Encapsulated Cell Dynamics in Droplet Microfluidic Devices with Sheath Flow.

In this paper we study the dynamics of single cells encapsulated in water-in-oil emulsions in a microchannel. The flow field of a microfluidic channel is coupled to the internal flow field of a droplet through viscous traction at the interface, resulting in a rotational flow field inside the droplet. An encapsulated single cell being subjected to this flow field responds by undergoing multiple orbits, spins, and deformations that depend on its physical properties.

Interpretable Classification of Bacterial Raman Spectra With Knockoff Wavelets.

Deep neural networks and other machine learning models are widely applied to biomedical signal data because they can detect complex patterns and compute accurate predictions. However, the difficulty of interpreting such models is a limitation, especially for applications involving high-stakes decision, including the identification of bacterial infections. This paper considers fast Raman spectroscopy data and demonstrates that a logistic regression model with carefully selected features achieves accuracy comparable to that of neural networks, while being much simpler and more transparent.

Modeling of Droplet Generation in a Microfluidic Flow-Focusing Junction for Droplet Size Control.

In this paper, we study the parameters that affect the generation of droplets in a microfluidic flow-focusing junction. Droplets are evaluated based on the size and frequency of generation. Droplet size control is essential for microfluidic lab-on-a-chip applications in biology, chemistry, and medicine.

A vibrating beam MEMS accelerometer for gravity and seismic measurements.

This paper introduces a differential vibrating beam MEMS accelerometer demonstrating excellent long-term stability for applications in gravimetry and seismology. The MEMS gravimeter module demonstrates an output Allan deviation of 9 μGal for a 1000 s integration time, a noise floor of 100 μGal/√Hz, and measurement over the full ±1 g dynamic range (1 g = 9.81 ms).

Micron-gap spacers with ultrahigh thermal resistance and mechanical robustness for direct energy conversion.

In thermionic energy converters, the absolute efficiency can be increased up to 40% if space-charge losses are eliminated by using a sub-10-µm gap between the electrodes. One practical way to achieve such small gaps over large device areas is to use a stiff and thermally insulating spacer between the two electrodes. We report on the design, fabrication and characterization of thin-film alumina-based spacers that provided robust 3-8 μm gaps between planar substrates and had effective thermal conductivities less than those of aerogels.

ALD HfO Films for Defining Microelectrodes for Electrochemical Sensing and Other Applications.

Microelectrodes are used in a wide range of applications from analytical electrochemistry and biomolecular sensing to in vivo implants. While a variety of insulating materials have been used to define the microelectrode active area, most are not suitable for nanoscale electrodes (<1 μm) due to the limited robustness of these films when the film thickness is on the order of the nanoelectrode dimension. In this study, we investigate atomic layer deposited hafnium dioxide (ALD HfO) as an insulating film to coat planar platinum microelectrodes, with the active areas being defined where the HfO is etched.

Three-dimensional integration of nanotechnologies for computing and data storage on a single chip.

The computing demands of future data-intensive applications will greatly exceed the capabilities of current electronics, and are unlikely to be met by isolated improvements in transistors, data storage technologies or integrated circuit architectures alone. Instead, transformative nanosystems, which use new nanotechnologies to simultaneously realize improved devices and new integrated circuit architectures, are required. Here we present a prototype of such a transformative nanosystem.

Electropermanent magnet actuation for droplet ferromicrofluidics.

Droplet actuation is an essential mechanism for droplet-based microfluidic systems. On-demand electromagnetic actuation is used in a ferrofluid-based microfluidic system for water droplet displacement. Electropermanent magnets (EPMs) are used to induce 50 mT magnetic fields in a ferrofluid filled microchannel with gradients up to 6.

Design and fabrication of silicon-tessellated structures for monocentric imagers.

Compared with conventional planar optical image sensors, a curved focal plane array can simplify the lens design and improve the field of view. In this paper, we introduce the design and implementation of a segmented, hemispherical, CMOS-compatible silicon image plane for a 10-mm diameter spherical monocentric lens. To conform to the hemispherical focal plane of the lens, we use flexible gores that consist of arrays of spring-connected silicon hexagons.

Engineering Ultra-Low Work Function of Graphene.

Low work function materials are critical for energy conversion and electron emission applications. Here, we demonstrate for the first time that an ultralow work function graphene is achieved by combining electrostatic gating with a Cs/O surface coating. A simple device is built from large-area monolayer graphene grown by chemical vapor deposition, transferred onto 20 nm HfO2 on Si, enabling high electric fields capacitive charge accumulation in the graphene.

Tunable control of antibody immobilization using electric field.

The controlled immobilization of proteins on solid-state surfaces can play an important role in enhancing the sensitivity of both affinity-based biosensors and probe-free sensing platforms. Typical methods of controlling the orientation of probe proteins on a sensor surface involve surface chemistry-based techniques. Here, we present a method of tunably controlling the immobilization of proteins on a solid-state surface using electric field.

Microbead-separated thermionic energy converter with enhanced emission current.

The efficiency of thermionic energy converters is a strong function of the inter-electrode separation due to space-charge limitations. Here we demonstrate vacuum thermionic energy converters constructed using barium dispenser cathodes and thin film tungsten anodes, separated by size specific alumina microbeads for simple device fabrication and inter-electrode gap control. The current and device efficiency at the maximum power point are strongly dependent on the inter-electrode gap, with a maximum device efficiency of 0.

Thermionic current densities from first principles.

We present a density functional theory-based method for calculating thermionic emission currents from a cathode into vacuum using a non-equilibrium Green's function approach. It does not require semi-classical approximations or crude simplifications of the electronic structure used in previous methods and thus provides quantitative predictions of thermionic emission for adsorbate-coated surfaces. The obtained results match well with experimental measurements of temperature-dependent current densities.

An orbital-overlap model for minimal work functions of cesiated metal surfaces.

We introduce a model for the effect of cesium adsorbates on the work function of transition metal surfaces. The model builds on the classical point-dipole equation by adding exponential terms that characterize the degree of orbital overlap between the 6s states of neighboring cesium adsorbates and its effect on the strength and orientation of electric dipoles along the adsorbate-substrate interface. The new model improves upon earlier models in terms of agreement with the work function-coverage curves obtained via first-principles calculations based on density functional theory.

Control of DNA capture by nanofluidic transistors.

We report the use of an array of electrically gated ~200 nm solid-state pores as nanofluidic transistors to manipulate the capture and passage of DNA. The devices are capable of reversibly altering the rate of DNA capture by over 3 orders of magnitude using sub-1 V biasing of a gate electrode. This efficient gating originates from the counter-balance of electrophoresis and electroosmosis, as revealed by quantitative numerical simulations.

Single crystal silicon nanopillars, nanoneedles and nanoblades with precise positioning for massively parallel nanoscale device integration.

Arrays of precisely positioned single crystal silicon nanopillars, nanoneedles, and nanoblades with minimum feature sizes as small as 30 nm are fabricated using entirely scalable top-down fabrication techniques. Using the same scalable technologies, devices consisting of electrically connected silicon nanopillars with multiple addressable electrodes for each nanostructure are realized. The arrays of nanopillars, nanoneedles, and nanoblades are shown to exhibit Raman signal enhancement on 1,2-benzenedithiol monolayers, opening a path to nanodevices that manipulate, position, detect and analyze molecules.

Electrical and thermal conduction in atomic layer deposition nanobridges down to 7 nm thickness.

While the literature is rich with data for the electrical behavior of nanotransistors based on semiconductor nanowires and carbon nanotubes, few data are available for ultrascaled metal interconnects that will be demanded by these devices. Atomic layer deposition (ALD), which uses a sequence of self-limiting surface reactions to achieve high-quality nanolayers, provides an unique opportunity to study the limits of electrical and thermal conduction in metal interconnects. This work measures and interprets the electrical and thermal conductivities of free-standing platinum films of thickness 7.

Photon-enhanced thermionic emission for solar concentrator systems.

Solar-energy conversion usually takes one of two forms: the 'quantum' approach, which uses the large per-photon energy of solar radiation to excite electrons, as in photovoltaic cells, or the 'thermal' approach, which uses concentrated sunlight as a thermal-energy source to indirectly produce electricity using a heat engine. Here we present a new concept for solar electricity generation, photon-enhanced thermionic emission, which combines quantum and thermal mechanisms into a single physical process. The device is based on thermionic emission of photoexcited electrons from a semiconductor cathode at high temperature.

Suspended mechanical structures based on elastic silicon nanowire arrays.

We demonstrate a bottom-up/top-down combined method for the fabrication of horizontally suspended, well-oriented and size-controlled Si nanowire arrays. Mechanical beamlike structures composed of multiple ordered arrays consecutively linked by transversal microspacers are obtained by this method. Such structures are used to investigate the mechanical elasticity of the nanowire arrays by atomic force microscopy.

Selective growth of Si nanowire arrays via galvanic displacement processes in water-in-oil microemulsions.

Galvanic displacement processes are employed in water-in-oil microemulsions to deposit gold nanoclusters selectively on Si surfaces and sidewalls. The gold clusters then serve as catalysts to achieve selective growth of vertically and laterally aligned Si nanowire arrays by chemical vapor deposition via the vapor-liquid-solid growth mechanism. The size of the gold clusters is shown to have a good correlation with the microemulsion parameters, which in turn controls the size of the synthesized nanowires.

Microbioreactor arrays with parametric control for high-throughput experimentation.

A scalable array technology for parametric control of high-throughput cell cultivations is demonstrated. The technology makes use of commercial printed circuit board (PCB) technology, integrated circuit sensors, and an electrochemical gas generation system. We present results for an array of eight 250 microl microbioreactors.

Microbioreactor arrays with parametric control for high-throughput experimentation.

A scalable array technology for parametric control of high-throughput cell cultivations is demonstrated. The technology makes use of commercial printed circuit board (PCB) technology, integrated circuit sensors, and an electrochemical gas generation system. We present results for an array of eight 250 microl microbioreactors.