A Study on the Motion Behavior of Metallic Contaminant Particles in Transformer Insulation Oil under Multiphysical Fields.

When using transformer insulation oil as a liquid dielectric, the oil is easily polluted by the solid particles generated in the operation of the transformer, and these metallic impurity particles have a significant impact on the insulation performance inside the power transformer. The force of the metal particles suspended in the flow insulation oil is multidimensional, which will lead to a change in the movement characteristics of the metal particles. Based on this, this study explored the motion rules of suspended metallic impurity particles in mobile insulating oil in different electric field environments and the influencing factors.

Structural and optical performance of NiV/Ti multilayer mirrors for Z-pinch plasma diagnostic at the wavelength region of 350-450 eV.

This Letter reports on investigations of novel, to the best of our knowledge, NiV(NiV)/Ti multilayer mirrors for the operation in the wavelength region of 350-450 eV. Such mirrors are promising optical components for the Z-pinch plasma diagnostic. The NiV/Ti multilayers show superior structural and optical performance compared to conventional Ni/Ti multilayers.

Hand-Rearing Method for Infant Marmosets.

The common marmoset (Callithrix jacchus) is a small and highly social New World monkey with high reproduction rates, which has been proven to be a compelling non-human primate model for biomedical and neuroscience research. Some females give birth to triplets; however, the parents cannot raise all of them. To save these infants, we have developed a hand-rearing method for raising newborn marmosets.

Comparison of thermal stability of Mo/Si multilayers with different crystallinities of Mo layers.

To investigate the thermal stability of Mo/Si multilayers with different initial crystallinities of Mo layers, two kinds of Mo/Si multilayers were deposited by DC magnetron sputtering and annealed at 300°C and 400°C. The period thickness compactions of multilayers with crystalized and quasi-amorphous Mo layers were 0.15 nm and 0.

Comparative Study on Microstructure of Mo/Si Multilayers Deposited on Large Curved Mirror with and without the Shadow Mask.

The Mo/Si multilayer mirror has been widely used in EUV astronomy, lithography, microscopy and other fields because of its high reflectivity at the wavelength around 13.5 nm. During the fabrication of Mo/Si multilayers on large, curved mirrors, shadow mask was a common method to precisely control the period thickness distribution.

Effect of a High Estrogen Level in Early Pregnancy on the Development and Behavior of Marmoset Offspring.

The use of assisted reproductive technology (ART) has risen steadily worldwide over the past 3 decades and helps many infertile families. However, ART treatments lead to an abnormal internal environment in the uterus, which may increase the risks of health problems for the offspring. Higher maternal estradiol (E) is a notable feature in women who use ART treatments, and this has been suggested as a key factor for the risk of diseases in the offspring.

Cr/C multilayer growth on a heavy metal layer for upgrading of high efficiency tender x-ray gratings.

To increase efficiency of single layer gratings used in the tender x-ray range, a high reflectance multilayer can be directly grown on single layer gratings. Multilayer growth quality was studied by depositing the Cr/C multilayer on a Pt single layer using flat substrates. Their structure quality and adhesion were characterized by atomic force microscopy (AFM), grazing incidence x-ray reflectivity (GIXRR), x-ray scattering (XRS), x-ray diffraction (XRD), and layer adhesion measurement.

Selective corticofugal modulation on sound processing in auditory thalamus of awake marmosets.

Cortical feedback has long been considered crucial for the modulation of sensory perception and recognition. However, previous studies have shown varying modulatory effects of the primary auditory cortex (A1) on the auditory response of subcortical neurons, which complicate interpretations regarding the function of A1 in sound perception and recognition. This has been further complicated by studies conducted under different brain states.

Cr/C lamellar multilayer grating in conical diffraction mounting for beam splitter used in X-ray free-electron lasers.

A lamellar multilayer grating in a conical diffraction mounting was proposed as a beam splitter for X-ray free-electron lasers. Theoretical calculations demonstrated that the distribution of diffraction efficiency can be adjusted by optimizing the groove depth or d-spacing. A Cr/C multilayer lamellar grating with a line density of approximately 2500 L/mm was fabricated.

Corticofugal modulation of temporal and rate representations in the inferior colliculus of the awake marmoset.

Temporal processing is crucial for auditory perception and cognition, especially for communication sounds. Previous studies have shown that the auditory cortex and the thalamus use temporal and rate representations to encode slowly and rapidly changing time-varying sounds. However, how the primate inferior colliculus (IC) encodes time-varying sounds at the millisecond scale remains unclear.

Simulation and measurement of systematic errors of stitching interferometry for high precision X-ray mirrors with large radius of curvature.

To accurately measure the surface figure of curved mirrors with large radius of curvature (RoC) using stitching interferometry methods, three types of measurement errors are systematically studied, including retrace error, defocusing error within a single subaperture, and stitching angle error among different subapertures. It was found that part of the retrace error caused by the mismatch between the reference wavefront and reflected wavefront has little effect, while the overall retrace error, including the influence of the imperfect optical elements, will cause an error of 1-2 nm RMS within a single subaperture. Defocusing error will enlarge the error due to amplification of optical path error caused by the deviation of the position of the CCD.

Mo/Si lamellar multilayer gratings with high efficiency and enhanced resolution for the x-ray region of 1000-1700eV.

The d-spacing of the multilayer lamellar grating was theoretically optimized to improve the energy resolution and maintain a high efficiency. Based on the study of the growth behavior of Mo/Si multilayer on the lamellar grating under different sputtering pressures, Ar gas pressure of 1 mTorr was selected, which can fabricate the multilayer with lower roughness and a good replication of the groove shape. An absolute diffraction efficiency of 25.

Chemical Modification of BC Films and BC/Pd Layers Stored in Different Environments.

BC/Pd multilayers with small d-spacing can easily degrade in the air, and the exact degradation process is not clear. In this work, we studied the chemical modification of BC films and BC/Pd double layers stored in four different environments: a dry nitrogen environment, the atmosphere, a dry oxygen-rich environment, and a wet nitrogen environment. The XANES spectra of the BC/Pd layers placed in a dry oxygen-rich environment showed the most significant decrease in the σ* states of the B-C bonds and an increase in the π* states of the B-O bonds compared with the other samples.

Comparative Study of Pd/BC X-ray Multilayer Mirrors Fabricated by Magnetron Sputtering with Kr and Ar Gas.

Ultrathin Pd/BC multilayers are suitable X-ray mirrors working at the photon energy region of 7-20 keV. To further improve the layer structure, Pd/BC multilayers with a d-spacing of 2.5 nm were fabricated by magnetron sputtering using the heavy noble gas Kr and compared with the conventional ones fabricated by Ar.

Thermal and temporal stability of the nitridated Ru/BC multilayer for high-flux monochromator application.

A nitridated / multilayer with period of 3.0 nm and 80 bilayers were fabricated to study thermal and temporal stability. The multilayer was annealed from room temperature to 490°C, and the in situ X-ray measurements showed that the reflectivity remains mostly unchanged up to 300°C.

Stability of Cr/C multilayer during synchrotron radiation exposure and thermal annealing.

The stability of Cr/C multilayer during irradiation or thermal annealing was investigated using grazing incidence X-ray reflectivity measurement, X-ray photoelectron spectroscopy, X-ray diffraction analysis, small-angle X-ray scattering analysis, and soft X-ray reflectivity measurement. One sample was irradiated with a white beam of synchrotron radiation and five other samples were annealed at various temperatures. The 18-h irradiation treatment caused local surface contaminants but did not affect the buried stacks.

Evolution of the Internal Structure of Short-Period Cr/V Multilayers with Different Vanadium Layers Thicknesses.

Cr/V multilayer mirrors are suitable for applications in the "water window" spectral ranges. To study factors influencing the internal microstructure of Cr/V multilayers, multilayers with different vanadium layers thicknesses varying from 0.6 nm to 4.

Optimized highly efficient multilayer-coated blazed gratings for the tender X-ray region.

The optimized design of multilayer-coated blazed gratings (MLBG) for high-flux tender X-ray monochromators was systematically studied by numerical simulations. The resulting correlation between the multilayer d-spacing and grating blaze angle significantly deviated from the one predicted by conventional equations. Three high line density gratings with different blaze angles were fabricated and coated by the same Cr/C multilayer.

Stress and Microstructure Study of W/Si X-ray Multilayers with Different Structural Parameters.

X-ray Timing and Polarimetry (XTP) telescope is proposed by using nested focusing optics with a large effective area for studies in the field of high energy physics (energy region of 1-30 keV). Highreflectance and low-stress W/Si multilayers are required for this telescope to improve the spectral response and maintain the figure quality of the mirrors simultaneously. In this paper, we focused on the study of stress and layer structure of W/Si periodic multilayers at different -spacings (thickness of period), thickness ratios, and bilayer numbers.

Nitridated Ru/BC multilayer mirrors with improved interface structure, zero stress, and enhanced hard X-ray reflectance.

Ru/BC multilayer mirrors are used for hard X-ray monochromators with moderate spectral resolution and high integral flux. To overcome the problem of large compressive stress inherent in Ru/BC multilayers, a reactive sputtering technique using a mixture working gas of argon and nitrogen with different partial pressures was tested, and the fabricated multilayers had a period of 3 nm. The intrinsic stress was essentially reduced after nitridation and relaxed to zero value at approximately 15% partial pressure of nitrogen in the working gas.

High Reflectance Nanoscale V/Sc Multilayer for Soft X-ray Water Window Region.

V/Sc multilayer is experimentally demonstrated for the first time as a high reflectance mirror for the soft X-ray water window region. It primarily works at above the Sc-L edge (λ = 3.11 nm) under near normal incidence while a second peak appears at above the V-L edge (λ = 2.

Nitridated Pd/BC multilayer mirrors for soft X-ray region: internal structure and aging effects.

Reactive sputtering with a mixture of argon and nitrogen (N partial pressure of 4%, 8%, and 15%) as the working gas is used to develop the high reflectance Pd/BC multilayers for soft X-ray region application. Compared to the pure Ar fabricated sample, the interface roughness of the nitridated multilayer is slightly increased while the compressive stress is essentially relaxed from -623 MPa (pure Ar) to -85 MPa (15% N). A maximum reflectance of 32% is measured at the wavelength of 9.

Structure and stress studies of low temperature annealed W/Si multilayers for the X-ray telescope.

Low stress W/Si multilayer mirrors are demanded in the hard X-ray telescopes to achieve the high angular resolution. To reduce the stress of the as-deposited multilayer and maintain a high reflectivity, two groups of low-temperature annealing experiments were performed on the periodic multilayers with a d-spacing of ~3.8 nm.

Enhancement of the reflectivity of Al/Zr multilayers by a novel structure.

The reflectivity of Al/Zr multilayers is enhanced by the use of a novel structure. The Al layers are divided by insertion of Si layers. In addition, Si barrier layers are inserted at the Al/Zr interfaces (Zr-on-Al and Al-on-Zr).