Preparation and characterization of graphene oxide paper.

Free-standing paper-like or foil-like materials are an integral part of our technological society. Their uses include protective layers, chemical filters, components of electrical batteries or supercapacitors, adhesive layers, electronic or optoelectronic components, and molecular storage. Inorganic 'paper-like' materials based on nanoscale components such as exfoliated vermiculite or mica platelets have been intensively studied and commercialized as protective coatings, high-temperature binders, dielectric barriers and gas-impermeable membranes.

Graphene-silica composite thin films as transparent conductors.

Transparent and electrically conductive composite silica films were fabricated on glass and hydrophilic SiOx/silicon substrates by incorporation of individual graphene oxide sheets into silica sols followed by spin-coating, chemical reduction, and thermal curing. The resulting films were characterized by SEM, AFM, TEM, low-angle X-ray reflectivity, XPS, UV-vis spectroscopy, and electrical conductivity measurements. The electrical conductivity of the films compared favorably to those of composite thin films of carbon nanotubes in silica.

An ultra-thin PDMS membrane as a bio/micro-nano interface: fabrication and characterization.

We report a method for making ultra-thin PDMS membrane devices. Freely suspended membranes as thin as 70 nm have been fabricated. Bulging tests were performed with a custom built fluidic cell to characterize large circular membranes.

Bond-detach lithography: a method for micro/nanolithography by precision PDMS patterning.

We have discovered a micro/nanopatterning technique based on the patterning of a PDMS membrane/film, which involves bonding a PDMS structure/stamp (that has the desired patterns) to a PDMS film. The technique, which we call "bond-detach lithography", was demonstrated (in conjunction with other microfabrication techniques) by transferring several micro- and nanoscale patterns onto a variety of substrates. Bond-detach lithography is a parallel process technique in which a master mold can be used many times, and is particularly simple and inexpensive.

Mechanical properties of nanoparticle chain aggregates by combined AFM and SEM: isolated aggregates and networks.

Mechanical properties of nanoparticle chain aggregates (NCA) including tensile strength and Young's modulus were measured using an instrument incorporating an AFM tip under SEM imaging. The NCA were studied individually and as network films. Carbon NCA were made by laser ablation of graphite, and SnO2 NCA were made by oxidation of a tin compound.

Fabrication of nanopores in a 100-nm thick Si3N4 membrane.

Textured alumina films have been used to fabricate nanoscale pores in Si3N4 membranes. A few nanometer-thick alumina layer was used as a masking material for nanopore fabrication, and the pattern was transferred into a 100-nm thick, 200 microm x 200 microm Si3N4 membrane by reactive ion etching (RIE). The nanopores were found to be concentrated in a approximately 150-microm diameter region at the center of the membrane.

Graphene-based composite materials.

Graphene sheets--one-atom-thick two-dimensional layers of sp2-bonded carbon--are predicted to have a range of unusual properties. Their thermal conductivity and mechanical stiffness may rival the remarkable in-plane values for graphite (approximately 3,000 W m(-1) K(-1) and 1,060 GPa, respectively); their fracture strength should be comparable to that of carbon nanotubes for similar types of defects; and recent studies have shown that individual graphene sheets have extraordinary electronic transport properties. One possible route to harnessing these properties for applications would be to incorporate graphene sheets in a composite material.

Dielectrophoretic assembly of nanowires.

Nanowire (NW) assembly is currently of great interest, partly because NWs are considered as a fundamental component in the fabrication of a variety of devices. A powerful method has been developed to model the assembly of NWs. The three-dimensional dielectrophoretic (DEP) assembly of NWs across opposing electrodes is, for the first time, comprehensively studied using this new method.

Fabrication of nanoelectrodes for neurophysiology: cathodic electrophoretic paint insulation and focused ion beam milling.

The fabrication and characterization of tungsten nanoelectrodes insulated with cathodic electrophoretic paint is described together with their application within the field of neurophysiology. The tip of a 127 mum diameter tungsten wire was etched down to less than 100 nm and then insulated with cathodic electrophoretic paint. Focused ion beam (FIB) polishing was employed to remove the insulation at the electrode's apex, leaving a nanoscale sized conductive tip of 100-1000 nm.

Electro-orientation in particle light valves.

Electro-orientation of rod-like particles in liquids, under the application of an external AC field, is analysed. A rod shape is suitable for particle light valve (PLV) applications. When they are aligned with their long axes parallel to the electric field (and the direction of light is assumed to be parallel to the applied electric field), then it can lead to good transmission of light.

Three-dimensional representation of curved nanowires.

Nanostructures, such as nanowires, nanotubes and nanocoils, can be described in many cases as quasi one-dimensional curved objects projecting in three-dimensional space. A parallax method to construct the correct three-dimensional geometry of such one-dimensional nanostructures is presented. A series of scanning electron microscope images was acquired at different view angles, thus providing a set of image pairs that were used to generate three-dimensional representations using a matlab program.

Effect of interlayer potential on mechanical deformation of multiwalled carbon nanotubes.

A study on the modeling and simulation of interlayer interaction in the multiwalled carbon nanotube (MWCNT) system is presented. We use an interlayer Morse potential previously developed from a local density approximation (LDA) treatment of a bilayer of graphite. We have fit this Morse potential to experimental high-pressure compressibility data for graphite and to a more extensive LDA equation of state (EOS) for graphite, and excellent agreement is observed.

Crystalline boron nanowires.

Ideal nanowire interconnects for nanoelectronics will be refractory, covalently bonded, and highly conductive, irrespective of crystallographic orientation. Theoretical studies suggest that boron nanotubes should be stable and exhibit higher electrical conductivities than those of carbon nanotubes. We describe CVD growth of elemental boron nanowires, which are found to be dense nanowhiskers rather than nanotubes.

Structural Analysis of Collapsed, and Twisted and Collapsed, Multiwalled Carbon Nanotubes by Atomic Force Microscopy.

A fully collapsed multiwalled carbon nanotube (MWCNT1) section and a different twisted and fully collapsed MWCNT were observed with tapping-mode atomic force microscopy. The collapsed section of MWCNT1 was significantly more flexible than the uncollapsed sections, and advanced 120 nm within 1 month. The collapse of MWCNT1 was most likely initiated by its interaction with the surface, and possibly a water meniscus.

Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties.

The mechanical response of 15 single wall carbon nanotube (SWCNT) ropes under tensile load was measured. For 8 of these ropes strain data were obtained and they broke at strain values of 5.3% or lower.

Investigation of the radial deformability of individual carbon nanotubes under controlled indentation force.

Tapping-mode atomic force microscopy was used to study the radial deformability of a multiwalled carbon nanotube (MWCNT). By imaging the MWCNT under different tapping forces, we were able to demonstrate its remarkable reversible radial deformability (up to approximately 40%) and reveal internal discontinuities along its length. The values of the effective elastic modulus of several sections of the MWCNT in the radial direction were estimated with the Hertz model.

Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load.

The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a "nanostressing stage" located within a scanning electron microscope. The tensile-loading experiment was prepared and observed entirely within the microscope and was recorded on video. The MWCNTs broke in the outermost layer ("sword-in-sheath" failure), and the tensile strength of this layer ranged from 11 to 63 gigapascals for the set of 19 MWCNTs that were loaded.

Single crystal metals encapsulated in carbon nanoparticles.

Single-domain microcrystals of LaC(2) encapsulated within nanoscale polyhedral carbon particles have been synthesized in a carbon arc. Typical particle sizes are on the order of 20 to 40 nanometers. The stoichiometry and phase of the La-containing crystals have been assigned from characteristic lattice spacings observed by high-resolution transmission electron microscopy and energy dispersive spectroscopy (EDS).