Insertion and deletion mutations in the repA4 region of the IncFII plasmid NR1 cause unstable inheritance.

Mutants of IncFII plasmid NR1 that have transposons inserted in the repA4 open reading frame (ORF) are not inherited stably. The repA4 ORF is located immediately downstream from the replication origin (ori). The repA4 coding region contains inverted-repeat sequences that are homologous to the terC inverted repeats located in the replication terminus of the Escherichia coli chromosome.

Suppression of replication-deficient mutants of IncFII plasmid NR1 can occur by two different mechanisms that increase expression of the repA1 gene.

Replication-proficient (Rep+) revertants were isolated from mutants of IncFII plasmid NR1 that were replication defective (Rep-). The parental Rep- plasmids contained a mutation that inactivated promoter PE for transcription of RNA-E, a trans-acting repressor of translation of the essential RepA1 replication initiation protein of NR1. The PE mutation also introduced a nonsense codon into a leader peptide gene that precedes and slightly overlaps the repA1 translation initiation site in the mRNA.

Expression of the repA1 gene of IncFII plasmid NR1 is translationally coupled to expression of an overlapping leader peptide.

Examination of a group of mutants of plasmid NR1 that had lost the expression of IncFII plasmid incompatibility (Inc-) revealed a group that had also lost replication proficiency (Rep-). These mutants were obtained from plasmids in which the NR1 replication control region was present in a cointegrate with plasmid pBR322. Whereas the wild-type parental cointegrate plasmid was capable of replicating in a polA host owing to the PolA independence of NR1 replication, the mutants were not able to transform a polA host.

Autoregulation of the stability operon of IncFII plasmid NR1.

The stb locus of IncFII plasmid NR1, which mediates stable inheritance of the plasmid, is composed of an essential cis-acting DNA site located upstream from two tandem genes that encode essential stability proteins. The two tandem genes, stbA and stbB, are transcribed as an operon from promoter PAB. Using PAB-lacZ gene fusions, it was found that the stb operon is autoregulated.

Transcription of the stability operon of IncFII plasmid NR1.

The stability (stb) locus of IncFII plasmid NR1 is composed of an essential cis-acting DNA site located upstream from two tandem genes that encode essential stability proteins. The stb locus was found to be transcribed from a promoter site just upstream from the first gene, stbA. This promoter was active for transcription both in vivo and in vitro and was located within the region that includes the essential cis-acting site.

DnaA protein is not essential for replication of IncFII plasmid NR1.

By transformation of dnaA null mutant host cells that are suppressed either by an rnh mutation or by chromosomal integration of a mini-R1 plasmid, it was shown that replication of miniplasmids composed of the NR1 minimal replicon had no absolute dependence upon DnaA protein. In addition, the suppression of the dnaA null mutation by the integrated mini-R1, which is an IncFII relative of NR1, was found to be sensitive to the expression of IncFII-specific plasmid incompatibility. This suggests that the integrative suppression by mini-R1 is under the control of the normal IncFII plasmid replication circuitry.

DNA bending near the replication origin of IncFII plasmid NR1.

The DNA replication origin of plasmid NR1 is located approximately 190 base pairs downstream from the 3' end of the repA1 gene, which encodes the essential initiation protein for replication of the plasmid. Restriction endonuclease fragments that contain the NR1 replication origin and its flanking sequences at circularly permuted positions were obtained by digesting oligomers of ori-containing DNA fragments with sets of enzymes that each cut only once in every ori fragment. Polyacrylamide gel electrophoresis of these permuted restriction fragments showed anomalous mobilities, indicating the presence of a DNA bending locus.

Complementation of mutants of the stability locus of IncFII plasmid NR1. Essential functions of the trans-acting stbA and stbB gene products.

A series of unstable mutants of the stability (stb) locus of IncFII plasmid NR1 was subjected to a complementation analysis. The mutant collection included plasmids with point, insertion and deletion mutations in stb. These mutations affected the tandem genes stbA and stbB, which encode stability proteins StbA and StbB, or the PAB transcription promoter, which is located upstream from stbA in a region that contains an essential cis-acting site.

Genetic organization and nucleotide sequence of the stability locus of IncFII plasmid NR1.

The stability (stb) locus of IncFII plasmid NR1 was mapped to a 1700 base-pair NaeI-TaqI restriction fragment. A series of unstable plasmids that contained insertion, deletion, and point mutations that inactivated the stability function was isolated. The unstable point mutants examined were all stabilized (complemented) in trans by a copy of the wild-type stb locus, suggesting that the mutations had inactivated diffusible gene products.

In-vivo studies on the cis-acting replication initiator protein of IncFII plasmid NR1.

Using segment-directed mutagenesis, a temperature-sensitive mutant of the gene that encodes the cis-acting RepA1 initiation protein of the IncFII plasmid NR1 was isolated. The mutant protein was unable to promote initiation of plasmid replication in vivo at 42 degrees C. Both the wild-type and the mutant repA1 genes were cloned separately into the high-expression vector plasmid pAS1.

Transcriptional pausing in a region important for plasmid NR1 replication control.

The results of in vitro single-round transcription experiments indicated that RNA polymerase pauses during transcription of the leader region that precedes the repA1 gene of IncFII plasmid NR1. Transcription initiated at either of the two transcription promoter sites of the repA1 gene, which encodes the essential replication initiation protein of NR1, was observed to pause in this region. Pausing was specifically enhanced by addition of NusA protein, an Escherichia coli transcription accessory factor.

Regulation of mini-F plasmid DNA replication. A quantitative model for control of plasmid mini-F replication in the bacterial cell division cycle.

A quantitative model for the regulation of replication of plasmid mini-F in the Escherichia coli cell division cycle has been developed. The essential repE gene of mini-F encodes a polypeptide that serves both as a positive replication initiation protein and as a regulatory repressor protein. The mini-F regulatory processes include the interaction of repressor with an operator site in the autogenous control of transcription of the repE gene, and the binding of initiator to repeated DNA sequences located both downstream from the repE gene and at the replication origin.

Regulation of IncFII plasmid DNA replication. A quantitative model for control of plasmid NR1 replication in the bacterial cell division cycle.

A quantitative model for the regulation of replication of the low copy number IncFII plasmid NR1 in the Escherichia coli cell division cycle has been developed. The initiation of NR1 replication requires a cis-acting initiator protein whose synthesis is regulated by several mechanisms. The NR1 regulatory processes include co-operative protein-protein interactions in the formation of an active transcription repressor, the interaction of repressor with a rightward operator site in the control of transcription of the initiator gene, and the interaction of an inhibitor RNA transcript with the initiator mRNA in the control of translation of the initiation protein.

Regulation of lambda dv plasmid DNA replication. A quantitative model for control of plasmid lambda dv replication in the bacterial cell division cycle.

A quantitative model for the regulation of replication of plasmid lambda dv in the Escherichia coli cell division cycle has been developed. The regulatory processes include the interactions of cro repressor proteins with the rightward operator DNA sites, the transcriptional activation of the lambda dv replication origin, and the interaction of initiation proteins with activated origins to form functional replication initiation complexes. A statistical thermodynamic model was used to predict probable configurations of the regulatory processes in a single growing cell.

Recombination sites in plasmid drug resistance gene amplification.

The resistance plasmid NR1 derivative pRR330 consists of a neomycin-kanamycin resistance gene (neo-kan) flanked by directly repeated sequences of both insertion element IS1 DNA (768 base pairs) and 840 base pairs of DNA which are a part of the chloramphenicol acetyltransferase (cam) gene. Most Escherichia coli cell populations that were cultured in high neomycin concentrations carried plasmids whose neo-kan gene amplification was mediated either by IS1 DNA or by cam DNA as homologous recombination sites. This suggests that the final amplified cell populations were the descendants of a single cell.

Incompatibility mutants of IncFII plasmid NR1 and their effect on replication control.

DNA from the replication control region of plasmid NR1 or of the Inc- copy mutant pRR12 was cloned into a pBR322 vector plasmid. These pBR322 derivatives were mutagenized in vitro with hydroxylamine and transformed into Escherichia coli cells that harbored either NR1 or pRR12. After selection for the newly introduced pBR322 derivatives only, those cells which retained the unselected resident NR1 or pRR12 plasmids were examined further.

Drug resistance gene amplification of plasmid NR1 derivatives with various amounts of resistance determinant DNA.

Drug resistance gene amplification of derivatives of plasmid NR1 having various amounts of resistance (r) determinant DNA was examined with two types of NR1 derivatives. The first was an NR1 derivative that carried two tandem copies of the r determinant component which was isolated as an intermediate in the amplification process. The plating efficiency of host cells and restriction endonuclease analysis of the plasmid DNA indicate that plasmids with two tandem copies of the r determinant undergo spontaneous amplification to a more highly amplified state at a frequency 150-fold higher than that of wild-type NR1.

Transcription of the replication control region of the IncFII R-plasmid NR1 in vitro and in vivo.

The minimal replicon of the 90,000 base-pair IncFII R plasmid NR1 consists of a 2700 base-pair region of the DNA. Minireplicator plasmids consisting of the 2700 base-pair minimal replicon plus a 2200 base-pair region coding for chloramphenicol acetyltransferase (cat) were used as templates for in vitro transcription. Six RNA transcripts were synthesized from these templates in vitro.

Regulation of transcription of the repA1 gene in the replication control region of IncFII plasmid NR1 by gene dosage of the repA2 transcription repressor protein.

Transcription of the repA1 gene of the IncFII plasmid NR1 is initiated at two promoters in the replication control region. Transcription from the upstream promoter is constitutive at a low level, whereas transcription from the downstream promoter is regulated. The 5' end of the constitutively synthesized transcript also encodes the transcription repressor protein for the regulated downstream promoter.

Analysis of the individual regulatory components of the IncFII plasmid replication control system.

Replication of the IncFII plasmid NR1 is controlled by regulating the amount of synthesis of the repA1 initiator protein at both the transcriptional and translational levels. We have examined mutations which have altered each of these levels of regulation, resulting in different plasmid copy numbers. The genes which encode each of the individual wild-type or mutant regulatory components from the replication control region of NR1 have been cloned independently into pBR322 vectors, and their effects in trans, either individually or in various combinations, on plasmid incompatibility, stability, copy number, and repA1 gene expression have been defined.

Incompatibility and IncFII plasmid replication control.

The DNA coding for replication control and incompatibility of the plasmid NR1 serves as a template in vivo and in vitro for RNA transcription in both directions. In the rightward direction, RNA synthesis begins from 2 different promoters, one of which is regulated and the other constitutive. In vivo, each of these transcripts is more than 1,000 nucleotides long, terminating near the estimated site for the origin of replication.

IncFII plasmid incompatibility product and its target are both RNA transcripts.

The region of DNA coding for incompatibility (inc) and copy number control (cop) of the IncFII plasmid NR1 is transcribed in both the rightward and leftward directions. The rightward transcripts serve as mRNA for the repA1 protein, which is required for replication. A small, 91-base leftward transcript is synthesized from the opposite DNA strand and is complementary to a portion of the rightward mRNA near its 5' end.

Transition of deletion mutants of the composite resistance plasmid NR1 in Escherichia coli and Salmonella typhimurium.

Derivatives of the composite R plasmid NR1 from which a portion of the resistance determinants (r-determinants) component had been deleted were found to undergo amplification of the remaining r-determinants region in Escherichia coli and Salmonella typhimurium. The wild-type NR1 plasmid does not amplify in these genera, although all of these plasmids undergo amplification in Proteus mirabilis. The deletion mutants retained the mercuric ion resistance operon (mer) but conferred a much lower level of sulfonamide resistance than NR1.

Interactive computer programs for the graphic analysis of nucleotide sequence data.

A group of interactive computer programs have been developed which aid in the collection and graphical analysis of nucleotide and protein sequence data. The programs perform the following basic functions: a) enter, edit, list, and rearrange sequence data; b) permit automatic entry of nucleotide sequence data directly from an autoradiograph into the computer; c) search for restriction sites or other specified patterns and plot a linear or circular restriction map, or print their locations; d) plot base composition; e) analyze homology between sequences by plotting a two-dimensional graphic matrix; and f) aid in plotting predicted secondary structures of RNA molecules.