Parvovirus B19 does not bind to membrane-associated globoside in vitro.

The glycosphingolipid globoside (globotetraosylceramide, Gb4Cer) has been proposed to be the cellular receptor of human parvovirus B19. Quantitative measurements of the binding of parvovirus B19 to Gb4Cer were performed to explore the molecular basis of the virus tropism. Solid-phase assays with fluorescence-labeled liposomes or 125iodine-labeled empty capsids were used to characterize the specificity of binding.

A structural perspective of the flavivirus life cycle.

Dengue, Japanese encephalitis, West Nile and yellow fever belong to the Flavivirus genus, which is a member of the Flaviviridae family. They are human pathogens that cause large epidemics and tens of thousands of deaths annually in many parts of the world. The structural organization of these viruses and their associated structural proteins has provided insight into the molecular transitions that occur during the viral life cycle, such as assembly, budding, maturation and fusion.

Structural and virological studies of the stages of virus replication that are affected by antirhinovirus compounds.

Pleconaril is a broad-spectrum antirhinovirus and antienterovirus compound that binds into a hydrophobic pocket within viral protein 1, stabilizing the capsid and resulting in the inhibition of cell attachment and RNA uncoating. When crystals of human rhinovirus 16 (HRV16) and HRV14 are incubated with pleconaril, drug occupancy in the binding pocket is lower than when pleconaril is introduced during assembly prior to crystallization. This effect is far more marked in HRV16 than in HRV14 and is more marked with pleconaril than with other compounds.

Design, expression, and purification of a Flaviviridae polymerase using a high-throughput approach to facilitate crystal structure determination.

Bovine viral diarrhea virus (BVDV) nonstructural protein 5B is an RNA-dependent RNA polymerase, essential for viral replication. Initial attempts to crystallize a soluble form of the 695-residue BVDV polymerase did not produce any crystals. Limited proteolysis, homology modeling, and mutagenesis data were used to aid the design of polymerase constructs that might crystallize more readily.

Conformational switching by the scaffolding protein D directs the assembly of bacteriophage phiX174.

The three-dimensional structure of bacteriophage phiX174 external scaffolding protein D, prior to its interaction with other structural proteins, has been determined to 3.3 angstroms by X-ray crystallography. The crystals belong to space group P4(1)2(1)2 with a dimer in the asymmetric unit that closely resembles asymmetric dimers observed in the phiX174 procapsid structure.

Conformational changes of the flavivirus E glycoprotein.

Dengue virus, a member of the Flaviviridae family, has a surface composed of 180 copies each of the envelope (E) glycoprotein and the membrane (M) protein. The crystal structure of an N-terminal fragment of E has been determined and compared with a previously described structure. The primary difference between these structures is a 10 degrees rotation about a hinge relating the fusion domain DII to domains DI and DIII.

Discrimination among rhinovirus serotypes for a variant ICAM-1 receptor molecule.

Intercellular adhesion molecule 1 (ICAM-1) is the cellular receptor for the major group of human rhinovirus serotypes, including human rhinovirus 14 (HRV14) and HRV16. A naturally occurring variant of ICAM-1, ICAM-1Kilifi, has altered binding characteristics with respect to different HRV serotypes. HRV14 binds to ICAM-1 only transiently at physiological temperatures but forms a stable complex with ICAM-1Kilifi.

Three-dimensional rearrangement of proteins in the tail of bacteriophage T4 on infection of its host.

The contractile tail of bacteriophage T4 undergoes major structural transitions when the virus attaches to the host cell surface. The baseplate at the distal end of the tail changes from a hexagonal to a star shape. This causes the sheath around the tail tube to contract and the tail tube to protrude from the baseplate and pierce the outer cell membrane and the cell wall before reaching the inner cell membrane for subsequent viral DNA injection.

The structure of human parvovirus B19.

Human parvovirus B19 is the only parvovirus known to be a human pathogen. The structure of recombinant B19-like particles has been determined to approximately 3.5-A resolution by x-ray crystallography and, to our knowledge, represents the first near-atomic structure of an Erythrovirus.

The functional domains of bacteriophage t4 terminase.

The packaging of double-stranded genomic DNA into some viral and all bacteriophage capsids is driven by powerful molecular motors. In bacteriophage T4, the motor consists of the portal protein assembly composed of twelve copies of gene product 20 (gp20, 61 kDa) and an oligomeric terminase complex composed of gp16 (18 kDa) and gp17 (70 kDa). The packaging motor drives the 171-kbp T4 DNA into the capsid utilizing the free energy of ATP hydrolysis.

The bacteriophage T4 DNA injection machine.

The tail of bacteriophage T4 consists of a contractile sheath surrounding a rigid tube and terminating in a multiprotein baseplate, to which the long and short tail fibers of the phage are attached. Upon binding of the fibers to their cell receptors, the baseplate undergoes a large conformational switch, which initiates sheath contraction and culminates in transfer of the phage DNA from the capsid into the host cell through the tail tube. The baseplate has a dome-shaped sixfold-symmetric structure, which is stabilized by a garland of six short tail fibers, running around the periphery of the dome.

Molecular architecture of the prolate head of bacteriophage T4.

The head of bacteriophage T4 is a prolate icosahedron with one unique portal vertex to which the phage tail is attached. The three-dimensional structure of mature bacteriophage T4 head has been determined to 22-A resolution by using cryo-electron microscopy. The T4 capsid has a hexagonal surface lattice characterized by the triangulation numbers T(end) = 13 laevo for the icosahedral caps and T(mid) = 20 for the midsection.

The structure of the RNA-dependent RNA polymerase from bovine viral diarrhea virus establishes the role of GTP in de novo initiation.

The bovine viral diarrhea virus (BVDV) RNA-dependent RNA polymerase can initiate RNA replication by a de novo mechanism without a primer. The structure of BVDV polymerase, determined to 2.9-A resolution, contains a unique N-terminal domain, in addition to the fingers, palm, and thumb domains common to other polymerases.

The phiX174 protein J mediates DNA packaging and viral attachment to host cells.

Packaging of viral genomes into their respective capsids requires partial neutralization of the highly negatively charged RNA or DNA. Many viruses, including the Microviridae bacteriophages phiX174, G4, and alpha3, have solved this problem by coding for a highly positively charged nucleic acid-binding protein that is packaged along with the genome. The phiX174 DNA-binding protein, J, is 13 amino acid residues longer than the alpha3 and G4 J proteins by virtue of an additional nucleic acid-binding domain at the amino terminus.

Dimeric rous sarcoma virus capsid protein structure relevant to immature Gag assembly.

The structure of the N-terminal domain (NTD) of Rous sarcoma virus (RSV) capsid protein (CA), with an upstream 25 amino acid residue extension corresponding to the C-terminal portion of the Gag p10 protein, has been determined by X-ray crystallography. Purified Gag proteins of retroviruses can assemble in vitro into virus-like particles closely resembling in vivo-assembled immature virus particles, but without a membrane. When the 25 amino acid residues upstream of CA are deleted, Gag assembles into tubular particles.

Structural analyses of Phycodnaviridae and Iridoviridae.

The Phycodnaviridae, Iridoviridae and related viruses, with diameters of 1500-2000 A, are formed from large trigonal arrays of hexagonally close-packed capsomers forming the faces of icosahedra [Yan et al. (2000), Nature Struct. Biol.

Structure and morphogenesis of bacteriophage T4.

Bacteriophage T4 is one of the most complex viruses. More than 40 different proteins form the mature virion, which consists of a protein shell encapsidating a 172-kbp double-stranded genomic DNA, a 'tail,' and fibers, attached to the distal end of the tail. The fibers and the tail carry the host cell recognition sensors and are required for attachment of the phage to the cell surface.

Visualization of membrane protein domains by cryo-electron microscopy of dengue virus.

Improved technology for reconstructing cryo-electron microscopy (cryo-EM) images has now made it possible to determine secondary structural features of membrane proteins in enveloped viruses. The structure of mature dengue virus particles was determined to a resolution of 9.5 A by cryo-EM and image reconstruction techniques, establishing the secondary structural disposition of the 180 envelope (E) and 180 membrane (M) proteins in the lipid envelope.

Three-dimensional structure of bacteriophage T4 baseplate.

The baseplate of bacteriophage T4 is a multiprotein molecular machine that controls host cell recognition, attachment, tail sheath contraction and viral DNA ejection. We report here the three-dimensional structure of the baseplate-tail tube complex determined to a resolution of 12 A by cryoelectron microscopy. The baseplate has a six-fold symmetric, dome-like structure approximately 520 A in diameter and approximately 270 A long, assembled around a central hub.

Bacteriophage phi29 scaffolding protein gp7 before and after prohead assembly.

Three-dimensional structures of the double-stranded DNA bacteriophage phi29 scaffolding protein (gp7) before and after prohead assembly have been determined at resolutions of 2.2 and 2.8 A, respectively.

Structures of immature flavivirus particles.

Structures of prM-containing dengue and yellow fever virus particles were determined to 16 and 25 A resolution, respectively, by cryoelectron microscopy and image reconstruction techniques. The closely similar structures show 60 icosahedrally organized trimeric spikes on the particle surface. Each spike consists of three prM:E heterodimers, where E is an envelope glycoprotein and prM is the precursor to the membrane protein M.

Structure and location of gene product 8 in the bacteriophage T4 baseplate.

Many bacteriophages, such as T4, T7, RB49, and phi29, have complex, sometimes multilayered, tails that facilitate an almost 100% success rate for the viral particles to infect host cells. In bacteriophage T4, there is a baseplate, which is a multiprotein assembly, at the distal end of the contractile tail. The baseplate communicates to the tail that the phage fibers have attached to the host cell, thereby initiating the infection process.