The Use of Nuclear Magnetic Resonance Spectroscopy (NMR) to Characterize Bitumen Used in the Road Pavements Industry: A Review.

Bitumen, a vital component in road pavement construction, exhibits complex chemo-mechanical properties that necessitate thorough characterization for enhanced understanding and potential modifications. Nuclear Magnetic Resonance (NMR) spectroscopy emerges as a valuable technique for probing the structural and compositional features of bitumen. This review presents an in-depth exploration of the role of NMR spectroscopy in bitumen characterization, highlighting its diverse applications in determining bitumen content, group composition, molecular dynamics, and interaction with additives.

Comparison of ATR-FTIR and NIR spectroscopy for identification of microplastics in biosolids.

Biosolids are considered a potentially major input of microplastics (MPs) to agricultural soils. Our study aims to identify the polymeric origin of MPs extracted from biosolid samples by comparing their Attenuated Total Reflection (ATR) - Fourier-transform infrared (FTIR) spectra with the corresponding near-infrared (NIR) spectra. The reflectance spectra were preprocessed by Savitzky-Golay (SG), first derivative (FD) and compared with analogous spectra acquired on a set of fifty-two selected commercial plastic (SCP) materials collected from readily available products.

New Trends in Biosurfactants: From Renewable Origin to Green Enhanced Oil Recovery Applications.

Enhanced oil recovery (EOR) processes are technologies used in the oil and gas industry to maximize the extraction of residual oil from reservoirs after primary and secondary recovery methods have been carried out. The injection into the reservoir of surface-active substances capable of reducing the surface tension between oil and the rock surface should favor its extraction with significant economic repercussions. However, the most commonly used surfactants in EOR are derived from petroleum, and their use can have negative environmental impacts, such as toxicity and persistence in the environment.

NMR Self-Diffusion and Transverse Relaxation Time in Bitumen: The Effect of Aging.

In this investigation the dynamics of two types of bitumens with different penetration grade were tested by using dynamic shear rheometry (DSR) and Nuclear Magnetic Resonance (NMR) at unaged conditions, and upon both short- and long-term artificial aging. The gel-sol transition temperature was found to increase with increasing the time of aging treatment. Arrhenius parameters of the viscosity were found, unexpectedly, to be correlated with those of simple liquids, suggesting that the two kinds of systems, although chemically and physically quite different, share the same basic process at the molecular level.

A Targeted Mass Spectrometry Approach to Identify Peripheral Changes in Metabolic Pathways of Patients with Alzheimer's Disease.

Alzheimer's disease (AD), a neurodegenerative disorder, is the most common cause of dementia in the elderly population. Since its original description, there has been intense debate regarding the factors that trigger its pathology. It is becoming apparent that AD is more than a brain disease and harms the whole-body metabolism.

Special Issue "Micro/Nano Emulsions: Smart Colloids for Multiple Applications".

Microemulsions are known as thermodynamically stable nanodispersions driven by spontaneous emulsification and are commonly prepared as transparent mixtures composed of oil, water, a surfactant, and a cosurfactant [...

Environmental implications of interaction between humic substances and iron oxide nanoparticles: A review.

Goethite, hematite, ferrihydrite, and other iron oxides bind through various sorption reactions with humic substances (HS) in soils creating nano-, micro-, and macro-aggregates with a specific nature and stability. Long residence times of soil organic matter (SOM) have been attributed to iron-humic substance (Fe-HS) complexes due to physical protection and chemical stabilization at the organic-mineral interface. Humic acids (HA) and fulvic acids (FA) contain many acidic functional groups that interact with Fe oxides through different mechanisms.

The Structure of Bitumen: Conceptual Models and Experimental Evidences.

Bitumen, one of the by-products of petroleum industry processes, is the most common binder used in road pavements and in the construction industry in general. It is a complex organic mixture of a broad range of hydrocarbons classified into four chemical families, collectively known with the acronym SARA fractions, which include saturates, aromatics, resins and asphaltenes. Since the 1940s, researchers working on bitumen and the science behind its existence, nature and application have investigated the spatial organization and arrangement of several molecular species present in the binder.

Bitumen and asphalt concrete modified by nanometer-sized particles: Basic concepts, the state of the art and future perspectives of the nanoscale approach.

Asphalt concretes are biphasic systems, with a predominant phase (c.a. 93-96% w/w) made by the macro-meter sized inorganic aggregates hold together by small amounts of a viscoelastic binding bitumen (c.

Microemulsion Microstructure(s): A Tutorial Review.

Microemulsions are thermodynamically stable, transparent, isotropic single-phase mixtures of two immiscible liquids stabilized by surfactants (and possibly other compounds). The assortment of very different microstructures behind such a univocal macroscopic definition is presented together with the experimental approaches to their determination. This tutorial review includes a necessary overview of the microemulsion phase behavior including the effect of temperature and salinity and of the features of living polymerlike micelles and living networks.

The Role of Additives in Warm Mix Asphalt Technology: An Insight into Their Mechanisms of Improving an Emerging Technology.

The asphalt industry's incentive to reduce greenhouse gas emissions has increased since the 1990s due to growing concerns on environmental issues such as global warming and carbon footprint. This has stimulated the introduction of Warm Mix Asphalt (WMA) and its technologies which serve the purpose of reducing greenhouse gas emissions by reducing the mixing and compaction temperatures of asphalt mix. WMA gained popularity due to the environmental benefit it offers without compromising the properties, performance and quality of the asphalt mix.

Formulation Strategies for Enhancing the Bioavailability of Silymarin: The State of the Art.

Silymarin, a mixture of flavonolignan and flavonoid polyphenolic compounds extractable from milk thistle () seeds, has anti-oxidant, anti-inflammatory, anti-cancer and anti-viral activities potentially useful in the treatment of several liver disorders, such as chronic liver diseases, cirrhosis and hepatocellular carcinoma. Equally promising are the effects of silymarin in protecting the brain from the inflammatory and oxidative stress effects by which metabolic syndrome contributes to neurodegenerative diseases. However, although clinical trials have proved that silymarin is safe at high doses (>1500 mg/day) in humans, it suffers limiting factors such as low solubility in water (<50 μg/mL), low bioavailability and poor intestinal absorption.

Phytoliposome-Based Silibinin Delivery System as a Promising Strategy to Prevent Hepatitis C Virus Infection.

Liposomes are nanocarriers able to solubilize and deliver a wide range of hydrophobic pharmaceuticals and to increase drug bioavailability. They show a natural tendency to hepatic accumulation, and thus represent an optimal drug delivery system for the treatment of liver diseases, including chronic virus hepatitis C. Silibinin, the main and more active component of the seed extract from Silybum Marianum, is a hydrophobic flavolignan emerging as an alternative medication for the treatment of hepatitis C virus infection, as it has been shown to inhibit hepatitis C virus entry and replication.

Spontaneous aggregation of humic acid observed with AFM at different pH.

Atomic force microscopy in contact (AFM-C) mode was used to investigate the molecular dynamics of leonardite humic acid (HA) aggregate formed at different pH values. HA nanoparticles dispersed at pH values ranging from 2 to 12 were observed on a mica surface under dry conditions. The most clearly resolved and well-resulted AFM images of single particle were obtained at pH 5, where HA appeared as supramolecular particles with a conic shape and a hole in the centre.

Phyto-liposomes as nanoshuttles for water-insoluble silybin-phospholipid complex.

Among various phospholipid-mediated drug delivery systems (DDS) suitable for topic and oral administration, phytosome technology represents an advanced innovation, widely used to incorporate standardized bioactive polyphenolic phytoconstituents into phospholipid molecular complexes. In order to extend their potential therapeutic efficiency also to other routes of administration, we proposed a novel phytosome carrier-mediated vesicular system (phyto-liposome) as DDS for the flavonolignan silybin (SIL), a natural compound with multiple biological activities related to its hepatoprotective, anticancer and antioxidant (radical scavenging) effects. We screened the optimum fraction of its phytosome, available in the market as Siliphos™, into liposomes prepared by extrusion, such that vesicle sizes and charges, monitored through dynamic light scattering and laser doppler velocimetry, satisfied several quality requirements.

Particle size, charge and colloidal stability of humic acids coprecipitated with Ferrihydrite.

Humic acids (HA) have a colloidal character whose size and negative charge are strictly dependent on surface functional groups. They are able to complex large amount of poorly ordered iron (hydr)oxides in soil as a function of pH and other environmental conditions. Accordingly, with the present study we intend to assess the colloidal properties of Fe(II) coprecipitated with humic acids (HA) and their effect on Fe hydroxide crystallinity under abiotic oxidation and order of addition of both Fe(II) and HA.

Anticancer cationic ruthenium nanovectors: from rational molecular design to cellular uptake and bioactivity.

An efficient drug delivery strategy is presented for novel anticancer amphiphilic ruthenium anionic complexes, based on the formation of stable nanoparticles with the cationic lipid 1,2-dioleyl-3-trimethylammoniumpropane chloride (DOTAP). This strategy is aimed at ensuring high ruthenium content within the formulation, long half-life in physiological media, and enhanced cell uptake. An in-depth microstructural characterization of the aggregates obtained mixing the ruthenium complex and the phospholipid carrier at 50/50 molar ratio is realized by combining a variety of techniques, including dynamic light scattering (DLS), small angle neutron scattering (SANS), neutron reflectivity (NR), electron paramagnetic resonance (EPR), and zeta potential measurements.

Alkylation of complementary ribonucleotides in nanoreactors.

The aim of the present study was to provide experimental evidence that base pairing, commonly occurring between nucleic bases in more complex supramolecular arrangements, may affect the reaction pathways associated with the alkylation of bases themselves. In pursuit of this aim, dilute aqueous solutions of Cytidine- (CMP) and Guanosine-Mono-Phosphate (GMP) as single reactants or in an equimolar mixture were treated with the electrophilic alkylating agent 1,2-Dodecyl-Epoxide (DE), which was preventively dispersed into micellar solutions prepared with the cationic surfactant hexadecyltrimethylammonium bromide (CTAB). In the early stage of the reaction, CTAB micelles acted as micro-heterogeneous nanoreactors, but as the reaction progressed the systems evolved toward the formation of polydisperse aggregates, whose size and surface-charge properties were monitored as a function of reaction time.

Characterization of the Solutol® HS15/water phase diagram and the impact of the Δ9-tetrahydrocannabinol solubilization.

Here, the phase behavior of the commercial non-ionic surfactant Solutol® HS15 in water was investigated. The focus was on the evolution of the system nanostructure at low water content. Particularly, it was demonstrated that spherical micelles found in dilute surfactant solutions coalesce at a surfactant volume fraction close to 0.

Characterization of synthetic hematite (α-Fe2O3) nanoparticles using a multi-technique approach.

The aim of this work was to investigate the surface structure of aqueous hematite dispersions characterized by a large variability of morphology and particle size combining structural investigations obtained from Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) techniques with in vitro particle size distributions and zeta potential measurements from Dynamic Light Scattering (DLS) technique, and we achieved a self-consistent and detailed characterization of hematite particles whose sizes and morphologies could be correlated to the synthesis conditions (type of added anion, Al substitution and pH). Surface AFM characterization provided an accurate analysis of particle microstructure and also indicated that the growth of microcrystals followed different surface roughness. DLS, AFM, and TEM techniques furnished complementary information on the average particle dimensions, whose variation could be attributed to the morphological difference of hematites, ranging from platy to regular or irregular hexagonal or ellipsoidal shape.

Complementary amphiphilic ribonucleotides confined into nanostructured environments.

This article focuses on the physico-chemical investigation of the time evolution of self-assembled structures composed by oppositely charged surfactant monomers. The cationic components were represented by the well known cetyl-trimethyl-ammonium-bromide (CTAB) while the anionic monomers consisted of amphiphilic ribonucleotide derivatives, also called nucleo-lipids (NL). The latter were generated in situ by direct reaction between a hydrophobic precursor, dodecyl epoxide (DE), and a pair of complementary ribonucleotide mono-phosphates: adenosine mono-phosphate (AMP) and uridine mono-phosphate (UMP).

Reaction mixtures based on the CTAB-Dodecyl Epoxide-water microemulsion for the synthesis of novel Nucleo-Lipids.

Nucleotide-functionalized amphiphiles can be generated in an aqueous microemulsion based on the cationic surfactant CetylTrimethylAmmonium Bromide (CTAB). The lipophilic precursor, Dodecyl Epoxide (DE), was able to hydrophobically modify several types of nucleotides (NMPs) giving rise to the production of novel anionic Nucleo-Lipids (NL), through a ring-opening reaction occurring at level of the CTAB micellar interface. The coexistence of both cationic (CTAB) and NL monomers triggered the spontaneous formation of aqueous suspensions of onion-like aggregates, as confirmed by optical microscopy and spectroturbidimetry.

Nucleotides and nucleolipids derivatives interaction effects during multi-lamellar vesicles formation.

In this paper a micellar interface, constituted by the cationic surfactant CTAB, in presence of 1,2-epoxydodecane and nucleotides was used for catanionic multi-lamellar vesicles (MLVs) formation. The micellar solution of CTAB is able to disperse the 1,2 epoxydodecane in the micellar core promoting the reaction of this reagent with the nucleotide attracted by the positive surface charge of the micellar aggregates. The alkylation of AMP and UMP nucleotides leads to the synthesis of nucleolipids.

Catanionic systems from conversion of nucleotides into nucleo-lipids.

This article focuses on reactions performed in nanostructured environments where the pair of complementary nucleotides, 5'-AMP and 5'-UMP, are converted into their amphiphilic derivatives. The synthesis is carried out by using the hydrophobic reactant dodecyl epoxide (DE) dispersed in a micellar solution based on the cationic surfactant cetyltrimethylammoniumbromide (CTAB). Novel nucleo-lipids monomers and CTAB molecules give rise to the spontaneous self-assembly of catanionic supramolecular structures in water, showing typical Maltese crosses in optical microscopy.

Preparation of nanosize silica in reverse micelles: ethanol produced during TEOS hydrolysis affects the microemulsion structure.

Microemulsions have been widely used as microreactors for the synthesis of nanoparticles and mesoporous materials. The correlation between the microstructure of a microemulsion and the features of the obtained materials is the most intriguing problem. On this point, many investigations have their ground on the structure of the precursor microemulsion, i.