Michael addition, XPS analysis revealed that each polymer could be efficiently coated onto hydroxyapatite, ceramic material used as a model tooth. Polymers carrying a negative net charge were more efficiently adsorbed, because of the establishment of electrostatic interactions with calcium ions.

The regulation of DNA adsorption and release through chitosan multilayers.

To sustain transgene expression, chitosan was studied to immobilize DNA using layer-by-layer assembly to form polyelectrolyte multilayers (PEMs). Higher DNA concentrations and longer deposition periods demonstrated more DNA adsorptions to PEMs. By adjusting pH and the molecular weight of chitosan, PEM structures were manipulated.

A novel application of indolicidin for gene delivery.

A bovine derived antimicrobial peptide, indolicidin (IL), was studied of its new application for gene transfer. Plasmid DNA was complexed with both IL and polyethylenimine (PEI) as ternary particles. Compared to DNA/IL complexes, the DNA/IL/PEI particles demonstrated high zeta potentials, small particle sizes, and superior loading efficiencies, suggesting the incorporation of polycations can support IL for gene delivery.

Interfacially polymerized layers for oxygen enrichment: a method to overcome Robeson's upper-bound limit.

Interfacial polymerization of four aqueous phase monomers, diethylenetriamine (DETA), m-phenylenediamine (mPD), melamine (Mela), and piperazine (PIP), and two organic phase monomers, trimethyl chloride (TMC) and cyanuric chloride (CC), produce a thin-film composite membrane of polymerized polyamide layer capable of O2/N2 separation. To achieve maximum efficiency in gas permeance and O2/N2 permselectivity, the concentrations of monomers, time of interfacial polymerization, number of reactive groups in monomers, and the structure of monomers need to be optimized. By controlling the aqueous/organic monomer ratio between 1.

Hydrostatic pressure enhances mitomycin C induced apoptosis in urothelial carcinoma cells.

Objectives: Urothelial carcinoma (UC) of the bladder is the second most common cancer of the genitourinary system. Clinical UC treatment usually involves transurethral resection of the bladder tumor followed by adjuvant intravesical immunotherapy or chemotherapy to prevent recurrence. Intravesical chemotherapy induces fewer side effects than immunotherapy but is less effective at preventing tumor recurrence.

Structural stability-chromatographic retention relationship on exenatide diastereomer separation.

In this study, the relationship of the structural stability of peptide diastereomers in elution solvents and their retention behaviors in reversed-phase chromatography (RPC) was examined to provide guidance on the solvent selection for a better separation of peptide diastereomers. We investigated the chromatographic retention behaviors of exenatide, a peptide drug for the treatment of type II diabetes mellitus and its three diastereomers using RPC and implicit molecular dynamics (MD) simulation analysis. Three diastereomers involved in the single serine residue mutation of D-form at the 11th, 32nd, and 39th residues were investigated in this study.

Use of biotinylated chitosan for substrate-mediated gene delivery.

To improve transfection efficiency of nonviral vectors, biotinylated chitosan was applied to complex with DNA in different N/P ratios. The morphologies and the sizes of formed nanoparticles were suitable for cell uptake. The biotinylation decreased the surface charges of nanoparticles and hence reduced the cytotoxicity.

Adsorption of antimicrobial indolicidin-derived peptides on hydrophobic surfaces.

The hydrophobic interaction between antimicrobial peptides and membrane hydrophobic cores is usually related to their cytotoxicity. In this study, the adsorption mechanism of five plasma membrane-associated peptides, indolicidin (IL) and its four derivatives, with hydrophobic ligands was investigated to understand the relationship between peptide hydrophobicity and bioactivity. The hydrophobic adsorption mechanisms of IL and its derivatives were interpreted thermodynamically and kinetically by reversed-phase chromatography (RPC) analysis and surface plasmon resonance (SPR) measurement, respectively.

Molecular dynamics simulation of the induced-fit binding process of DNA aptamer and L-argininamide.

Aptamers are rare functional nucleic acids with binding affinity to and specificity for target ligands. Recent experiments have lead to the proposal of an induced-fit binding mechanism for L-argininamide (Arm) and its binding aptamer. However, at the molecular level, this mechanism between the aptamer and its coupled ligand is still poorly understood.

Biofouling resistance of ultrafiltration membranes controlled by surface self-assembled coating with PEGylated copolymers.

Block and random PEGylated copolymers of poly(ethylene glycol) methacrylate (PEGMA) and polystyrene (PS) were synthesized with a controlled polydispersity using an atom transfer radical polymerization method and varying molar mass ratios of PS/PEGMA. Two types of PEGylated copolymers were self-assembly coated onto the surface of poly(vinylidene fluoride) (PVDF) ultrafiltration membranes for enhancing biofouling resistance. It was found that the adsorption capacities of random copolymers on PVDF membranes were all higher than those of block copolymers.

Hemocompatible mixed-charge copolymer brushes of pseudozwitterionic surfaces resistant to nonspecific plasma protein fouling.

In this work, the hemocompatibility of a sulfobetaine-like copolymer brush resulting from a mixed-charge copolymerization of the positively charged 11-mercapto-N,N,N-trimethylammonium chloride (TMA) and negatively charged 11-mercaptoundecylsulfonic acid (SA) was studied. Mixed charge distribution in the prepared poly(TMA-co-SA) copolymer brushes was controlled by the regulation of the reaction rate of the surface-initiated atom transfer radical polymerization (ATRP). The adsorption behavior of plasma proteins on a surface grafted with poly(TMA-co-SA) was measured by a surface plasmon resonance (SPR) sensor.

Dual-thermoresponsive phase behavior of blood compatible zwitterionic copolymers containing nonionic poly(N-isopropyl acrylamide).

Thermoresponsive statistical copolymers of zwitterionic sulfobetaine methacrylate (SBMA) and nonionic N-isopropylacrylamide (NIPAAm) were prepared with an average molecular weight of about 6.0 kDa via homogeneous free radical copolymerization. The aqueous solution properties of poly(SBMA-co-NIPAAm) were measured using a UV--visible spectrophotometer.

A systematic SPR study of human plasma protein adsorption behavior on the controlled surface packing of self-assembled poly(ethylene oxide) triblock copolymer surfaces.

A well-controlled biocompatible nonfouling surface is significant for biomedical requirements, especially for the improvement of biocompatibility. We demonstrate the low or nonbiofouling surfaces by coating hydrophobic-hydrophilic triblock copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) on the CH(3)-terminated self-assembled monolayer (SAM). Two types of copolymers are used to modify the surface, one with different PEO/PPO ratios ( approximately 20/80, 40/60, and 80/20, w/w) but the same PPO molecular weight ( approximately 2 k), the other with different copolymer MWs ( approximately 9, 11, and 15 k) but the same PEO/PPO ratio (80/20, w/w).

Preparation of a DNA aptamer-Pt complex and its use in the colorimetric sensing of thrombin and anti-thrombin antibodies.

DNA aptamers carrying Pt nanoparticles were prepared by the reaction of DNA aptamers (without functionalization with biotin, thiol, or other reactive groups) with K 2[PtCl 4] in solution at 60-90 degrees C. The DNA-Pt complexes possessed peroxidase enzymatic activity while retaining the specific binding ability of the aptamers. The enzymatic reaction of these complexes obeyed Michaelis-Menten kinetics.

A highly stable nonbiofouling surface with well-packed grafted zwitterionic polysulfobetaine for plasma protein repulsion.

An ideal nonbiofouling surface for biomedical applications requires both high-efficient antifouling characteristics in relation to biological components and long-term material stability from biological systems. In this study we demonstrate the performance and stability of an antifouling surface with grafted zwitterionic sulfobetaine methacrylate (SBMA). The SBMA was grafted from a bromide-covered gold surface via surface-initiated atom transfer radical polymerization to form well-packed polymer brushes.

Preservation of hematopoietic stem and progenitor cells from umbilical cord blood stored in a surface derivatized with polymer nanosegments.

Tissue culture flasks were prepared with immobilized amphiphilic nanosegments of Pluronic F68 and F127, polyethylene oxide (PEO)-polypropylene oxide (PPO)-PEO triblock copolymers, on their surfaces. These so-called "Pluronic-immobilized flasks" were used for the preservation of hematopoietic stem and progenitor cells from umbilical cord blood. The expression ratio of surface markers (CD34) on hematopoietic stem and progenitor cells stored in Pluronic-immobilized flasks was significantly higher than that in polystyrene tissue culture flasks or commercially available bioinert flasks (i.

Refolding of partially and fully denatured lysozymes.

Lysozyme refolding with high yields sometimes results from incomplete denaturation. Dithiothreitol (DTT) is a reductant commonly used to reduce and unfold disulfide-stabilized lysozymes. Through the use of fluorescence spectroscopy to access the extent of denaturation, we found that the rate and extent of denaturation highly depended on the concentration of DTT.

Hydrophobic contribution of amino acids in peptides measured by hydrophobic interaction chromatography.

The adsorption behaviors of amino acids in short chain peptides were examined. Each amino acid, aliphatic or charged, was inserted between the two tryptophans of a peptide, GWWG. The capacity factors of these peptides on an Ocytl-Sepharose column were measured.

Microcalorimetric studies of the mechanism of interaction between designed peptides and hydrophobic adsorbents.

To understand the mechanism of interaction between peptides and peptides with hydrophobic ligands, the oligomers (GWG, GWWG, GWWWG) were designed and synthesized to study adsorption behavior with octyl sepharose and CM-octyl sepharose. By batch equilibrium binding analysis and dilution heat of peptide solution measurement, the binding isotherm and adsorption enthalpy were obtained and the binding thermodynamics parameters were calculated and analyzed. In the isotherm analysis, we reveled that the affinity of GWG for both adsorbents is stronger than that of GWWG and GWWWG.