A New Life for Tionite Industrial Waste: Regeneration Strategy towards Photocatalytic Applications.

Industrial waste management is an urgent problem to solve possibly by recycling, reuse and recovery of resources. In this framework, the sludge of the TiO manufacturing, called tionite, is of certain interest because it contains metallic oxide-bearing impurities, dangerous to the environment. Hence, we propose a strategy to recover TiO from tionite, towards its effective re-use as a photocatalyst.

Morphological and structural design through hard-templating of PGM-free electrocatalysts for AEMFC applications.

This study delves into the critical role of customized materials design and synthesis methods in influencing the performance of electrocatalysts for the oxygen reduction reaction (ORR) in anion exchange membrane fuel cells (AEMFCs). It introduces a novel approach to obtain platinum-free (PGM-free) electrocatalysts based on the controlled integration of iron active sites onto the surface of silica nanoparticles (NPs) by using nitrogen-based surface ligands. These NPs are used as hard templates to form tailored nanostructured electrocatalysts with an improved iron dispersion into the carbon matrix.

The Chemistry of Chelation for Built Heritage Cleaning: The Removal of Copper and Iron Stains.

Chelators are widely used in conservation treatments to remove metal stains from marble, travertine, and limestone surfaces. In the current review the chemical aspects underlying the use of chelators for the removal of copper and iron stains from built heritage are described and clear criteria for the selection of the most efficient stain removal treatment are given. The main chelator structural features are outlined and the operating conditions for effective metal stain removal (pH, time of application, etc.

Recent Advances on Porous Siliceous Materials Derived from Waste.

In recent years, significant efforts have been made in view of a transition from a linear to a circular economy, where the value of products, materials, resources, and waste is maintained as long as possible in the economy. The re-utilization of industrial and agricultural waste into value-added products, such as nanostructured siliceous materials, has become a challenging topic as an effective strategy in waste management and a sustainable model aimed to limit the use of landfill, conserve natural resources, and reduce the use of harmful substances. In light of these considerations, nanoporous silica has attracted attention in various applications owing to the tunable pore dimensions, high specific surface areas, tailorable structure, and facile post-functionalization.

Mapping Understory Vegetation Density in Mediterranean Forests: Insights from Airborne and Terrestrial Laser Scanning Integration.

The understory is an essential ecological and structural component of forest ecosystems. The lack of efficient, accurate, and objective methods for evaluating and quantifying the spatial spread of understory characteristics over large areas is a challenge for forest planning and management, with specific regard to biodiversity and habitat governance. In this study, we used terrestrial and airborne laser scanning (TLS and ALS) data to characterize understory in a European beech and black pine forest in Italy.

On the In Vitro and In Vivo Hazard Assessment of a Novel Nanomaterial to Reduce the Use of Zinc Oxide in the Rubber Vulcanization Process.

Zinc oxide (ZnO) is the most efficient curing activator employed in the industrial rubber production. However, ZnO and Zn(II) ions are largely recognized as an environmental hazard being toxic to aquatic organisms, especially considering Zn(II) release during tire lifecycle. In this context, aiming at reducing the amount of microcrystalline ZnO, a novel activator was recently synthetized, constituted by ZnO nanoparticles (NPs) anchored to silica NPs (ZnO-NP@SiO-NP).

Synthesis and Characterization of Alkoxysilane-Bearing Photoreversible Cinnamic Side Groups: A Promising Building-Block for the Design of Multifunctional Silica Nanoparticles.

The present study reports on the synthesis of a new alkoxysilane-bearing light-responsive cinnamyl group and its application as a surface functionalization agent for the development of SiO nanoparticles (NPs) with photoreversible tails. In detail, cinnamic acid (CINN) was activated with -hydroxysuccinimide (NHS) to obtain the corresponding NHS-ester (CINN-NHS). Subsequently, the amine group of 3-aminopropyltriethoxysilane (APTES) was acylated with CINN-NHS leading to the generation of a novel organosilane, CINN-APTES, which was then exploited for decorating SiO NPs.

Photo- and radio-luminescence of porphyrin functionalized ZnO/SiO nanoparticles.

The development of hybrid nanoscintillators is hunted for the implementation of modern detection technologies, like in high energy physics, homeland security, radioactive gas sensing, and medical imaging, as well as of the established therapies in radiation oncology, such as in X-ray activated photodynamic therapy. Engineering of the physico-chemical properties of nanoparticles (NPs) enables the manufacture of hybrids in which the conjugation of inorganic/organic components leads to increased multifunctionality and performance. However, the optimization of the properties of nanoparticles in combination with the use of ionizing radiation is not trivial: a complete knowledge on the structure, composition, physico-chemical features, and scintillation property relationships in hybrid nanomaterials is pivotal for any applications exploiting X-rays.

Silica hairy nanoparticles: a promising material for self-assembling processes.

"Hairy" nanoparticles (HNPs), inorganic NPs functionalized with polymer chains, are promising building blocks for the synthesis of advanced nanocomposite (NC) materials having several technological applications. Recent evidence shows that HNPs self-organize in a variety of anisotropic structures, resulting in an improvement of the functional properties of the materials, in which are embedded. In this paper, we propose a three-step colloidal synthesis of spherical SiO-HNPs, with controlled particle morphology and surface chemistry.

Design of a Zn Single-Site Curing Activator for a More Sustainable Sulfur Cross-Link Formation in Rubber.

ZnO is a worldwide used activator for a rubber vulcanization process, which promotes fast curing kinetics and high cross-linking densities of rubber nanocomposites (NCs). However, its extended use together with leaching phenomena occurring during the production and life cycle of rubber products, especially tires, entails potential environmental risks, as ecotoxicity toward aquatic organisms. Pushed by this issue, a novel activator was developed, which introduces highly dispersed and active zinc species in the vulcanization process, reducing the amount of employed ZnO and keeping high the curing efficiency.

Tailoring the Thermal Conductivity of Rubber Nanocomposites by Inorganic Systems: Opportunities and Challenges for Their Application in Tires Formulation.

The development of effective thermally conductive rubber nanocomposites for heat management represents a tricky point for several modern technologies, ranging from electronic devices to the tire industry. Since rubber materials generally exhibit poor thermal transfer, the addition of high loadings of different carbon-based or inorganic thermally conductive fillers is mandatory to achieve satisfactory heat dissipation performance. However, this dramatically alters the mechanical behavior of the final materials, representing a real limitation to their application.

Morphology Related Defectiveness in ZnO Luminescence: From Bulk to Nano-Size.

This study addresses the relationship between material morphology (size, growth parameters and interfaces) and optical emissions in ZnO through an experimental approach, including the effect of different material dimensions from bulk to nano-size, and different excitations, from optical sources to ionizing radiation. Silica supported ZnO nanoparticles and ligand capped ZnO nanoparticles are synthesized through a sol-gel process and hot injection method, respectively. Their optical properties are investigated by radioluminescence, steady-state and time-resolved photoluminescence, and compared to those of commercial micrometric powders and of a bulk single crystal.

Evaluation of the accuracy and stress distribution of 3-unit implant supported prostheses obtained by different manufacturing methods.

The purpose of this in vitro study was to measure the vertical, positive-horizontal, and negative-horizontal misfit (VM, PHM, and NHM, respectively) of the zirconia three-element prosthetic framework, fabricated using different methods, and compare them with conventional fabrication methods (lost-wax casting). Furthermore, this study aimed to evaluate the influence of the misfit values on the biomechanical behavior of the 3-unit fixed prosthetic frameworks using three-dimensional finite element analysis (3D-FEA). Forty frameworks (n = 10) were fabricated as follow: G1, Cerec Bluecam; G2, iTero; G3, 3Series; and G4, conventional method.

Hybrid Interface in Sepiolite Rubber Nanocomposites: Role of Self-Assembled Nanostructure in Controlling Dissipative Phenomena.

Sepiolite (Sep)⁻styrene butadiene rubber (SBR) nanocomposites were prepared by using nano-sized sepiolite (NS-SepS9) fibers, obtained by applying a controlled surface acid treatment, also in the presence of a silane coupling agent (NS-SilSepS9). Sep/SBR nanocomposites were used as a model to study the influence of the modified sepiolite filler on the formation of immobilized rubber at the clay-rubber interface and the role of a self-assembled nanostructure in tuning the mechanical properties. A detailed investigation at the macro and nanoscale of such self-assembled structures was performed in terms of the organization and networking of Sep fibers in the rubber matrix, the nature of both the filler⁻filler and filler⁻rubber interactions, and the impact of these features on the reduced dissipative phenomena.

A Green Approach for Preparing High-Loaded Sepiolite/Polymer Biocomposites.

Global industry is showing a great interest in the field of sustainability owing to the increased attention for ecological safety and utilization of renewable materials. For the scientific community, the challenge lies in the identification of greener synthetic approaches for reducing the environmental impact. In this context, we propose the preparation of novel biocomposites consisting of natural rubber latex (NRL) and sepiolite (Sep) fibers through the latex compounding technique (LCT), an ecofriendly approach where the filler is directly mixed with a stable elastomer colloid.

Survival rate and load to failure of premolars restored with inlays: An evaluation of different inlay fabrication methods.

Statement Of Problem: Studies that evaluate the survival rate and load to fracture of premolars restored with inlays produced using different methods are lacking.

Purpose: The purpose of this in vitro study was to compare the survival rate and fracture load of premolars restored with inlays fabricated using different methods.

Material And Methods: Thirty maxillary premolars were selected, embedded, and prepared to receive inlays fabricated using different methods (n=10): LaCom-digital scanning with Lava C.

Prosthetically CAD-CAM-Guided Bone Augmentation of Atrophic Jaws Using Customized Titanium Mesh: Preliminary Results of an Open Prospective Study.

This study evaluated the outcomes of computer-aided design-computer-aided machining (CAD-CAM)-customized titanium mesh used for prosthetically guided bone augmentation related to the occlusion-driven implant position, to the vertical bone volume gain of the mandible and maxilla, and to complications, such as mesh exposure. Nine patients scheduled for bone augmentation of atrophic sites were treated with custom titanium mesh and particulate bone grafts with autologous bone and anorganic bovine bone in a 1:1 ratio prior to implant surgery. The bone volume needed to augment was virtually projected based on implant position, width, and length, and the mesh design was programmed for the necessary retaining screws.

Unveiling the hybrid interface in polymer nanocomposites enclosing silsesquioxanes with tunable molecular structure: Spectroscopic, thermal and mechanical properties.

Organic-inorganic nanobuilding blocks (NBBs) based on silsesquioxanes (SSQs) have potential applications as nanofillers, thermal stabilizers, and rheological modifiers, which can improve thermomechanical properties of polymer hosts. The possibility to tune both siloxane structure and pendant groups can promote compatibilization and peculiar interactions with a plethora of polymers. However, the control on SSQs molecular architecture and functionalities is usually delicate and requires careful synthetic details.

Zirconia-based versus metal-based single crowns veneered with overpressing ceramic for restoration of posterior endodontically treated teeth: 5-year results of a randomized controlled clinical study.

Objectives: The aim of this 5-year randomized controlled trial was to compare the longevity and clinical behavior of single posterior crowns made with pressable ceramic on zirconia and on metal frameworks, and if failures occur, to delineate the contributing factors.

Methods: 72 patients, who needed the covering of at least a molar and/or premolar, were included in the study. All teeth were endodontically treated, with absence of periapical lesion or active periodontitis.

Marginal Adaptation, Gap Width, and Fracture Strength of Teeth Restored With Different All-Ceramic Vs Metal Ceramic Crown Systems: An in Vitro Study.

This study evaluated marginal adaptation before and after thermomechanical (TCML) loading, gap width and fracture strength of all-ceramic single crowns, as compared to porcelain-fused-to-metal (PFM). Thirty extracted premolars were prepared with a round shoulder of 1.0 mm depth.

Short-term outcomes of mandibular reconstruction in oncological patients using a CAD/CAM prosthesis including a condyle supporting a fibular free flap.

Purpose: Condylar reconstruction and replacement using alloplastic materials currently attracts much surgical interest. The major challenge is to functionally reconstruct the anatomical region; this is crucial in terms of correct mandibular function. The goal of the present study was to evaluate the clinical outcomes of and complications experienced by a series of oncological patients who underwent computer-aided design/computer-aided manufacturing (CAD/CAM) condylar reconstruction following resection-disarticulation of the mandible.

Surgical reconstruction of maxillary defects using a computer-assisted design/computer-assisted manufacturing-produced titanium mesh supporting a free flap.

The maxilla provides support to the overlying structures and contributes significantly to the overall facial appearance and to critical functions such as mastication, speech, and deglutition. Many different techniques have been used over the years to achieve this reconstructive goal. Modern computer-assisted surgery affords new methods for planning resections, as well as optimising reconstructive outcomes and functional rehabilitation.

Effect of Lithium Disilicate Veneers of Different Thickness on the Degree of Conversion and Microhardness of a Light-Curing and a Dual-Curing Cement.

Purpose: Various materials and systems for bonding lithium disilicate to the tooth substrate are available to clinicians, who can adapt the materials to each clinical situation to maximize the performance of indirect esthetic restorations. This study aimed to evaluate the degree of conversion (DC) and the microhardness (MH) of a dual-curing and a light-curing cement under lithium disilicate discs of different thicknesses.

Materials And Methods: A total of 48 lithium disilicate (IPS e.