In vitro evaluation of the influence of ultrasonic activation on physicochemical properties of three endodontic repair materials.

The influence of ultrasonic activation (UA) on the physicochemical properties of setting time (n = 5), volumetric stability (n = 10), alkalizing activity/calcium ions release (pH/Ca) (n = 10) and calcium/phosphate-rich substance formation in simulated body fluid (Hank's balanced salt solution; HBSS) of three cements was evaluated: white MTA-Angelus (MTA), MTA Repair HP (MTAHP) and Biodentine (BIO). It was observed that UA influenced the setting times (min) distinctly, delaying the initial setting time of MTA (40.8/64.

Reducing Apical Bacterial Extrusion: The Impact of Reciproc File Size and Irrigation Technique.

Introduction: This study used different irrigation techniques to compare the levels of apical bacterial extrusion during the preparation of root canals with a reciprocating instrument widely used in endodontics, the Reciproc files 25/0.08 and 40/0.06.

Does the Mixing Method of AH Plus Jet Affect its Physicochemical and Mechanical Properties?

Introduction: The purpose of this study was to evaluate whether the mixing method of AH Plus Jet sealer affects its physicochemical and mechanical properties.

Methods: The properties of AH Plus Jet sealer were analyzed when mixed using either the Auto Mix Tip or manual mixing. The evaluated properties included radiopacity (n = 5), initial and final setting times (n = 5), flow (n = 5), and solubility (n = 3), following specifications outlined in ISO 6876/2012 and ADA Nº 57/2000.

Impact of different agitation methods on smear layer cleaning of mesial canals with accentuated curvature.

Objectives: This study evaluated the impact of different methods of irrigant agitation on smear layer removal in the apical third of curved mesial canals of 3 dimensionally (D) printed mandibular molars.

Materials And Methods: Sixty 3D-printed mandibular second molars were used, presenting a 70° curvature and a Vertucci type II configuration in the mesial root. A round cavity was cut 2 mm from the apex using a trephine of 2 mm in diameter, 60 bovine dentin disks were made, and a smear layer was formed.

Referred pain is associated with greater odontogenic spontaneous pain and a heightened pain sensitivity in patients with symptomatic irreversible pulpitis.

Background: Symptomatic irreversible pulpitis often results in heightened reactions to thermal stimuli such as pain evoked by a cold stimulus, and spontaneous odontogenic pain (unprovoked pain).

Objective: This study primarily compared the clinical manifestations of odontogenic spontaneous pain and pain provoked by cold stimulus specifically focusing on their sensory discriminative characteristics (intensity, duration and quality) between symptomatic irreversible pulpitis patients with and without referred pain.

Methods: Twenty-three patients with symptomatic irreversible pulpitis with referred pain and 12 patients without referred pain were included in this cross-sectional study.

Biaxial flexural strength of hydrothermally aged resin-based materials.

Purpose: The strength of temporary restorations plays a vital role in full-mouth reconstruction, and it can be impacted by the aging process. The aim of this in vitro study was to evaluate the biaxial flexural strength and fractographic features of different resin-based materials submitted to thermal aging.

Material And Methods: One hundred and ninety-two resin disc-shaped specimens (6.

Influence of Different Apical Foramen Morphologies on the Accuracy of Four Electronic Foramen Locators.

Objective:  The aim of this study was to evaluate the accuracy of the Root ZX II (RZX), Raypex 6 (RAY), EPex Pro (EPEX), and CanalPro (CNP) electronic foramen locators (EFLs) in different foraminal morphologies (fully formed foramen, immature foramen with parallel walls, and immature foramen with divergent walls); this article also evaluated the influence of different penetration levels (0.0 mm and -1.0 mm).

Publication trends of the Journal of Esthetic and Restorative Dentistry: A bibliometric analysis.

Objective: The Journal of Esthetic and Restorative Dentistry (JERD) stands out as one of the most prominent international journals publishing research in esthetic dentistry. This study analyzed articles published by JERD since the year 2000 through bibliometric analysis.

Methodology: The search was conducted in January 2024 using Scopus.

Biological response to endodontic treatment in one versus two-visit: a systematic review and meta-analysis of animal studies.

Objectives: To perform a systematic review of animal studies that compared the histopathological characteristics between teeth with apical periodontitis after endodontic treatment in one or two visits.

Materials And Methods: This systematic review was registered on the International Prospective Register of Systematic Reviews (PROSPERO) - CRD42022340849. Studies were collected from PubMed/MEDLINE, LILACS, EMBASE, Livivo, SciELO, Web of Science, Scopus, and Cochrane Library and manual and gray literature searches.

Micro-CT Assessment of Filling Removal Effectiveness in the Apical Third of Curved Canals with Different Types of Anatomy.

Introduction: The aim of this study was to assess the effectiveness of filling removal material from the apical third of curved mesial root canals of mandibular molars. Reciprocating instrumentation followed by additional rotary instrumentation with instruments made of alloys with different heat treatments was evaluated.

Materials And Methods: Thirty-six mesial roots of mandibular molars were divided into two groups: Group Class IV consisted of 16 roots with two independent canals, and Group Class II consisted of 20 roots with two canals that merged into one at their apical level.

Effectiveness of a new endodontic irrigation system for removing smear layer and dissolving simulated organic matter.

Objectives: The study aimed to evaluate the potential for the dissolution of organic tissue in areas of simulated complexity and cleaning of root canal walls of the new iVac® endodontic irrigation system.

Material And Methods: Thirty mandibular premolars were evaluated by scanning electron microscopy before and after biomechanical preparation. Then, they were distributed according to the final irrigation protocol into groups with conventional irrigation, ultrasonic agitation with metallic insert (UA), and iVac® system, and new photomicrographs were obtained.

A Global Overview of Guided Endodontics: A Bibliometric Analysis.

Introduction: This review aimed to analyze the trend and main characteristics of articles related to guided endodontics (GE).

Methods: The search was conducted in May 2023 on Web of Science. GE-related articles were included, and conferences were excluded.

Divergence between confidence and knowledge of endodontists regarding non-odontogenic pain.

Introduction: This study aimed to assess the self-reported levels of confidence and knowledge related to non-odontogenic pain among a group of Brazilian endodontists.

Methodology: A total of one hundred and forty-six endodontists affiliated with the Brazilian Society of Endodontics participated in the survey. The questionnaire, distributed via email or WhatsApp, contained inquiries designed to gauge self-perceived confidence and knowledge concerning non-odontogenic pain.

To flat or not to flat? Exploring the impact of flat-side design on rotary instruments using a comprehensive multimethod investigation.

Aim: To assess the influence of a flat-side design on the geometry, metallurgy, mechanical performance and shaping ability of a novel nickel-titanium rotary instrument.

Methodology: Sixty-five new 25-mm flat-side rotary instruments (size 25, taper 0.04) and their nonflat-side prototypes (n = 65) were assessed for major deformations and examined regarding macroscopic and microscopic design, determination of nickel and titanium elements ratio, measurement of phase transformation temperature and evaluation of mechanical performance parameters including time/cycles to fracture, maximum torque, angle of rotation, maximum bending and buckling strengths and cutting ability.

Cyclic and torsional fatigue resistance of a new rotary file on a rotary and reciprocating motion.

This study evaluated the cyclic and torsional fatigue resistance of a new nickel-titanium (Flat File 25.04) instrument on the continuous and reciprocating motion. Sixty instruments of the ProDesign Logic2 25.

The use of sodium hypochlorite mixed with etidronic acid during canal preparation increases debris extrusion.

The purpose of this study was to compare the impact of different irrigation protocols on debris extrusion. Single-rooted teeth were distributed into groups based on the irrigation protocols (n = 40): 2.5% NaOCl (biomechanical preparation: 20 mL and final irrigation: 5 mL); 2.

Evaluation of cyclic and torsional fatigue resistance of several heat-treated reciprocating nickel-titanium instruments.

This study investigated the cyclic fatigue and torsional resistance of Unicone Plus (UCP 25.06), Unicone (UC 25.06), Reciproc Blue (RB 25.

Ex Vivo Evaluation of the Efficacy of Photodynamic Therapy in Eliminating Enterococcus faecalis from Dentinal Tubules by Confocal Laser Scanning Microscopy.

Introduction: The aim of the present study was to investigate ex vivo by confocal laser scanning microscopy the antibacterial effect of photodynamic therapy (PDT) on dentinal tubules in the apical 5 mm of human mandibular premolars contaminated with Enterococcus faecalis.

Methods: Thirty-four teeth were standardized to 20 mm and foraminal anatomic diameters using a #20 K-file (Dentsply Maillefer). Samples were contaminated for 21 days and divided into the following 3 experimental groups (n = 10): the PDT group (instrumented canals and PDT), the passive ultrasonic irrigation (PUI) group (instrumented canals and PUI), and the PUI-PDT group (instrumented canals, PUI, and PDT), along with a control group (n = 4) (noninstrumented canals).

Postoperative Pain After Using Passive Ultrasonic Irrigation and EasyClean Device, Irrigation Activation Techniques: A Randomized Clinical Trial.

Introduction: This randomized clinical trial aimed to compare postoperative pain after the use of 2different irrigation activation techniques: passive ultrasonic irrigation and the EasyClean device.

Methods: Sixty-six single-rooted teeth diagnosed with asymptomatic pulp necrosis and apical periodontitis were randomly assigned to 2experimental groups (n = 33), which differed in the irrigation activation technique. Postoperative pain levels were assessed after 24, 48, and 72 hours using a verbal rating scale; the ibuprofen intake amount was recorded at the same time intervals.

Influence of temperature on the torsional properties of two thermally treated NiTi rotary instruments.

This study aimed to evaluate the influence of temperature on torsional strength and angular deflection of two experimental NiTi rotary instruments manufactured from Blue and Gold thermal treatments and with identical cross-sections. A total of 40 experimental NiTi instruments 25.06 and with a triangular cross-section and manufactured from Blue and Gold thermal treatments were used (n=20).

Comparative analysis of torsional and cyclic fatigue resistance of ProGlider, WaveOne Gold Glider, and TruNatomy Glider in simulated curved canal.

Objectives: This study aimed to compare the torsional and cyclic fatigue resistance of ProGlider (PG), WaveOne Gold Glider (WGG), and TruNatomy Glider (TNG).

Materials And Methods: A total of 15 instruments of each glide path system ( = 15) were used for each test. A custom-made device simulating an angle of 90° and a radius of 5 millimeters was used to assess cyclic fatigue resistance, with calculation of number of cycles to failure.

New Ultrasonic Tip for Root Canal Filling of the Mesial Canals of Mandibular Molars with Isthmus: A Laboratory Evaluation Using Computed Microtomography.

Introduction: The obturation quality of the mandibular molar mesial canals and isthmuses with two thermoplastic techniques, ultrasonic vertical condensation (UVC) and continuous wave of condensation (CWC), was evaluated using computed microtomography (μCT).

Methods: Thirty-six human mandibular molars had been previously scanned and analyzed using μCT for mesial roots with morphologically similar isthmuses for this study. Coronal access and confirmation of foraminal patency were performed, and the actual length of the teeth was established using a clinical microscope (40X magnification).

Effect of A Clinical-Replicable Cooling Protocol on the Cyclic Fatigue Resistance of Heat-Treated Nickel-Titanium Instruments.

Introduction: The aim of this study was to evaluate the bending and cyclic fatigue resistance of Wave One Gold (WOG) and X1 Blue (X1B) instruments when tested at body temperature (36°C ± 1°C) with and without subjected to an alloy cooling protocol.

Materials And Methods: A total of sixty instruments (n=30) were tested. Forty instruments (n=20) were randomly selected and divided into two groups: body temperature (BT; n=20) and body temperature with cooling protocol (CP; n=20).

Penetrability of AH Plus Sealer into Dentinal Tubes after Retreatment Procedure with Rotary or Reciprocating Systems and Two Additional Cleaning Methods.

Introduction: The aim of this study was to evaluate the AH Plus sealer penetration into dentinal tubules after root canal retreatment followed by two additional cleaning methods.

Methods And Materials: Thirty-two mandibular premolars with single canal were prepared up to the F4 ProTaper Universal instrument and filled by a single cone technique with the addition of Rhodamine B dye to Endofill sealer. For the retreatment procedure, the teeth were randomly divided into four experimental groups (=8) as follows: Reciproc R40 with ultrasonic activation (RU), Reciproc R40 with sonic agitation (RS), ProTaper Next until X4 instrument with ultrasonic activation (PTNU), and ProTaper Next (X4) with sonic activation (PTNS).

Impact of the final agitation system in the irrigant diffusion inside the root canal: A micro-CT analysis.

This study evaluated, through micro-computed tomography (micro-CT), the volume of irrigant diffusion by different techniques of final agitation. Sixty mesiobuccal canals were scanned in a micro-CT and standardised according to the volume. They were instrumented with the MTwo 40/04 system and using the Terebrix 35 contrast solution as irrigant, were divided into six groups (n = 10): Conventional irrigation with syringe and needle (CI), EndoActivator (EA), EasyClean (EC), RinsEndo (RE), Utrasonic agitation (UI) and XP-Clean (XP).