Electrochemical impedance spectroscopy: from breakthroughs to functional utility in supercapacitors and batteries - a comprehensive assessment.

Electrochemical impedance spectroscopy (EIS) is a powerful technique that can be used to investigate the properties of materials, interfaces, and their redox reactions. It is applied to describe electrochemical systems and support the development of important technologies, offering a much more detailed investigation of properties than other conventional electrochemical techniques. EIS employs a modulated frequency to understand frequency-dependent electrochemical processes, thereby clarifying both fast and slow processes.

Gel Biopolymer Electrolytes Based on Saline Water and Seaweed to Support the Large-Scale Production of Sustainable Supercapacitors.

Climate change and the demand for clean energy have challenged scientists worldwide to produce/store more energy to reduce carbon emissions. This work proposes a conductive gel biopolymer electrolyte to support the sustainable development of high-power aqueous supercapacitors. The gel uses saline water and seaweed as sustainable resources.

Downplaying the role of water in the rheological changes of conducting polymers by using water-in-salt electrolytes.

Volumetric changes associated with solvent/electrolyte exchange in electronic conducting polymers (ECPs) play an important role in the mechanical stability of the polymers, as these changes are a critical factor in ECP-based energy storage devices. Thus, the present work explores the hindering of such volumetric deformations for polypyrrole films doped with dodecylbenzenesulphonate (PPy(DBS)) by employing highly concentrated aqueous electrolytes (or water-in-salt electrolytes, WiSEs), and their effects over the corresponding electrochemical capacitor cell energy retention. Electrochemical quartz crystal microbalance with dissipation monitoring measurements for thin PPy(DBS) films in the WiSEs revealed negligible dissipation changes (ΔDn ≈ 0), in contrast with those in dilute aqueous electrolyte (ΔDn ≠ 0), indicating inexpressive structural deformation of PPy(DBS) in the WiSE.

Tandem X-ray absorption spectroscopy and scattering for in situ time-resolved monitoring of gold nanoparticle mechanosynthesis.

Current time-resolved in situ approaches limit the scope of mechanochemical investigations possible. Here we develop a new, general approach to simultaneously follow the evolution of bulk atomic and electronic structure during a mechanochemical synthesis. This is achieved by coupling two complementary synchrotron-based X-ray methods: X-ray absorption spectroscopy (XAS) and X-ray diffraction.

An Overview on the Development of Electrochemical Capacitors and Batteries - Part I.

The Nobel Prize in Chemistry 2019 recognized the importance of Li-ion batteries and the revolution they allowed to happen during the past three decades. They are part of a broader class of electrochemical energy storage devices, which are employed where electrical energy is needed on demand and so, the electrochemical energy is converted into electrical energy as required by the application. This opens a variety of possibilities on the utilization of energy storage devices, beyond the well-known mobile applications, assisting on the decarbonization of energy production and distribution.

An Overview on the Development of Electrochemical Capacitors and Batteries - part II.

In the second part of the review on electrochemical energy storage, the devolvement of batteries is explored. First, fundamental aspects of battery operation will be given, then, different materials and chemistry of rechargeable batteries will be explored, including each component of the cell. In negative electrodes, metallic, intercalation and transformation materials will be addressed.

Electrochemical quartz crystal microbalance with dissipation investigation of fibronectin adsorption dynamics driven by electrical stimulation onto a conducting and partially biodegradable copolymer.

Functional surface coatings are a key option for biomedical applications, from polymeric supports for tissue engineering to smart matrices for controlled drug delivery. Therefore, the synthesis of new materials for biological applications and developments is promising. Hence, biocompatible and stimuli-responsive polymers are interesting materials, especially when they present conductive properties.

Kinetics, Assembling, and Conformation Control of L-Cysteine Adsorption on Pt Investigated by in situ FTIR Spectroscopy and QCM-D.

A quartz crystal microbalance method with dissipation (QCM-D) and attenuated total reflection Fourier-transform infrared (ATR-FTIRS) spectroscopy were used to study the adsorption of L-cysteine (L-Cys) on Pt. Through QCM-D, it was possible to verify that the viscoelastic properties of the adsorbed species play an important role in the adsorption, rendering Sauerbrey's equation inapplicable. The modelling of QCM-D data exposed two different processes for the adsorption reaction.

Improved Performance of Ionic Liquid Supercapacitors by using Tetracyanoborate Anions.

Supercapacitors are energy storage devices designed to operate at higher power densities than conventional batteries, but their energy density is still too low for many applications. Efforts are made to design new electrolytes with wider electrochemical windows than aqueous or conventional organic electrolytes in order to increase energy density. Ionic liquids (ILs) with wide electrochemical stability windows are excellent candidates to be employed as supercapacitor electrolytes.

Ionic liquids containing tricyanomethanide anions: physicochemical characterisation and performance as electrochemical double-layer capacitor electrolytes.

We investigated the use of fluorine free ionic liquids (ILs) containing the tricyanomethanide anion ([C(CN)]) as an electrolyte in electrochemical double-layer capacitors (EDLCs). Three cations were used; 1-butyl-3-methylimidazolium ([Im]), N-butyl-N-methylpyrrolidinium ([Pyr]) and N-butyl-N-methylpiperidinium ([Pip]). Their physicochemical properties are discussed alongside with their performance as electrolytes.

Piezoelectric immunochip coated with thin films of bacterial cellulose nanocrystals for dengue detection.

Low-cost piezoelectric devices, such as simple frequency monitoring quartz crystal microbalance (QCM) devices, have good clinical utility as fast diagnostic tools for the detection of several diseases. However, unspecific antigen recognition, poor molecular probe adsorption and the need for sample dilution are still common drawbacks that hinder their use in routine diagnosis. In this work, piezoelectric sensors were previously coated with thin films of bacterial cellulose nanocrystals (CN) to provide a more sensitive and adapted interface for the attachment of monoclonal immunoglobulin G (IgGNS1) and to favor specific detection of non-structural protein 1 (NS1) of dengue fever.

Two phosphonium ionic liquids with high Li(+) transport number.

This work presents the physicochemical characterization of two ionic liquids (ILs) with small phosphonium cations, triethylpenthylphosphonium bis(trifluoromethanesulfonyl)imide ([P2225][Tf2N]) and (2-methoxyethyl)trimethylphosphonium bis(trifluoromethanesulfonyl)imide ([P222(201)][Tf2N]), and their mixtures with Li(+). Properties such as the electrochemical window, density, viscosity and ionic conductivity are presented. The diffusion coefficient was obtained using two different techniques, PGSE-NMR and Li electrodeposition with microelectrodes.

Physicochemical properties of three ionic liquids containing a tetracyanoborate anion and their lithium salt mixtures.

Given their relevant physicochemical properties, ionic liquids (ILs) are attracting great attention as electrolytes for use in different electrochemical devices, such as capacitors, sensors, and lithium ion batteries. In addition to the advantages of using ILs containing lithium cations as electrolytes in lithium ion batteries, the Li(+) transport in ILs containing the most common anion, bis(trifluoromethanesulfonyl) imide anion ([Tf2N]), is reportedly small; therefore, its contribution to the overall conductivity is also low. In this work, we describe the preparation and characterization of two new and one known IL containing the tetracyanoborate anion ([B(CN)4]) as the anionic species.

Ether-Bond-Containing Ionic Liquids as Supercapacitor Electrolytes.

Electrochemical capacitors (ECs) are electrical energy storage devices that have the potential to be very useful in a wide range of applications, especially where there is a large disparity between peak and average power demands. The use of ionic liquids (ILs) as electrolytes in ECs can increase the energy density of devices; however, the viscosity and conductivity of ILs adversely influence the power density of the device. We present experimental results where several ILs containing different cations have been employed as the electrolyte in cells containing mesoporous carbon electrodes.

Probing the local environment of hybrid materials designed from ionic liquids and synthetic clay by Raman spectroscopy.

Hybrid organic-inorganic material containing Laponite clay and ionic liquids forming cations have been prepared and characterized by FT-Raman spectroscopy, X-ray diffraction, and thermal analysis. The effect of varying the length of the alkyl side chain and conformations of cations has been investigated by using different ionic liquids based on piperidinium and imidazolium cations. The structure of the N,N-butyl-methyl-piperidinium cation and the assignment of its vibrational spectrum have been further elucidated by quantum chemistry calculations.

Rheological changes and kinetics of water uptake by poly(ionic liquid)-based thin films.

Water uptake by thin films composed of the poly(ionic liquid) poly[diallyldimethylammonium bis(trifluoromethanesulfonyl)imide] (PDDATf2N) and the ionic liquid N,N-butylmethylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr1.4Tf2N) was studied with a quartz crystal microbalance with dissipation. The data obtained for films with different compositions during the passage of dry and wet N2 flow through the films were simulated with the Kevin-Voigt viscoelastic model for assessment of the mass of uptake water as well as the viscoelastic parameters.

Ni(ii)-modified solid substrates as a platform to adsorb His-tag proteins.

This work investigated a simple and versatile modification to a solid substrate to develop electrochemical bio-recognition platforms based on bio-affinity interactions between histidine (His)-tagged proteins and Ni(ii) surface sites. Carboxylate (COO)-functionalized substrates were prepared in multiple steps, initiated with an amino-terminated self-assembled monolayer (SAM) on polycrystalline gold. Surface enhanced Raman spectroscopy (SERS), quartz crystal microbalance with dissipation monitoring (QCM-D) and contact angle measurements were used to follow the modification process.

Influence of the water content on the structure and physicochemical properties of an ionic liquid and its Li+ mixture.

The effect of water on the hydrophobic ionic liquid (IL) 1-n-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonylimide) and its Li(+) mixture was evaluated. The electrochemical stability, density, viscosity, and ionic conductivity were measured for both systems in different concentrations of water. The presence of Li(+) causes a large increase in the water absorption ability of the IL.

Electrochromic properties of a metallo-supramolecular polymer derived from tetra(2-pyridyl-1,4-pyrazine) ligands integrated in thin multilayer films.

The electrochromic behavior of iron complexes derived from tetra-2-pyridyl-1,4-pyrazine (TPPZ) and a hexacyanoferrate species in polyelectrolytic multilayer adsorbed films is described for the first time. This complex macromolecule was deposited onto indium-tin oxide (ITO) substrates via self-assembly, and the morphology of the modified electrodes was studied using atomic force microscopy (AFM), which indicated that the hybrid film containing the polyelectrolyte multilayer and the iron complex was highly homogeneous and was approximately 50 nm thick. The modified electrodes exhibited excellent electrochromic behavior with both intense and persistent coloration as well as a chromatic contrast of approximately 70%.

Effect of SO2 on the transport properties of an imidazolium ionic liquid and its lithium solution.

Transport coefficients have been measured as a function of the concentration of sulfur dioxide, SO(2), dissolved in 1-butyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, [BMMI][Tf(2)N], as well as in its lithium salt solution, Li[Tf(2)N]. The SO(2) reduces viscosity and density and increases conductivity and diffusion coefficients in both the neat [BMMI][Tf(2)N] and the [BMMI][Tf(2)N]-Li[Tf(2)N] solution. The conductivity enhancement is not assigned to a simple viscosity effect; the weakening of ionic interactions upon SO(2) addition also plays a role.

Ether-bond-containing ionic liquids and the relevance of the ether bond position to transport properties.

The ionic liquids (ILs) 1-ethoxyethyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide, [EtO(CH(2))(2)MMI][Tf(2)N], and N-(ethoxyethyl)-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide, [EtO(CH(2))(2)MMor][Tf(2)N] were synthesized, and relevant properties, such as thermal stability, density, viscosity, electrochemical behavior, ionic conductivity, and self-diffusion coefficients for both ionic species, were measured and compared with those of their alkyl counterparts, 1-n-butyl-2,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide, [BMMI][Tf(2)N], and N-n-butyl-N-methylpiperidinium bis(trifluoromethanesulfonyl)imide, [BMP][Tf(2)N] and N-n-butyl-N-methylmorpholinium bis(trifluoromethanesulfonyl)imide [BMMor][Tf(2)N]. This comparison was done to evaluate the effects caused by the presence of the ether bond in either the side chain or in the organic cation ring. The salt, LiTf(2)N, was added to the systems to estimate IL behavior with regard to lithium cation transport.

Electrostatic and hydrophobic interactions involved in CNT biofunctionalization with short ss-DNA.

This work is aimed at studying the adsorption mechanism of short chain 20-mer pyrimidinic homo-ss-DNA (oligodeoxyribonucleotide, ODN: polyC(20) and polyT(20)) onto CNT by reflectometry. To analyze the experimental data, the effective-medium theory using the Bruggemann approximation represents a suitable optical model to account for the surface properties (roughness, thickness and optical constants) and the size of the adsorbate. Systematic information about the involved interactions is obtained by changing the physico-chemical properties of the system.

Chemical modification of a nanocrystalline TiO2 film for efficient electric connection of glucose oxidase.

A novel biosensor for glucose was prepared by adsorption of 1,1'-bis(4-carboxybenzyl)-4,4'-bipyridinium di-bromide compound (H(2)BpybcBr(2)) onto the surface of a nanocrystalline TiO(2) film deposited onto FTO glasses, which was used as a platform to assemble the enzyme glucose oxidase to the electrode surface. The H(2)BpybcBr(2)/TiO(2)/FTO modified electrode was characterized by scanning electron microscopy, X-ray fluorescence image, cyclic voltammograms and spectroelectrochemical measurements. The immobilization of GOD on functionalized TiO(2) film led to stable amperometric biosensing for glucose with a linear range from 153 micromol L(-1) to 1.

V2O5 nanoparticles obtained from a synthetic bariandite-like vanadium oxide: synthesis, characterization and electrochemical behavior in an ionic liquid.

Highly stable and crystalline V(2)O(5) nanoparticles with an average diameter of 15 nm have been easily prepared by thermal treatment of a bariandite-like vanadium oxide, V(10)O(24) x 9 H(2)O. Their characterization was carried out by powder X-ray diffractometry (XRD), Fourier transform infrared (FT-IR) and Raman spectroscopies, and transmission electron microscopy (TEM). The fibrous and nanostructured film obtained by electrophoretic deposition of the V(2)O(5) nanoparticles showed good electroactivity when submitted to cyclic voltammetry in an ionic liquid-based electrolyte.