Ferulic acid-loaded polymeric nanoparticles prepared from nano-emulsion templates facilitate internalisation across the blood-brain barrier in model membranes.

A hydroxycinnamic acid derivative, namely ferulic acid (FA) has been successfully encapsulated in polymeric nanoparticles (NPs) based on poly(lactic--glycolic acid) (PLGA). FA-loaded polymeric NPs were prepared from O/W nano-emulsion templates using the phase inversion composition (PIC) low-energy emulsification method. The obtained PLGA NPs exhibited high colloidal stability, good drug-loading capacity, and particle hydrodynamic diameters in the range of 74 to 117 nm, depending on the FA concentration used.

Polymer nanoparticles from low-energy nanoemulsions for biomedical applications.

The formulation of nanoemulsions by low-energy strategies, particularly by the phase inversion composition method, and the use of these nanoemulsions as templates for the preparation of polymer nanoparticles for biomedical applications are reviewed. The methods of preparation, nature of the components in the formulation, and their impact on the physicochemical properties, drug loading, and drug release are discussed. We highlight the utilization of ethyl cellulose, poly(lactic--glycolic acid), and polyurethane/polyurea in the field of nanomedicine as potential drug delivery systems.

Rosmarinic Acid-Loaded Polymeric Nanoparticles Prepared by Low-Energy Nano-Emulsion Templating: Formulation, Biophysical Characterization, and In Vitro Studies.

Rosmarinic acid (RA), a caffeic acid derivative, has been loaded in polymeric nanoparticles made up of poly(lactic--glycolic acid) (PLGA) through a nano-emulsion templating process using the phase-inversion composition (PIC) method at room temperature. The obtained RA-loaded nanoparticles (NPs) were colloidally stable exhibiting average diameters in the range of 70-100 nm. RA was entrapped within the PLGA polymeric network with high encapsulation efficiencies and nanoparticles were able to release RA in a rate-controlled manner.

Chromonic nematic liquid crystals in a room-temperature ionic liquid.

Planar multiaromatic molecules hierarchically and selectively arrange into nematic chromonic liquid crystals in the room temperature ionic liquid 2-hydroxyethylammonium formate. In a proof of concept, these liquid crystals were used as reaction media to produce mesostructured silica materials under mild biomimetic conditions. Several other applications are envisaged.

A nanocellulose-based platform towards targeted chemo-photodynamic/photothermal cancer therapy.

Cellulose nanocrystals (CNCs) have advantages as drug delivery carriers because of their biocompatibility and the presence of hydroxyl groups which favor chemical modification and drug binding. The present study describes the development of novel multifunctional rod-like CNCs-based carriers as therapeutic platforms: CNCs were hybridized with folic acid for actively targeting tumor cells, carbon dots (Cdots) for both imaging and photodynamic/photothermal treatments and doxorubicin (DOX) as an anticancer drug. Hybridized carriers displayed excellent drug-loading capacity.

1D materials from ionic self-assembly in mixtures containing chromonic liquid crystal mesogens.

Ionic self-assembly is a simple yet powerful method to obtain robust nanostructures. Herewith, we use mixtures of oppositely-charged porphyrins that can act as mesogens to form chromonic liquid crystals in water, i.e.

Functionalized PLGA nanoparticles prepared by nano-emulsion templating interact selectively with proteins involved in the transport through the blood-brain barrier.

During the last few decades, extensive efforts has been made to design nanocarriers to transport drugs into the central nervous system (CNS). However, its efficacy is limited due to the presence of the Blood-Brain Barrier (BBB) which greatly reduces drug penetration making Drug Delivery Systems (DDS) necessary. Polymeric nanoparticles (NPs) have been reported to be appropriate for this purpose and in particular, poly(lactic-co-glycolic acid) (PLGA) has been used for its ability to entrap small molecule drugs with great efficiency and the ease with which it functionalizes NPs.

Short and ultrashort antimicrobial peptides anchored onto soft commercial contact lenses inhibit bacterial adhesion.

Commercial soft contact lenses were chemically modified to incorporate antibacterial properties. Contact lenses and especially soft contact lenses present a risk of eye microbial infection that eventually may lead to vision loss. This is a significant health issue given the large population of contact lenses wearers worldwide.

Biomedical perfluorohexane-loaded nanocapsules prepared by low-energy emulsification and selective solvent diffusion.

Perfluorohexane-loaded nanocapsules are interesting materials for many biomedical applications such as oxygen delivery systems or contrast agents. However, their formulation into stable colloidal systems is challenging because of their hydro- and lipophobicity, high density and high vapour pressure. In this study, perfluorohexane-loaded polymeric nanocapsules are prepared for the first time by low-energy emulsification and selective solvent diffusion.

Cubic liquid crystalline structures in diluted, concentrated and highly concentrated emulsions for topical application: Influence on drug release and human skin permeation.

Novel emulsions with a nanostructured continuous phase have been proposed as controlled drug delivery systems to enhance topical delivery of active ingredients avoiding systemic effects. In this study, oil-in-water (O/W) emulsions with two surfactant/water (S/W) weight ratios of 40:60 and 35:65, and oil concentrations of 10 wt% (diluted emulsion), 40 wt% (concentrated emulsion) and 85 wt% (highly concentrated emulsion) have been investigated to identify the presence of liquid crystalline structures and their influence on drug release and skin permeation. The emulsions have been characterized in terms of visual appearance, rheology and drug release.

Template-directed self-organization of colloidal PbTe nanocrystals into pillars, conformal coatings, and self-supported membranes.

We demonstrate the formation of three morphologies relevant for integration with miniaturized devices-microscale pillars, conformal coatings, and self-supported membranes- template-directed self-organization of lead telluride (PbTe) colloidal nanocrystals (NCs). Optimizing the self-organization process towards producing one of these morphologies typically involves adjusting the surface chemistry of the particles, as a means of controlling the particle-particle and particle-template interactions. In contrast, we have produced each of the three morphologies of close-packed NCs by adjusting only the solvent and concentration of NCs, to ensure that the high quality of the 10 nm PbTe NCs produced by hot-injection colloidal synthesis, which we used as model "building blocks," remains consistent across all three configurations.

Formulating stable hexosome dispersions with a technical grade diglycerol-based surfactant.

We report on the phase behavior of a technical grade and commercially available diglycerol monoisostearate, C41V, and its use for the preparation of nanostructured liquid crystal dispersions (hexosomes). C41V in water forms a reverse hexagonal liquid crystal at room temperature and in a wide range of concentrations (0.5-95 wt%); this hexagonal liquid crystal is stable up to 70 °C.

Development of Inhalable Superparamagnetic Iron Oxide Nanoparticles (SPIONs) in Microparticulate System for Antituberculosis Drug Delivery.

Tuberculosis (TB) is an infectious disease which affects millions of people worldwide. Inhalable polymeric dry powders are promising alternatives as anti-TB drug carriers to the alveoli milieu and infected macrophages, with potential to significantly improve the therapeutics efficiency. Here, the development of a magnetically responsive microparticulate system for pulmonary delivery of an anti-TB drug candidate (P3) is reported.

Novel synthetic routes of large-pore magnetic mesoporous nanocomposites (SBA-15/FeO) as potential multifunctional theranostic nanodevices.

In this paper, novel magnetic silica nanocomposites were prepared by anchoring magnetite nanoparticles onto the outer surface of mesoporous SBA-15 silica; the magnetic nanoparticles were prepared by microemulsion and solvothermal methods, varying the synthesis conditions in order to control the final physicochemical, textural and magnetic properties. The morphology and mesostructure of the materials were characterized by X-ray diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), N adsorption-desorption, and Transmission and Scanning Electron Microscopy (TEM and SEM). Magnetic silica nanocomposites feature a two-dimensional hexagonal arrangement constituted by a homogeneous pore channel system with diameters between 13 and 18 nm and a Brunauer-Emmett-Teller (BET) surface area higher than 260 m g.

Adsorption of marine phycotoxin okadaic acid on a covalent organic framework.

Phycotoxins, compounds produced by some marine microalgal species, can reach high concentrations in the sea when a massive proliferation occurs, the so-called harmful algal bloom. These compounds are especially dangerous to human health when concentrated in the digestive glands of seafood. In order to generate an early warning system to alert for approaching toxic outbreaks, it is very important to improve monitoring methods of phycotoxins in aquatic ecosystems.

A colloidally stable water dispersion of Ni nanowires as an efficient T-MRI contrast agent.

A colloidally stable dispersion of anisotropic Ni nanowires in water has been achieved showing good performance as a T-contrast agent in magnetic resonance imaging (MRI). A wet chemistry approach has been developed that renders water dispersible Ni nanowires of controlled size. Firstly, an array of Ni/Au multilayer nanowires of tailored dimensions was synthesized by pulsed electrodeposition within a porous alumina template in a three-electrode cell at room-temperature.

From Chromonic Self-Assembly to Hollow Carbon Nanofibers: Efficient Materials in Supercapacitor and Vapor-Sensing Applications.

Carbon nanofibers (CNFs) with high surface area (820 m/g) have been successfully prepared by a nanocasting approach using silica nanofibers obtained from chromonic liquid crystals as a template. CNFs with randomly oriented graphitic layers show outstanding electrochemical supercapacitance performance, exhibiting a specific capacitance of 327 F/g at a scan rate of 5 mV/s with a long life-cycling capability. Approximately 95% capacitance retention is observed after 1000 charge-discharge cycles.

EGFR-Based Immunoisolation as a Recovery Target for Low-EpCAM CTC Subpopulation.

Circulating tumour cells (CTCs) play a key role in the metastasis process, as they are responsible for micrometastasis and are a valuable tool for monitoring patients in real-time. Moreover, efforts to develop new strategies for CTCs isolation and characterisation, and the translation of CTCs into clinical practice needs to overcome the limitation associated with the sole use of Epithelial Cell Adhesion Molecule (EpCAM) expression to purify this tumour cell subpopulation. CTCs are rare events in the blood of patients and are believed to represent the epithelial population from a primary tumour of epithelial origin, thus EpCAM immunoisolation is considered an appropriate strategy.

A supramolecular strategy based on molecular dipole moments for high-quality covalent organic frameworks.

A supramolecular strategy based on strong molecular dipole moments is presented to gain access to covalent organic framework structures with high crystallinity and porosity. Antiparallel alignment of the molecules within the pore walls is proposed to lead to reinforced columnar stacking, thus affording a high-quality material. As a proof of principle, a novel pyrene dione building block was prepared and reacted with hexahydroxytriphenylene to form a boronic ester-linked covalent organic framework.

Self-Assembly and Formation of Chromonic Liquid Crystals from the Dyes Quinaldine Red Acetate and Pyronin Y.

The aqueous self-assembly behavior of the dyes Quinaldine red acetate and Pyronin Y in a wide range of concentrations is reported here for the first time. (1)H NMR spectroscopy, polarized-light optical microscopy, and small and wide X-ray scattering were used to get insight into molecular interactions, phase boundaries and aggregate structure. Quinaldine red acetate and Pyronin Y self-organize into unimolecular stacks driven by attractive aromatic interactions.

Up-scaling the synthesis of Cu₂O submicron particles with controlled morphologies for solar H₂ evolution from water.

The synthesis of Cu2O was studied to examine the effects of up-scaling on the size and morphology of the resultant particles. As a result, a successful protocol employing an automated laboratory reactor was developed for large-scale synthesis of phase-pure Cu2O colloids with specific sizes in the submicron to micrometer range (0.2-2.

High-Temperature Magnetism as a Probe for Structural and Compositional Uniformity in Ligand-Capped Magnetite Nanoparticles.

To investigate magnetostructural relationships in colloidal magnetite (FeO) nanoparticles (NPs) at high temperature (300-900 K), we measured the temperature dependence of magnetization () of oleate-capped magnetite NPs ca. 20 nm in size. Magnetometry revealed an unusual irreversible high-temperature dependence of for these NPs, with dip and loop features observed during heating-cooling cycles.

Multiple emulsions as soft templates for the synthesis of multifunctional silicone porous particles.

Multiple emulsion templating is a versatile strategy for the synthesis of porous particles. The present work addresses the synthesis of multifunctional poly(dimethylsiloxane) porous particles using multiple water-in-oil-in-water emulsions as soft templates with an oil phase constituted by a crosslinkable poly(dimethylsiloxane) (PDMS) oil. Herewith, the impact of the viscosity of PDMS oil (i.

Microbeads and hollow microcapsules obtained by self-assembly of pickering magneto-responsive cellulose nanocrystals.

Cellulose microbeads can be used as immobilization supports. We report on the design and preparation of magneto-responsive cellulose microbeads and microcapsules by self-assembled shells of cellulose nanocrystals (CNC) carrying magnetic CoFe2O4 nanoparticles, that is, a mixture of isotropic and anisotropic nanomaterials. The magnetic CNCs formed a structured layer, a mesh, consisting of CNCs and magnetic particles bound together on the surface of distinct droplets of hexadecane and styrene dispersed in water.