Publications by authors named "Rosa A Perez"

Gluten-free cereal products have grown in popularity in recent years as they are perceived as "healthier" alternatives and can be safely consumed by celiac patients, and people with gluten intolerance or wheat allergies. Molds that produce mycotoxins contaminate cereal crops, posing a threat to global food security. Maximum levels have been set for certain mycotoxins in cereal flours; however, little is known about the levels of emerging mycotoxins in these flours.

View Article and Find Full Text PDF

The use of plant-based fish feed may increase the risk of contamination by mycotoxins. The multiresidue analysis of mycotoxins in fish feed presents many difficulties due to the complexity of the matrix, the different characteristics of the compounds, and their presence in highly different concentration levels. The aim of this study was to develop a selective, sensitive, and efficient analytical method for the simultaneous determination of 15 mycotoxins (regulated and emerging mycotoxins) in aquaculture feed by LC-MS/MS.

View Article and Find Full Text PDF

The amacrine neurons in the mammalian retina comprise a large variety of cell types with distinct properties and functions that serve to integrate and modulate signals presented to output neurons. The majority of them use either glycine or GABA as inhibitory neurotransmitters and express the glycine transporter 1 (GlyT1) or glutamic acid decarboxylase (GAD67) and GABA transporters (GAT1 and GAT3), as a glycinergic or GABAergic marker respectively. We report here a novel subpopulation of amacrine neurons expressing both, GABAergic and glycinergic markers, in retinas from wild-type C57BL/6J mice and two transgenic lines.

View Article and Find Full Text PDF

Cereals are staple foods for human consumption in both developed and developing countries. In order to improve agricultural outputs, resources like reclaimed water for irrigation and biosolids and manure as fertilizers are frequently used, although they may increase the input of contaminants that can potentially be absorbed by crops and enter the food chain. Emerging contaminants (human and veterinary pharmaceuticals, personal care products, surfactants, plasticizers, and industrial additives, among others) are continuously introduced in the environment from a variety sources and these contaminants may enter the food chain through plant uptake.

View Article and Find Full Text PDF

The main entry routes of antibiotics in the environment are the application of organic wastes to improve soil quality and the irrigation with recycled water. Once in the environment, antibiotics can be introduced in the food chain through their uptake by crops. This paper describes the development of an analytical method based on ultrasound-assisted extraction for the determination of seven antibiotics in lettuce.

View Article and Find Full Text PDF

Antibiotics may be present in agricultural soils through the application of organic amendments as fertilizers or by irrigation of fields with recycled water. As a result of these agricultural practices, antibiotics in soil can lead to their uptake by plants, entering in this way the food chain. Studies on the levels of antibiotics in cereal samples are scarce in the available literature.

View Article and Find Full Text PDF

The co-exposure of soil organisms to ZnO nanoparticles (ZnO NPs) and pesticides is likely to take place in agricultural soils. However, the impacts of co-exposure on terrestrial ecosystems are virtually unknown. In this paper, Eisenia andrei was exposed for a 28-day period to serial concentrations of ZnO NPs and/or the organophosphate insecticide chlorpyrifos (CPF) in natural soil, and was evaluated for single and joint effects.

View Article and Find Full Text PDF

The availability and persistence of various antibiotics in soil and soil amended with composted poultry manure were investigated through laboratory incubation assays. Six veterinary antibiotics (one fluoroquinolone, two tetracyclines, two sulfonamides and one lincosamide) and one active metabolite (ciprofloxacin) were studied. The incubation assays were conducted at a controlled temperature of 25 °C with different water regimes, such as constant moisture content (80% of water holding capacity) and drying-rewetting cycles.

View Article and Find Full Text PDF

A multiresidue method was developed for the determination of 19 emerging organic contaminants (pharmaceutical drugs, personal care products, and bisphenol A) in poultry manure. Lyophilized samples of manure were extracted by ultrasound-assisted matrix solid-phase dispersion and the extracts were analyzed by gas chromatography with tandem mass spectrometry after derivatization. Analysis of spiked poultry manure samples, at levels ranging from 25 to 150 ng/g, gave satisfactory recovery results for all the compounds, with values from 67 to 106%.

View Article and Find Full Text PDF

Macrolides are one of the most commonly used families of antibiotics employed in human and veterinary treatment. These compounds are considered emerging contaminants with potential ecological and human health risks that could be present in surface water. This paper describes the development and application of a simple and efficient extraction procedure for the determination of tilmicosin; erythromycin, tylosin and erythromycin-HO from water samples.

View Article and Find Full Text PDF

Bisphenol analogues are compounds extensively used which have been potentially linked to adverse health effects. Nevertheless, few studies reported the analysis of compounds, other than bisphenol A, in environmental solid samples and none in soil samples. In this study, a rapid and sensitive analytical method is presented for the simultaneous determination of 13 bisphenols in soil samples.

View Article and Find Full Text PDF

A rapid extraction procedure is presented for the determination of five endocrine-disrupting compounds, estrone, ethinylestradiol, bisphenol A, triclosan, and 2-ethylhexylsalicylate, in water samples. The analysis involves a two-step extraction procedure that combines dispersive liquid-liquid microextraction (DLLME) with dispersive micro-solid phase extraction (D-μ-SPE), using magnetic nanoparticles, followed by in situ derivatization in the injection port of a gas chromatograph coupled to triple quadrupole mass spectrometry. The use of uncoated or oleate-coated FeO nanoparticles as sorbent in the extraction process was evaluated and compared.

View Article and Find Full Text PDF

Two magnetic solid-phase extraction methods (mSPE) were developed and compared for the extraction and preconcentration of polychlorinated biphenyls (PCBs) from water and soil leachates. Analyses were carried out by gas chromatography coupled to triple quadrupole mass spectrometry. The mSPE extraction parameters were optimised using Fe3O4 nanoparticles coated with palmitate or oleate.

View Article and Find Full Text PDF

In this work, a rapid and sensitive method, based on ultrasound-assisted extraction of samples with a small volume of toluene, has been developed for the quantification of C60 and C70 fullerenes in soil and sediments. Good extraction efficiencies were obtained at all of the fortification levels studied (200, 100, 20 and 2 ng/g), which ranged from 72 to 104%. An important effect of the extraction temperature was observed on C60 recoveries, and an acceptable decrease in the recovery rates was observed in aged samples.

View Article and Find Full Text PDF

A sensitive analytical method is presented for the simultaneous determination of four synthetic estrogens and six steroid hormones in sludge-amended soil. The method employs matrix solid-phase dispersion (MSPD) followed by isotope dilution gas chromatography-tandem mass spectrometry injecting a large volume sample (10μL) after trimethylsilyl derivatization, using the solvent vent mode. It affords good resolution, high sensitivity and reproducibility and freedom from interferences even from complex matrices as soil amended with sewage sludge.

View Article and Find Full Text PDF

This paper reviews the sample preparation techniques used for the analysis of pesticides in soil. The present status and recent advances made during the last 5 years in these methods are discussed. The analysis of pesticide residues in soil requires the extraction of analytes from this matrix, followed by a cleanup procedure, when necessary, prior to their instrumental determination.

View Article and Find Full Text PDF

Different extraction methods, followed by gas chromatography coupled to triple quadrupole mass spectrometry, were evaluated for simultaneous extraction of seven polychlorinated biphenyls (PCBs) and six polybrominated diphenyl ethers (PBDEs) from common weeds. Pressurized liquid extraction (PLE) with in-cell clean-up, ultrasound-assisted extraction (UAE) with in-column clean-up, and UAE with dispersive solid-phase extraction (dSPE) clean-up were evaluated and compared. In-cell clean-up with 4 g Florisil and 0.

View Article and Find Full Text PDF

The determination of organic contaminants in soil is a real challenge due to the large number of these compounds with quite different physico-chemical properties. In the present work, an analytical method was developed for the simultaneous determination in soil of 40 organic contaminants belonging to different chemical classes: polycyclic aromatic hydrocarbons, polychlorinated biphenyls, polybrominated diphenyl ethers, UV filters, parabens, bisphenols and triclosan. Soil was extracted by pressurized liquid extraction and the extracts, without the need of a clean-up step, were analyzed by gas chromatography-tandem mass spectrometry after in situ derivatization in the gas chromatographic system.

View Article and Find Full Text PDF

A rapid method for determination of seven parabens and two chlorinated by-products in sewage sludge was developed based on matrix solid-phase dispersion and gas chromatography-tandem mass spectrometry. The analytical procedure showed good recoveries that ranged from 80 to 125%, with relative standard deviations lower than 12% and low detection limits, ranging from 0.1 to 2.

View Article and Find Full Text PDF

A method using solid-phase microextraction (SPME) and gas chromatography/mass spectrometry was developed and applied to the determination of volatile compounds generated in meat, at different times, from ground beef stored under refrigeration. Selection of the extractive fiber, extraction time, and headspace (HS) or direct extraction was optimized for the determination of volatile compounds from ground meat. Various fibers were investigated, and carboxen/polydimethylsiloxane was selected for these analyses.

View Article and Find Full Text PDF

Stingless bees (Tribe Meliponini) are a diverse group of highly eusocial bees distributed throughout the tropics and subtropics. Trigona carbonaria honey, from Australia, was characterized by traditional physicochemical parameters (acidity, sugars, diastase, electrical conductivity, hydroxymethylfurfural, invertase, nitrogen, and water content) and other compositional factors (flavonoids, polyphenols, organic acids, and water activity), as well as total antioxidant capacity and radical scavenging activity. For the Australian T.

View Article and Find Full Text PDF
Article Synopsis
  • Researchers studied 53 honey samples from Spain, which included different types of honey like floral and honeydew.
  • They looked at things like acidity, chemical properties, and how well the honey can fight off harmful substances.
  • The results showed that the types and amounts of amino acids in the honey are important for how well it can protect against those bad substances, even more than the polyphenols, which are also good for health.
View Article and Find Full Text PDF

Headspace solid-phase microextraction (SPME), followed by gas chromatography (GC)-mass spectrometry (MS) determination, has been used for the analysis of honey volatiles. Two SPME fibers were employed to study the composition of volatiles from various types of Spanish honeys. The best results were obtained with the Carboxen/PDMS fiber, using a homogenization time of 1 h at 70 degrees C and a sampling period of 30 min.

View Article and Find Full Text PDF