A Thermoset Shape Memory Polymer-Based Syntactic Foam with Flame Retardancy and 3D Printability.

Here we report a thermoset shape memory polymer-based syntactic foam inherently integrated with flame retardancy, good mechanical properties, excellent shape memory effect, and 3D printability. The syntactic foam is fabricated by incorporating a high-temperature shape memory polymer (HTSMP) as the matrix, with 40 vol % hollow glass microspheres (HGM) K20, K15, and K1 as fillers. Compressive behavior, strain-controlled programming followed by free recovery, stress recovery, and flame retardancy of these three syntactic foams were studied.

Deep Eutectic Solvents Mixed with Fluorinated Refrigerants for Absorption Refrigeration: A Molecular Simulation Study.

Molecular simulations were performed to evaluate mixtures of fluorinated refrigerants with deep eutectic solvents (DESs), for potential use in single-effect absorption refrigeration cycles that use low quality waste heat sources at temperatures of ∼80 °C. The refrigerants considered were the hydrofluorocarbon R245fa and the hydrofluoroolefins R1234zeE and HFO1336mzzE, whereas the DESs evaluated were 1:2 molar mixtures of choline chloride with either ethylene glycol (ethaline) or levulinic acid (levuline) as hydrogen bond donors (HBDs). Assuming the same cycle operating conditions, the waste heat cycle efficiency η was computed for all working fluid mixtures from molecular simulation results of the mixture densities and Henry's law constants of the refrigerants in the DESs, coupled with phase equilibrium calculations and the enthalpies of the pure refrigerants.

On the Performance of Confined Deep Eutectic Solvents and Ionic Liquids for Separations of Carbon Dioxide from Methane: Molecular Dynamics Simulations.

Classical molecular dynamics simulations were used to investigate the performance of slit graphite and titania (rutile) pores of 5.2 nm in width, partially and completely filled with deep eutectic solvents (DESs) or ionic liquids (ILs), for gas separations of a carbon dioxide-methane mixture of 5:95 molar ratio and temperatures and pressures on the order of 318 K and 100 bar, respectively. The DESs studied were ethaline and levuline (1:2 molar mixtures of choline chloride with ethylene glycol or levulinic acid), and the IL considered was 1- n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf].

Computational Evaluation of Mixtures of Hydrofluorocarbons and Deep Eutectic Solvents for Absorption Refrigeration Systems.

We used computational tools to evaluate three working fluid mixtures for single-effect absorption refrigeration systems, where the generator (desorber) is powered by waste or solar heat. The mixtures studied here resulted from combining a widely used hydrofluorocarbon (HFC) refrigerant, R134a, with three common deep eutectic solvents (DESs) formed by mixing choline chloride (hydrogen bond acceptor, HBA) with urea, glycerol, or ethylene glycol as the hydrogen bond donor (HBD) species. The COSMOtherm/TmoleX software package was used in combination with refrigerant data from NIST/REFPROP, to perform a thermodynamic evaluation of absorption refrigeration cycles using the proposed working fluid mixtures.