Nickel-Induced Reduced Graphene Oxide Nanoribbon Formation on Highly Ordered Pyrolytic Graphite for Electronic and Magnetic Applications.

The development of nanoribbon-like structures is an effective strategy to harness the potential benefits of graphenic materials due to their excellent electrical properties, advantageous edge sites, rapid electron transport, and large specific area. Herein, parallel and connected magnetic nanostructured nanoribbons are obtained through the synthesis of reduced graphene oxide (rGO) using NiCl as a precursor with potential applications in nascent electronic and magnetic devices. Several analytical techniques have been used for the thorough characterization of the modified surfaces.

Fully automated radiolabeling of [Ga]Ga-EMP100 targeting c-MET for PET-CT clinical imaging.

Background: c-MET is a transmembrane receptor involved in many biological processes and contributes to cell proliferation and migration during cancer invasion process. Its expression is measured by immunehistochemistry on tissue biopsy in clinic, although this technique has its limitations. PET-CT could allow in vivo mapping of lesions expressing c-MET, providing whole-body detection.

Development of a 3D ultrafast laser written near-infrared spectro-interferometer.

Direct ultrafast laser photoinscription of transparent materials is a powerful technique for the development of embedded 3D photonics. This is particularly adaptable for astrophotonic devices when a number of inputs are required. The process relies essentially on volume fabrication of waveguiding structures in flexible 3D designs and refractive index contrast parameters adjustable for specific spectral ranges.

Circularly symmetric nanopores in 3D femtosecond laser nanolithography with burst control and the role of energy dose.

The fabrication of three-dimensional (3D) nanostructures within optical materials is currently a highly sought-after capability. Achieving nanoscale structuring of media within its inner volume in 3D and with free design flexibility, high accuracy and precision is a development yet to be demonstrated. In this work, a 3D laser nanolithography technique is developed which allows producing mm-long hollow nanopores inside solid-state laser crystals and with a high degree of control of pore cross-sectional aspect ratio and size.

Experimental and Numerical Validation of Whispering Gallery Resonators as Optical Temperature Sensors.

This study experimentally and numerically validates the commonly employed technique of laser-induced heating of a material in optical temperature sensing studies. Furthermore, the Er3+-doped glass microspheres studied in this work can be employed as remote optical temperature sensors. Laser-induced self-heating is a useful technique commonly employed in optical temperature sensing research when two temperature-dependent parameters can be correlated, such as in fluorescence intensity ratio vs.

[Theory of change implemented in the program to promote physical activity "La Ribera Camina"].

Objective: To develop a theory of change of a program to promote physical activity in eleven health districts, in order to improve its design and plan its evaluation.

Method: Four focus groups were carried out, to develop a participatory theory of change, to identify the expected changes (long, medium and short term) of "La Ribera Camina" program, according to the following stakeholders: primary healthcare professionals, local government representatives and community members. A thematic analysis was used to identify the actions to be taken to achieve these changes, as well as the difficulties and facilitators to enhance the sustainability of the program.

Microvasculature partial endothelial mesenchymal transition in early posttransplant biopsy with acute tubular necrosis identifies poor recovery renal allografts.

Acute tubular necrosis (ATN), a frequent histopathological feature in the early post-renal transplant biopsy, affects long-term graft function. Appropriate markers to identify patients at risk of no or incomplete recovery after delayed graft function are lacking. In this study, we first included 41 renal transplant patients whose biopsy for cause during the first month after transplantation showed ATN lesions.

KLu(WO)/SiO Tapered Waveguide Platform for Sensing Applications.

This paper provides a generic way to fabricate a high-index contrast tapered waveguide platform based on dielectric crystal bonded on glass for sensing applications. As a specific example, KLu(WO) crystal on a glass platform is made by means of a three-technique combination. The methodology used is on-chip bonding, taper cutting with an ultra-precise dicing saw machine and inductively coupled plasma-reactive ion etching (ICP-RIE) as a post-processing step.

Frailty in hemodialysis and prediction of poor short-term outcome: mortality, hospitalization and visits to hospital emergency services.

Frailty is an aging-associated state of increased vulnerability, which raises the risk of adverse outcomes. Chronic kidney disease is associated with higher prevalence of frailty. Our aim was to estimate frailty prevalence in a hemodialysis population and its influence on short-term outcomes.

Fs-laser-written thulium waveguide lasers Q-switched by graphene and MoS.

We report the generation of mid-infrared (~2 µm) high repetition rate (MHz) sub-100 ns pulses in buried thulium-doped monoclinic double tungstate crystalline waveguide lasers using two-dimensional saturable absorber materials, graphene and MoS. The waveguide (propagation losses of ~1 dB/cm) was micro-fabricated by means of ultrafast femtosecond laser writing. In the continuous-wave regime, the waveguide laser generated 247 mW at 1849.

Femtosecond-laser-written Ho:KGd(WO) waveguide laser at 2.1 μm.

We report on efficient laser operation of the first holmium monoclinic double tungstate waveguide laser fabricated by femtosecond direct laser writing. A depressed-index buried channel waveguide with a 60 μm diameter circular cladding was inscribed in 5 at.% Ho:KGd(WO).

Mapping Temperature Distribution Generated by Photothermal Conversion in Graphene Film Using Er,Yb:NaYF Nanoparticles Prepared by Microwave-Assisted Solvothermal Method.

This study analyzes the mapping of temperature distribution generated by graphene in a glass slide cover after illumination at 808 nm with a good thermal resolution. For this purpose, Er,Yb:NaYF nanoparticles prepared by a microwave-assisted solvothermal method were used as upconversion luminescent nanothermometers. By tuning the basic parameters of the synthesis procedure, such as the time and temperature of reaction and the concentration of ethanol and water, we were able to control the size and the crystalline phase of the nanoparticles, and to have the right conditions to obtain 100% of the β hexagonal phase, the most efficient spectroscopically.

Nonsmall cell lung cancer from HIV-infected patients expressed programmed cell death-ligand 1 with marked inflammatory infiltrates.

Objective: Immunotherapies targeting the programmed cell death-1 (PD-1)/PD-ligand 1 (PD-L1) checkpoint improved prognosis in lung cancer. PD-1/PD-L1 status, however, has not been investigated in human immunodeficiency virus (HIV)-positive patients. This study assessed PD-L1 status and tumor immune-cell infiltration in nonsmall cell lung cancer (NSCLC) in HIV patients.

Prevalence of Microsatellite Instability in Intraductal Papillary Mucinous Neoplasms of the Pancreas.

Microsatellite instability (MSI) caused by mismatch repair deficiency (dMMR) is detected in a small proportion of pancreatic ductal adenocarcinomas (PDACs). dMMR and MSI have been associated with responses of metastatic tumors, including PDACs, to immune checkpoint inhibitor therapy. We performed immunohistochemical analyses of a 445 PDAC specimens, collected from consecutive patients at multiple centers, to identify those with dMMR, based on loss of mismatch repair proteins MLH1, MSH2, MSH6, and/or PMS2.

Optofluidic device for the quantification of circulating tumor cells in breast cancer.

Metastatic cancer patients require a continuous monitoring during the sequential treatment cycles to carefully evaluate their disease evolution. Repetition of biopsies is very invasive and not always feasible. Herein, we design and demonstrate a 3D-flow focusing microfluidic device, where all optics are integrated into the chip, for the fluorescence quantification of CTCs in real samples.

Lepidic predominant adenocarcinoma and invasive mucinous adenocarcinoma of the lung exhibit specific mucin expression in relation with oncogenic drivers.

Objectives: To evaluate MUC1, MUC2, MUC5B, MUC5AC, and MUC6 expression in invasive lepidic predominant adenocarcinoma (LPA) and invasive mucinous adenocarcinoma (IMA) of the lung, and the impact of oncogenic drivers.

Materials And Methods: MUC1, MUC2, MUC5B, MUC5AC, MUC6, TTF1 and Hnf4α immunohistochemistry was performed on surgical samples from 52 patients with IMA (n=25) or LPA (n=27). We searched for EGFR, KRAS, BRAF, and HER2 mutations and ALK, ROS1, and NRG1 rearrangements.

Femtosecond-laser-written Tm:KLu(WO) waveguide lasers.

Depressed-index channel waveguides with a circular and photonic crystal cladding structures are prepared in a bulk monoclinic Tm:KLu(WO) crystal by 3D direct femtosecond laser writing. The channel waveguide structures are characterized and laser operation is achieved using external mirrors. In the continuous-wave mode, the maximum output power of 46 mW is achieved at 1912 nm corresponding to a slope efficiency of 15.

Low-loss 3D-laser-written mid-infrared LiNbO depressed-index cladding waveguides for both TE and TM polarizations.

We report mid-infrared LiNbO depressed-index microstructured cladding waveguides fabricated by three-dimensional laser writing showing low propagation losses (~1.5 dB/cm) at 3.68 µm wavelength for both the transverse electric and magnetic polarized modes, a feature previously unachieved due to the strong anisotropic properties of this type of laser microstructured waveguides and which is of fundamental importance for many photonic applications.

Sarcomatoid lung carcinomas show high levels of programmed death ligand-1 (PD-L1) and strong immune-cell infiltration by TCD3 cells and macrophages.

Objectives: Pulmonary sarcomatoid carcinomas (SC) are rare tumors, associated with worse prognosis and resistant to platinum-based regimens. Therapies targeting the PD-1/PD-L1 pathway are an emerging treatment for lung cancer. By characterizing intra-tumoral immune infiltration and evaluating PD-L1 expression, it could be possible to predict the efficacy of these new treatments.

Mid-infrared surface plasmon polariton chemical sensing on fiber-coupled ITO coated glass.

A novel fiber-coupled indium tin oxide (ITO) coated glass slide sensor for performing surface plasmon polariton chemical monitoring in the ∼3.5  μm mid-infrared (IR) range is reported. Efficient mid-IR fiber coupling is achieved with 3D laser written waveguides, and the coupling of glass waveguide modes to ITO surface plasmon polaritons (SPPs) is driven by the varying phase matching conditions of different aqueous analytes across the anomalous dispersion range determined by their molecular fingerprints.

Heuristic modelling of laser written mid-infrared LiNbO stressed-cladding waveguides.

Mid-infrared lithium niobate cladding waveguides have great potential in low-loss on-chip non-linear optical instruments such as mid-infrared spectrometers and frequency converters, but their three-dimensional femtosecond-laser fabrication is currently not well understood due to the complex interplay between achievable depressed index values and the stress-optic refractive index changes arising as a function of both laser fabrication parameters, and cladding arrangement. Moreover, both the stress-field anisotropy and the asymmetric shape of low-index tracks yield highly birefringent waveguides not useful for most applications where controlling and manipulating the polarization state of a light beam is crucial. To achieve true high performance devices a fundamental understanding on how these waveguides behave and how they can be ultimately optimized is required.

3D laser-written silica glass step-index high-contrast waveguides for the 3.5 μm mid-infrared range.

We report on the direct laser fabrication of step-index waveguides in fused silica substrates for operation in the 3.5 μm mid-infrared wavelength range. We demonstrate core-cladding index contrasts of 0.

Low-repetition rate femtosecond laser writing of optical waveguides in KTP crystals: analysis of anisotropic refractive index changes.

We report on the direct low-repetition rate femtosecond pulse laser microfabrication of optical waveguides in KTP crystals and the characterization of refractive index changes after the thermal annealing of the sample, with the focus on studying the potential for direct laser fabricating Mach-Zehnder optical modulators. We have fabricated square cladding waveguides by means of stacking damage tracks, and found that the refractive index decrease is large for vertically polarized light (c-axis; TM polarized) but rather weak for horizontally polarized light (a-axis; TE polarized), this leading to good near-infrared light confinement for TM modes but poor for TE modes. However, after performing a sample thermal annealing we have found that the thermal process enables a refractive index increment of around 1.