Purpose: To assess the perceptions and attitudes of radiologists toward the adoption of artificial intelligence (AI) in clinical practice.
Methods: A survey was conducted among members of the SIRM Lombardy. Radiologists' attitudes were assessed comprehensively, covering satisfaction with AI-based tools, propensity for innovation, and optimism for the future.
The mechanical properties of a defect-free laser melting (PBF-LB) deposit of an AISI 316L steel alloy were assessed by means of an instrumented indentation test (IIT), at both the macro- and nano-scales. The inherent non-equilibrium microstructure of the alloy was chemically homogenous and consisted of equiaxed grains and large-elongated grains (under the optical microscope) with irregular outlines composed of a much finer internal cell structure (under the scanning electron microscope). Berkovich and Vickers indenters were used to assess the indentation properties across individual grains (nano) and over multiple grains (macro), respectively.
View Article and Find Full Text PDFFace masks can filter droplets containing viruses and bacteria minimizing the transmission and spread of respiratory pathogens but are also an indirect source of microbes transmission. A novel antibacterial and antiviral Ag-coated polypropylene surgical mask obtained through the and one-step deposition of metallic silver nanoparticles, synthesized by silver mirror reaction combined with sonication or agitation methods, is proposed in this study. SEM analysis shows Ag nanoparticles fused together in a continuous and dense layer for the coating obtained by sonication, whereas individual Ag nanoparticles around 150 nm were obtained combining the silver mirror reaction with agitation.
View Article and Find Full Text PDFBarrel cortex integrates contra- and ipsilateral whiskers' inputs. While contralateral inputs depend on the thalamocortical innervation, ipsilateral ones are thought to rely on callosal axons. These are more abundant in the barrel cortex region bordering with S2 and containing the row A-whiskers representation, the row lying nearest to the facial midline.
View Article and Find Full Text PDFPurpose: In this study we investigate how patients perceive the interaction between artificial intelligence (AI) and radiologists by designing a survey.
Method: We created a survey focused on the application of Artificial Intelligence in radiology which consisted of 20 questions distributed in three sections:Only completed questionnaires were considered for analysis.
Results: 2119 subjects completed the survey.
The microstructure and tensile behavior of two heavy section castings that had chemical compositions typical of GJS400 were investigated. Conventional metallography, fractography, and micro-Computer Tomography (μ-CT) were employed, enabling the quantification of the volume fractions of eutectic cells with degenerated Chunky Graphite (CHG), which was identified as the major defect in the castings. The Voce equation approach was exploited to evaluate the tensile behaviors of the defective castings for integrity assessment.
View Article and Find Full Text PDFThis paper presents the technical development and subsequent testing of a Real-Time Locating System based on Ultra-Wideband signals, with the aim to appraise its potential implementation in a real industrial case. The system relies on a commercial Radio Indoor Positioning System, called Qorvo MDEK1001, which makes use of UWB RF technology to determine the position of RF-tags placed on an item of interest, which in turn is located in an area covered by specific fixed antennas (anchors). Testing sessions were carried out both in an Italian laboratory and in a real industrial environment, to determine the best configurations according to some selected performance indicators.
View Article and Find Full Text PDFOne of the main issues addressed by the recent COVID-19 pandemic which affected the whole world is the availability of Personal Protective Equipment (PPE) (e.g., face masks, white coats, or disposable gloves).
View Article and Find Full Text PDFFIMEC (flat-top cylinder indenter for mechanical characterisation) is an instrumented indentation test employing a cylindrical punch. It has been used to determine the mechanical properties of metallic materials in several applications of industrial interest. This work briefly describes the technique and the theory of indentation with a flat-ended punch.
View Article and Find Full Text PDFBackground: Inadequate osteoporosis education can make patients ill-informed concerning preventive and therapeutic interventions and creates misconceptions and unnecessary concerns about the disease.
Aim: Our study aimed to assess whether patients referred to the DXA exam by their general practitioner are informed about risk factors for osteoporosis, comparing patients who received a diagnosis of osteoporosis before the exam with those without this diagnosis.
Methods: An observational single-center study was performed among patients who were referred to the DXA exam at the Osteoporosis Service of Marche Nord Hospital (Fano, Italy) between April and July 2019.
In this paper, the best laser powder bed fusion (L-PBF) printing conditions for FeSi steels with two different Si content (3.0% and 6.5%) are defined.
View Article and Find Full Text PDFThe 2030 Agenda of the United Nations includes the objective of setting up sustainable production patterns by pursuing several Sustainable Development Goals. Among them, the "Responsible production and consumption" is a key topic in the food production and is strictly connected with the "Climate action"; the crucial point, however, is how to jointly act on all these aspects and apply them in practice. The waste yearly produced in the food chain represent both an ethical, economic and environmental issue.
View Article and Find Full Text PDFBehavioral studies differentiate the rodent dorsal striatum (DS) into lateral and medial regions; however, anatomical evidence suggests that it is a unified structure. To understand striatal dynamics and basal ganglia functions, it is essential to clarify the circuitry that supports this behavioral-based segregation. Here, we show that the mouse DS is made of two non-overlapping functional circuits divided by a boundary.
View Article and Find Full Text PDFTungsten carbide-cobalt (WC-Co) composites are a class of advanced materials that have unique properties, such as wear resistance, hardness, strength, fracture-toughness and both high temperature and chemical stability. It is well known that the local indentation properties (i.e.
View Article and Find Full Text PDFDespite the great potential of Mg and its alloys as material for biodegradable implants, their low resistance to the simultaneous action of corrosion and mechanical stresses in the human body have hampered their use. Stress Corrosion Cracking has been reported as one of the most critical failure modes to overcome to allow such materials to be clinically applied. Thus, in this paper we investigate the effect of Equal Channel Angular Pressing (ECAP) on the Stress Corrosion Cracking (SCC) susceptibility of the AZ31 Mg alloy.
View Article and Find Full Text PDFElement clustering and structural features of liquid lead-bismuth eutectic (LBE) alloy have been investigated up to 720 °C by means of high temperature X-ray diffraction (HT-XRD), X-ray Photoemission Spectroscopy (XPS) and Scanning Photoemission Microscopy (SPEM) at the Elettra synchrotron in Trieste. The short-range order in liquid metal after melting corresponds to the cuboctahedral atomic arrangement and progressively evolves towards the icosahedral one as temperature increases. Such process, that involve a negative expansion of the alloy, is mainly connected to the reduction of atom distance in Pb-Pb pairs which takes place from 350 °C to 520 °C.
View Article and Find Full Text PDFThe voluntary control of movement is often tested by using the countermanding, or stop-signal task that sporadically requires the suppression of a movement in response to an incoming stop-signal. Neurophysiological recordings in monkeys engaged in the countermanding task have shown that dorsal premotor cortex (PMd) is implicated in movement control. An open question is whether and how the perceptual demands inherent the stop-signal affects inhibitory performance and their underlying neuronal correlates.
View Article and Find Full Text PDFElectron Beam (EB) welding has been used to realize seams on 2 mm-thick plates of directionally solidified (DS) IN792 superalloy. The first part of this work evidenced the importance of pre-heating the workpiece to avoid the formation of long cracks in the seam. The comparison of different pre-heating temperatures (PHT) and pass speeds () allowed the identification of optimal process parameters, namely PHT = 300 °C and = 2.
View Article and Find Full Text PDFWe investigated how the ability to suppress an impending movement is affected by the visual salience of the stop-signal in a reaching countermanding task. We found that when the stop-signal was easy to detect, stop performance was better than when the stop-signal was difficult to detect. In an exploratory analysis, we also found that the change in salience of the stop-signal can have an effect on the speed of response in trials following the stop-signal.
View Article and Find Full Text PDFThe solidification of two binary alloys, In-10Sn and Sn-13Pb, has been investigated by X-ray diffractometry (XRD) at high temperatures. The high-temperature X-ray camera, which was mounted on a diffractometer, had a sample holder suitable for molten metals and operated in a controlled Ar atmosphere. Melts were cooled down slowly and XRD spectra were recorded step by step in order to monitor the structural evolution of the liquid prior to and during solidification.
View Article and Find Full Text PDFThis paper describes the field tests on a driving simulator carried out to validate the algorithms and the correlations of dynamic parameters, specifically driving task demand and drivers' distraction, able to predict drivers' intentions. These parameters belong to the driver's model developed by AIDE (Adaptive Integrated Driver-vehicle InterfacE) European Integrated Project. Drivers' behavioural data have been collected from the simulator tests to model and validate these parameters using machine learning techniques, specifically the adaptive neuro fuzzy inference systems (ANFIS) and the artificial neural network (ANN).
View Article and Find Full Text PDFEvidence of exposure of a metal component to a small charge explosion can be detected by observing microstructural modifications; they may be present even if the piece does not show noticeable overall plastic deformations. Particularly, if an austenitic stainless steel (or another metal having a face-centered cubic structure and a low stacking fault energy) is exposed to an explosive shock wave, high-speed deformation induces primarily mechanical twinning, whereas, in nonexplosive events, a lower velocity plastic deformation first induces slip. The occurrence of mechanical twins can be detected even if the surface is damaged or oxidized in successive events.
View Article and Find Full Text PDF