Targeting the Complexity of In Vitro Skin Models: A Review of Cutting-Edge Developments.

Skin in vitro models offer much promise for research, testing drugs, cosmetics, and medical devices, reducing animal testing and extensive clinical trials. There are several in vitro approaches to mimicking human skin behavior, ranging from simple cell monolayer to complex organotypic and bioengineered 3-dimensional models. Some have been approved for preclinical studies in cosmetics, pharmaceuticals, and chemicals.

Bioinspired and Photo-Clickable Thiol-Ene Bioinks for the Extrusion Bioprinting of Mechanically Tunable 3D Skin Models.

Bioinks play a fundamental role in skin bioprinting, dictating the printing fidelity, cell response, and function of bioprinted 3D constructs. However, the range of bioinks that support skin cells' function and aid in the bioprinting of 3D skin equivalents with tailorable properties and customized shapes is still limited. In this study, we describe a bioinspired design strategy for bioengineering double crosslinked pectin-based bioinks that recapitulate the mechanical properties and the presentation of cell-adhesive ligands and protease-sensitive domains of the dermal extracellular matrix, supporting the bioprinting of bilayer 3D skin models.

Uncovering microplastics contamination in canned seafood.

There is limited research on the occurrence of microplastics (MPs) in canned seafood. All types of canned seafood investigated in the present study were contaminated. After sample digestion in 30 % hydrogen peroxide, a total of 40 MPs were recovered.

One-Pot Microfluidics to Engineer Chitosan Nanoparticles Conjugated with Antimicrobial Peptides Using "Photoclick" Chemistry: Validation Using the Gastric Bacterium .

Surface bioconjugation of antimicrobial peptides (AMP) onto nanoparticles (AMP-NP) is a complex, multistep, and time-consuming task. Herein, a microfluidic system for the one-pot production of AMP-NP was developed. Norbornene-modified chitosan was used for NP production (NorChit-NP), and thiolated-AMP was grafted on their surface via thiol-norbornene "photoclick" chemistry over exposure of two parallel UV LEDs.

Estimating Type 2 Diabetes Prevalence: A Model of Drug Consumption Data.

Observational, cross-sectional prevalence studies are costly and time-consuming. The development of indirect methods estimating prevalence used to obtain faster, less-expensive, and more robust results would be an advantage for several healthcare applications. This study aimed to use the drug dispensing data from community pharmacies to estimate the prevalence of Type 2 Diabetes mellitus (T2DM) in the Portuguese population.

Cie L*A*B* Values in VITA Classical and VITA 3D Master by Two Dental Spectrophotometers.

Purpose: To compare the CIE L*a*b* values of two different dental shade guides using two shade-matching spectrophotometers.

Materials And Methods: SpectroShade Micro (SS) and Easyshade (ES) (VITA Zahnfabrik) were tested. One calibrated operator performed 30 measurements of each tab from three batches of the two guides, VITA Classical (VC) and VITA 3D Shade Master (VM).

Different Methods for Assessing Tooth Colour-In Vitro Study.

Colour assessment using digital methods can yield varying results, and it is important for clinicians to recognize the potential variability intra and inter-device. This study aimed to compare the L*a*b* values of VITA Classical (VC) and VITA Toothguide 3D-MASTER (VM) guides using two methods, SpectroShade (SS) and eLAB. Thirty-four measurements per tab were performed by a single operator across three batches of each guide.

Hydrogen Peroxide Diffusion through Dental Tissues-In Vitro Study.

Whitening products commonly utilize hydrogen peroxide (HP) as an active principle, which can penetrate dental tissues with potential side effects due to its low molecular weight. This study aimed to evaluate the HP diffusion of two in-office whitening products, namely 6% VivaStyle Paint On Plus (VS) and Opalescence Boost 40% (OP), in different tooth types. Additionally, the influence of the area of exposure, dental tissue thickness and pulp chamber volume was assessed.

Skin models of cutaneous toxicity, transdermal transport and wound repair.

Skin is widely used as a drug delivery route due to its easy access and the possibility of using relatively painless methods for the administration of bioactive molecules. However, the barrier properties of the skin, along with its multilayer structure, impose severe restrictions on drug transport and bioavailability. Thus, bioengineered models aimed at emulating the skin have been developed not only for optimizing the transdermal transport of different drugs and testing the safety and toxicity of substances but also for understanding the biological processes behind skin wounds.

Organizational culture and the individuals' discretionary behaviors at work: a cross-cultural analysis.

Stating " organizations are defining their culture. Organizational Culture (OC) is the set of values, norms, goals, and expectations shared by all members of an organization that aids in improving their commitment and performance. On the organizational level, it impacts behavior, productivity, and long-term survival by influencing organizational capability.

Metal-Organic Frameworks Applications in Synergistic Cancer Photo-Immunotherapy.

Conventional cancer therapies, such as radiotherapy and chemotherapy, can have long-term side effects. Phototherapy has significant potential as a non-invasive alternative treatment with excellent selectivity. Nevertheless, its applicability is restricted by the availability of effective photosensitizers and photothermal agents, and its low efficacy when it comes to avoiding metastasis and tumor recurrence.

Microplastic contamination in large migratory fishes collected in the open Atlantic Ocean.

Fishes are one of the most important components of the oceans and are exposed to several anthropogenic pressures, namely microplastic (MP), contaminants that are now ubiquitous worldwide. Taking advantage of the 2020 Circumnavigation Expedition carried by the NRP Sagres tall ship of the Portuguese Navy, fish samples from the southern Atlantic ocean were collected to evaluate possible MP contamination. In a total of 14 weeks of campaign, seven large migratory fishes of commercial interest were collected across the middle Atlantic Ocean and along the South American Atlantic coast.

Bleaching efficacy and quality of life of different bleaching techniques - randomized controlled trial.

Objectives: To evaluate bleaching efficacy and oral health-related quality of life (ORHQoL) of three bleaching systems with similar hydrogen peroxide (HP) concentration for up to 6 months post-treatment.

Materials And Methods: A randomized controlled trial was designed with three parallel groups: group A - in-office 6% HP paint-on varnish; group B - at-home 6% HP with adaptable tray; group C - at-home 16% carbamide peroxide with custom tray. At three different stages (baseline, after bleaching, and 6-month follow-up), ORHQoL was evaluated by the OHIP-14 questionnaire and tooth color of the upper canines and central incisors were measured by two shade guides and a spectrophotometer (measuring CIE L*a*b* with respective color/whiteness differences - ΔE/ΔWI).

3D Bioprinting: An Enabling Technology to Understand Melanoma.

Melanoma is a potentially fatal cancer with rising incidence over the last 50 years, associated with enhanced sun exposure and ultraviolet radiation. Its incidence is highest in people of European descent and the ageing population. There are multiple clinical and epidemiological variables affecting melanoma incidence and mortality, such as sex, ethnicity, UV exposure, anatomic site, and age.

Fabrication of Polymer/Graphene Biocomposites for Tissue Engineering.

Graphene-based materials (GBM) are considered one of the 21st century's most promising materials, as they are incredibly light, strong, thin and have remarkable electrical and thermal properties. As a result, over the past decade, their combination with a diverse range of synthetic polymers has been explored in tissue engineering (TE) and regenerative medicine (RM). In addition, a wide range of methods for fabricating polymer/GBM scaffolds have been reported.

3D Cell Culture Models as Recapitulators of the Tumor Microenvironment for the Screening of Anti-Cancer Drugs.

Today, innovative three-dimensional (3D) cell culture models have been proposed as viable and biomimetic alternatives for initial drug screening, allowing the improvement of the efficiency of drug development. These models are gaining popularity, given their ability to reproduce key aspects of the tumor microenvironment, concerning the 3D tumor architecture as well as the interactions of tumor cells with the extracellular matrix and surrounding non-tumor cells. The development of accurate 3D models may become beneficial to decrease the use of laboratory animals in scientific research, in accordance with the European Union's regulation on the 3R rule (Replacement, Reduction, Refinement).

Hydrogen Peroxide Release Kinetics of Four Tooth Whitening Products-In Vitro Study.

Tooth whitening efficacy can be influenced by several factors, of which concentration and application time are two of the most important. This in vitro study aimed to evaluate the initial content and release kinetics of the hydrogen peroxide (HP) content, or the carbamide peroxide (CP) content as converted to its HP equivalent, of four tooth whitening products with different concentrations (6% HP, 16% CP, 10% CP, and 5% CP). Titrations with Cerium Sulphate IV were performed to determine HP concentration.

The individuals' discretionary behaviors at work. An overview and analysis of its growing interest.

Nearly forty years have passed since the term Organizational Citizenship Behavior appeared. Despite a current consensus among scholars about the citizenship gestures as prosocial acts of employees that benefit the organization, it does not apply commonly to the exponential growth of all OCB-related concepts. The concept's expansion has confused the researchers and practitioners, mainly when choosing the most appropriate instruments (constructs) and dimensions to use in their area of interest and context.

An injectable, dual crosslinkable hybrid pectin methacrylate (PECMA)/gelatin methacryloyl (GelMA) hydrogel for skin hemostasis applications.

Biomaterials for effective hemorrhage control are urgently needed in clinics as uncontrolled bleeding is associated with high mortality. Herein, we developed an injectable and in situ photo-crosslinkable hybrid hemostatic hydrogel by combining pectin methacrylate (PECMA) and gelatin methacryloyl (GelMA). This modular material system combines ionic- and photo-crosslinking chemistries to design interpenetrating networks (IPN) exhibiting tunable rheology, highly porous structure, and controllable swelling and mechanical properties.

Engineering Modular Half-Antibody Conjugated Nanoparticles for Targeting CD44v6-Expressing Cancer Cells.

Gastric cancer (GC) remains a major cause of death worldwide mainly because of the late detection in advanced stage. Recently, we proposed CD44v6 as a relevant marker for early detection of GC, opening new avenues for GC-targeted theranostics. Here, we designed a modular nanoscale system that selectively targets CD44v6-expressing GC cells by the site-oriented conjugation of a new-engineered CD44v6 half-antibody fragment to maleimide-modified polystyrene nanoparticles (PNPs) via an efficient bioorthogonal thiol-Michael addition click chemistry.

Tissue-specific engineering: 3D bioprinting in regenerative medicine.

Despite its complexity, the human body is composed of only four basic tissue types, namely epithelial, connective, muscular and nervous tissues. Notably, each tissue is an assemblage of similarly functional cells united in performing a specific function. Instead of mimicking functionality mechanically, three-dimensional (3D) bioprinting based on histological categories is a strategy designed with multiple materials and techniques, which is a versatile technology able to form functional organ structures in line with simplicity.

Bioprinting a Multifunctional Bioink to Engineer Clickable 3D Cellular Niches with Tunable Matrix Microenvironmental Cues.

The properties of the surrounding cell environment are major determinants of cell response in 3D. However, the ability to unravel how these cues dictate the biological function in bioprinted constructs is limited by the lack of extracellular matrix (ECM)-mimetic bioinks with fully controllable properties. In this study, a multifunctional bioink that uniquely combines the independent control over the biochemical and biophysical cues that regulate cell fate with the bioorthogonal nature of thiol-norbornene photoclick chemistry is designed for the extrusion bioprinting of bioinspired 3D cellular niches with tunable properties.

Dental prophylaxis influence in tooth color assessment-Clinical study.

Objective: To evaluate dental prophylaxis influence in tooth color assessment with the use of different methods.

Materials And Methods: Volunteers were consecutively recruited and screened according to appropriate inclusion/exclusion criteria. Each participant's upper right central incisive and canine color was measured before and after dental prophylaxis with a one-week interval.

Improving Health Care Management in Hospitals Through a Productivity Dashboard.

Health information systems have been developed to help hospital managers steer daily operations, including key performance indicators (KPIs) for monitoring on a time-aggregated basis. Yet, current literature lacks in proposals of productivity dashboards to assist hospitals stakeholders. This research focuses on two related problems: (1) hospital organizations need access to productivity information to improve access to services; and (2) managers need productivity information to optimize resource allocation.

Patient-related outcomes in Sjögren syndrome treated with stimulants of salivary secretion: Randomized clinical trial.

Objectives: To investigate the impact of gustatory stimulants of salivary secretion (GSSS) on Sjögren's syndrome patients' self-perception of xerostomia, oral health-related quality of life (OHRQoL) and salivary secretion.

Methods: A total of 110 Sjögren's syndrome patients were randomly allocated to be treated with either a malic acid lozenge or a citric acid mouthwash and then crossed over. Before and after the interventions, the Xerostomia Inventory 5 (SXI-5-PL) and the Oral Health Impact Profile (OHIP-14-PT) questionnaires (both in the Portuguese language) were administered to patients.