Micronized Recycle Rubber Particles Modified Multifunctional Polymer Composites: Application to Ultrasonic Materials Engineering.

There is a growing interest in multifunctional composites and in the identification of novel applications for recycled materials. In this work, the design and fabrication of multiple particle-loaded polymer composites, including micronized rubber from end-of-life tires, is studied. The integration of these composites as part of ultrasonic transducers can further expand the functionality of the piezoelectric material in the transducer in terms of sensitivity, bandwidth, ringing and axial resolution and help to facilitate the fabrication and use of phantoms for echography.

Preparation and Properties of Sustainable Brake Pads with Recycled End-of-Life Tire Rubber Particles.

Sustainable composite brake pads were processed by employing recycled end-of-life tire (ELT) rubber particles obtained by means of cryogenic grinding and ambient grinding. The effect of the grinding mechanism and concentration of ELT rubber particles was then reported. From the friction result test, better behavior in terms of coefficient of friction (COF) was obtained when 3% of ELT rubber particles were introduced into the composite.

The shape-memory effect in ionic elastomers: fixation through ionic interactions.

Shape-memory elastomers based on a commercial rubber cross-linked by both ionic and covalent bonds have been developed. The elastomeric matrix was a carboxylated nitrile rubber (XNBR) vulcanized with magnesium oxide (MgO) providing ionic interactions that form hierarchical structures. The so-named ionic transition is used as the unique thermal transition responsible for the shape-memory effect (SME) in these elastomers.

Simultaneous and accurate measurement of the dielectric constant at many frequencies spanning a wide range.

We present an innovative technique which allows the simultaneous measurement of the dielectric constant of a material at many frequencies, spanning a four orders of magnitude range chosen between 10(-2) Hz and 10(4) Hz. The sensitivity and accuracy are comparable to those obtained using standard single frequency techniques. The technique is based on three new and simple features: (a) the precise real time correction of the amplification of a current amplifier, (b) the specific shape of the excitation signal and its frequency spectrum, and (c) the precise synchronization between the generation of the excitation signal and the acquisition of the dielectric response signal.