Hierarchical Nafion enhanced carbon aerogels for sensing applications.

This work describes the fabrication of hierarchical 3D Nafion enhanced carbon aerogels (NECAGs) for sensing applications via a fast freeze drying method. Graphene oxide, multiwalled carbon nanotubes and Nafion were mixed and extruded into liquid nitrogen followed by the removal of ice crystals by freeze drying. The addition of Nafion enhanced the mechanical strength of NECAGs and effective control of the cellular morphology and pore size was achieved.

Wholly printed polypyrrole nanoparticle-based biosensors on flexible substrate.

Printing has been widely used in the sensor industry for its speed, low cost and production scalability. In this work we present a wholly-printed polypyrrole (PPy) based biosensor produced by inkjet printing bioinks composed of dispersions of PPy nanoparticles and enzymes onto screen-printed carbon electrodes. Two enzymes, horseradish peroxidase (HRP) or glucose oxidase (GoD) were incorporated into the PPy nanoparticle dispersions to impart biosensing functionality and selectivity into the conducting polymer ink.

High-performance multifunctional graphene yarns: toward wearable all-carbon energy storage textiles.

The successful commercialization of smart wearable garments is hindered by the lack of fully integrated carbon-based energy storage devices into smart wearables. Since electrodes are the active components that determine the performance of energy storage systems, it is important to rationally design and engineer hierarchical architectures atboth the nano- and macroscale that can enjoy all of the necessary requirements for a perfect electrode. Here we demonstrate a large-scale flexible fabrication of highly porous high-performance multifunctional graphene oxide (GO) and rGO fibers and yarns by taking advantage of the intrinsic soft self-assembly behavior of ultralarge graphene oxide liquid crystalline dispersions.

Scalable solid-template reduction for designed reduced graphene oxide architectures.

Herein, we report a solid-state reduction process (in contrast to solution-based approach) by using an environmentally friendly reductant, such as vitamin C (denoted VC), to be directly employed to solid-state graphene oxide (GO) templates to give the highly active rGO architecture with a sheet resistance of as low as 10 Ω sq(-1). In addition, predesigned rGO patterns/tracks with tunable resistivity can be directly "written" on a preprepared solid GO film via the inkjet-printing technique using VC/H2O as the printing-ink. This advanced reduction process allows foreign active materials to be preincorporated into the GO matrix to form quality active composite architectures.

Fabrication and characterization of cytocompatible polypyrrole films inkjet printed from nanoformulations cytocompatible, inkjet-printed polypyrrole films.

Inkjet printed polypyrrole (PPy) films with good uniformity and conductivity are fabricated from a stable, printable PPy nanodispersion, and the cytocompatability of these platforms is demonstrated using PC12 cells. This novel approach to fabricating PPy electrodes and films for tissue engineering and cell stimulation is particularly useful where microstructures are required.

The citrate-mediated shape evolution of transforming photomorphic silver nanoparticles.

The photoconversion of photomorphic silver nanoparticles from discs to prisms via citrate mediated growth on the twin plane faces of the nanoparticles is demonstrated. This systematic shape evolution from discs to hexagons and then prisms of increasing aspect ratios is a result of the growth process being confined to specific faces of the growing nanoparticles.

Nanofibrilar-polyaniline/Carbon nanotube composites: aqueous dispersions and films.

Entirely nanostructured nanofibrilar-polyaniline/multi-walled carbon nanotube (NF-PANI/MWNT) composites with nanotube loadings as high as 50 wt% were synthesized via a facile in-situ chemical polymerization process. These are composed of a nanofibrilar polyaniline (NF-PANI) matrix in which multi-walled carbon nanotubes (MWNTs) are homogeneously embedded and partially covered by polyaniline. Stable and homogeneous aqueous dispersions in concentrations up to 10 mg/ml in water easily were prepared.

Inkjet printed LED based pH chemical sensor for gas sensing.

Predictable behaviour is a critical factor when developing a sensor for potential deployment within a wireless sensor network (WSN). The work presented here details the fabrication and performance of an optical chemical sensor for gaseous acetic acid analysis, which was constructed using inkjet printed deposition of a colorimetric chemical sensor. The chemical sensor comprised a pH indicator dye (bromophenol blue), phase transfer salt tetrahexylammonium bromide and polymer ethyl cellulose dissolved in 1-butanol.

Paired emitter-detector diode detection with dual wavelength monitoring for enhanced sensitivity to transition metals in ion chromatography with post-column reaction.

The combination of post-column derivatisation and visible detection are regularly employed in ion chromatography (IC) to detect poorly absorbing species. Although this mode is often highly sensitive, one disadvantage is the increase in repeating baseline artifacts associated with out-of-sync pumping systems. The work presented here will demonstrate the use of a second generation design paired emitter-detector diode (PEDD-II) detection mode offering enhanced sensitivity to transition metals in IC by markedly reducing this problem and also by improving signal noise.

Novel fused-LEDs devices as optical sensors for colorimetric analysis.

The development of a novel, low power optical sensing platform based on light emitting diodes (LEDs) is described. The sensor is constructed from a pair of LEDs fused together at an angle where one LED functions as the light source and the other LED is reverse biased to function as a light detector. Sensor function is based on the level of light received by the detector diode, which varies with the reflectance of the interface between the device and its environment, or the chemochromic membrane that covers the device.

Determination of phosphate using a highly sensitive paired emitter-detector diode photometric flow detector.

The use of a novel inexpensive photometric device, a paired emitter-detector diode (PEDD) has been applied to the colorimetric determination of phosphate using the malachite green spectrophotometric method. The novel miniaturized flow detector applied within this manifold is a highly sensitive, low cost, miniaturized light emitting diode (LED) based detector. The optical flow cell was constructed from two LEDs, whereby one is the light source and the second is the light detector, with the LED light source forward biased and the LED detector reversed biased.

Novel integrated paired emitter-detector diode (PEDD) as a miniaturized photometric detector in HPLC.

A novel low power, low cost, highly sensitive, miniaturized light emitting diode (LED) based flow detector has been used as optical detector for the detection of sample components in high performance liquid chromatography (HPLC). This colorimetric detector employs two LEDs, one operating in normal mode as a light source and the other is reverse biased to work as a light detector. Instead of measuring the photocurrent directly, a simple timer circuit is used to measure the time taken for the photocurrent generated by the emitter LED (lambda(max) 500 nm) to discharge the detector LED (lambda(max) 621 nm) from 5 V (logic 1) to 1.