Multicenter Cross-Sectional Study of Oral Health and Hygiene Practices Among Pregnant Women.

: Hormonal, vascular, and behavioral changes during pregnancy can negatively impact a woman's oral health, resulting in conditions such as gingivitis, dental sensitivity, and caries. Although oral health is critical during pregnancy, it remains frequently overlooked. In this study, the oral health status and hygiene practices of pregnant women attending two university hospitals in southern Italy were evaluated.

Augmented Reality in Dentistry: Enhancing Precision in Clinical Procedures-A Systematic Review.

Augmented reality (AR) enhances sensory perception by adding extra information, improving anatomical localization and simplifying treatment views. In dentistry, digital planning on bidimensional screens lacks real-time feedback, leading to potential errors. However, it is not clear if AR can improve the clinical treatment precision.

Customized 3D-Printed Mesh, Membrane, Bone Substitute, and Dental Implant Applied to Guided Bone Regeneration in Oral Implantology: A Narrative Review.

The new frontiers of computer-based surgery, technology, and material advances, have allowed for customized 3D printed manufacturing to become widespread in guided bone regeneration (GBR) in oral implantology. The shape, structural, mechanical, and biological manufacturing characteristics achieved through 3D printing technologies allow for the customization of implant-prosthetic rehabilitations and GBR procedures according to patient-specific needs, reducing complications and surgery time. Therefore, the present narrative review aims to elucidate the 3D-printing digital radiographic process, materials, indications, 3D printed manufacturing-controlled characteristics, histological findings, complications, patient-reported outcomes, and short- and long-term clinical considerations of customized 3D printed mesh, membranes, bone substitutes, and dental implants applied to GBR in oral implantology.

Dental plaque quantitation by light induced fluorescence technology in exclusive Electronic Nicotine Delivery Systems (ENDS) users.

Objectives: In comparison to conventional combustible cigarettes, Electronic Nicotine Delivery Systems (ENDS) including both e-cigarettes (ECs) and heated tobacco products (HTPs) significantly reduce exposure to toxic chemical emissions. However, their impact on dental plaque remains unclear. This study measures dental plaque in ENDS (ECs and HTPs) users using quantitative light-induced fluorescence (QLF) technology, comparing them with current, former, and never smokers.

The Use of Statins as an Adjunctive Periodontal Disease Treatment: Systematic Review and Meta-Analysis.

Background: the purpose of this systematic review was to assess the clinical and radiographic effect of subgingival-administered statins as an adjunct periodontal treatment in patients with periodontitis.

Methods: Electronic literature searches in Medline/PubMed and the Cochrane Library were conducted to identify all relevant articles. Eligibility was based on inclusion criteria which included Randomized Controlled Trials (RCTs) published after 2010, where the periodontal variables were assessed before and after periodontal treatment in combination with a statin administration.

Comparison of smoking traditional, heat not burn and electronic cigarettes on salivary cytokine, chemokine and growth factor profile in healthy young adults-pilot study.

Smoking is the cause of numerous oral pathologies. The aim of the study was to evaluate the effect of smoking traditional cigarettes, e-cigarettes, and heat-not-burn products on the content of salivary cytokines, chemokines, and growth factors in healthy young adults. Three groups of twenty-five smokers each as well as a control group matched in terms of age, gender, and oral status were enrolled in the study.

Impact of Smoking on Salivary Lipid Profile and Oxidative Stress in Young Adults: A Comparative Analysis between Traditional Cigarettes, E-Cigarettes, and Heat-Not-Burn Products.

BACKGROUND Smoking nicotine is considered to be one of the most harmful addictions, leading to the development of a number of health complications, including many pathologies in the oral cavity. The aim of this study was to examine the effect of smoking traditional cigarettes, e-cigarettes, and heat-not-burn products on profiles of salivary lipids and lipid peroxidation products in the unstimulated and stimulated saliva of healthy young adults with a smoking habit of up to 3 years. MATERIAL AND METHODS We enrolled 3 groups of 25 smoking patients each and a control group matched for age, gender, and oral status.

Food Selectivity in Children with Autism Spectrum Disorder: A Statistical Analysis in Southern Italy.

This paper focuses on autism spectrum disorder (ASD) and food selectivity, both of which are prevalent in the pediatric population. In this context, the authors paid attention to food selectivity and its possible correlation with the atypicality of sensory processes, outlining the useful rehabilitation treatments to draw on. This research included the parents or caregivers of pediatric patients diagnosed with autism spectrum disorder and placed within a therapeutic clinic.

Mitochondrial Redox Balance of Fibroblasts Exposed to Ti-6Al-4V Microplates Subjected to Different Types of Anodizing.

Despite the high biocompatibility of titanium and its alloys, the need to remove titanium implants is increasingly being debated due to the potential for adverse effects associated with long-term retention. Therefore, new solutions are being sought to enhance the biocompatibility of titanium implants. One of them is to increase the thickness of the passive layer of the implant made of titanium dioxide.

The "Dedicated" C.B.C.T. in Dentistry.

This position statement represents a consensus of an expert committee composed by the Italian Academy of General Dentistry (Accademia Italiana Odontoiatria Generale COI-AIOG) and Italian Academy of Legal and Forensic Dentistry (Accademia Italiana di Odontoiatria Legale e Forense OL-F) on the appropriate use of cone beam computed tomography (C.B.C.

Characterization of the Oral Microbiome in Wearers of Fixed and Removable Implant or Non-Implant-Supported Prostheses in Healthy and Pathological Oral Conditions: A Narrative Review.

Oral commensal microorganisms perform very important functions such as contributing to the health of the host. However, the oral microbiota also plays an important role in the pathogenesis and development of various oral and systemic diseases. The oral microbiome may be characterized by a higher prevalence of some microorganisms than others in subjects with removable or fixed prostheses, depending on oral health conditions, the prosthetic materials used, and any pathological conditions brought about by inadequate prosthetic manufacturing or poor oral hygiene.

Long-Term Chromatic Durability of White Spot Lesions through Employment of Infiltration Resin Treatment.

: White spot lesions (WSLs) denote regions of subsurface demineralization on the enamel that manifest as opaque and milky-white regions. Treatment for WSLs is essential for both clinical and aesthetic reasons. Resin infiltration has been identified as the most efficacious solution for alleviating WSLs, but studies with long-term monitoring are scarce.

Pharmacological Aspects and Biological Effects of Cannabigerol and Its Synthetic Derivatives.

Cannabigerol (CBG) is a cannabinoid from the plant that lacks psychotomimetic effects. Its precursor is the acidic form, cannabigerolic acid (CBGA), which is, in turn, a biosynthetic precursor of the compounds cannabidiol (CBD) and Δ9-tetrahydrocannabinol (THC). CBGA decarboxylation leads to the formation of neutral cannabinoid CBG, through a chemical reaction catalyzed by heat.

Oral Lesions Following Anti-SARS-CoV-2 Vaccination: A Systematic Review.

Increasing evidence relate anti-SARS-CoV-2 vaccinations to orofacial adverse reactions, therefore, the present systematic review aimed to evaluate primary oral lesions diagnosed in adult subjects, following the WHO Emergency Use Listing approved and EMA authorized vaccines, also in relation to cases' age, gender, comorbidities, and history of COVID-19, and in relation to vaccine type and doses. The study protocol, registered on PROSPERO (CRD42022339032) and compliant with the PRISMA statement, included an electronic search across Scopus, MEDLINE/PubMed, BioMed Central databases, and PROSPERO, ended on 18 June 2022 and succeeded by a manual search, an independent data extraction, and arisk of bias evaluation through ROBINS-I tool. Qualitatively synthesized data from the 13studies included showed an overall low prevalence (16 cases), though higher in females (68.

Attitudes towards Antibiotic Prescription and Antimicrobial Resistance Awareness among Italian Dentists: What Are the Milestones?

Antimicrobial resistance is a growing phenomenon, often associated with the improper prescription of antibiotics, prescribed by those who do not follow the guidelines for antibiotic stewardship. The aim of this study was to evaluate the current attitude towards antibiotic prescribing and antimicrobial resistance awareness among Italian dentists. An online questionnaire was distributed to Italian dentists from September to December 2021.

Stress Distribution Pattern in Zygomatic Implants Supporting Different Superstructure Materials.

The aim of this study was to assess and compare the stress-strain pattern of zygomatic dental implants supporting different superstructures using 3D finite element analysis (FEA). A model of a tridimensional edentulous maxilla with four dental implants was designed using the computer-aided design (CAD) software. Two standard and two zygomatic implants were positioned to support the U-shaped bar superstructure.

Minimally Invasive Repair of Recurrent Inguinal Hernia: Multi-Institutional Retrospective Comparison of Robotic Versus Laparoscopic Surgery.

Inguinal hernia repair is one of the most commonly performed surgical procedures in general surgery. Despite surgical advances, recurrence and chronic pain are still major issues after this intervention. Aim of our study was to retrospectively assess and compare outcomes of robotic versus laparoscopic repair of recurrent inguinal hernia.

Does Low-Taper Root Canal Shaping Decrease the Risk of Root Fracture? A Systematic Review.

Minimal root-canal preparation has been suggested to reduce the risk of root fracture, but as a result, satisfactory cleaning and shaping do not take place. Large-scale taper instrumentation can contribute to removing infected tissue; however, it may weaken the tooth structure. The aim of this systematic review is to evaluate whether root-canal shaping with low-taper instruments decreases the risk of root fracture, compared to high-conicity shaping.

Root Canal Cleaning after Different Irrigation Techniques: An Ex Vivo Analysis.

: The endodontic space is a complex area on both micro and macro levels; therefore, traditional irrigation techniques may not guarantee a complete cleaning of such a complicated tridimensional system. The presented ex vivo study aimed to evaluate root canal cleanliness, obtained through an equal volume of traditionally applied sodium hypochlorite (NaOCl), compared to ultrasonically activated NaOCl and ultrasonically activated NaOCl that had undergone intracanal heating NaOCl. : A total of 60 freshly extracted human mandibular premolars underwent root sample length standardization (18 mm), root canal preparation and, based on the irrigation method employed, were randomly and equally assigned to three study groups, composed of root samples treated with ultrasonically activated NaOCl, ultrasonically activated NaOCl that had undergone intracanal heating and traditionally applied NaOCl.

The Use of Bulk Fill Resin-Based Composite in the Sealing of Cavity with Margins in Radicular Cementum.

The aim of this systematic review was to evaluate if the newly introduced bulk fill resin-based composite provides a better marginal sealing in cavity preparations with margins in dental cementum. The population investigation comparison outcome (PICO) framework was: in cavity preparation with margins in dental cementum of human extracted teeth, do bulk fill resin base composites provide a better marginal sealing than non-bulk fill resin-based composites? We performed our research on April 21, 2020. Two authors independently evaluated the abstract and titles for eligibility criteria.

Systematic Review on White Spot Lesions Treatments.

The difference in refractive index between the healthy enamel and the demineralized area generates a lesion with a milky white opaque appearance, clearly distinguishable from the surrounding healthy enamel. The aim of this systematic review was to evaluate if the infiltration technique is the most efficient treatment to resolve a white spot lesion when compared with remineralization and microabrasion techniques. The Population/Intervention/Comparison/Outcome question investigated: "in enamel WS lesion, the infiltration treatment compared to remineralization or microabrasion treatments is more or less effective in the camouflage effect?.

COVID-19 and the Impact on the Cranio-Oro-Facial Trauma Care in Italy: An Epidemiological Retrospective Cohort Study.

Unlabelled: The coronavirus disease 2019 (COVID-19) has deeply modified the organization of hospitals, health care centers, and the patient's behavior. The aim of this epidemiological retrospective cohort study is to evaluate if and how the COVID-19 pandemic has determined a modification in cranio-oro-facial traumatology service.

Methods: The dataset included hospital emergency room access of a six-month pre-pandemic period and six months into pandemic outbreak.

Expression Profile of Stemness Markers CD138, Nestin and Alpha-SMA in Ameloblastic Tumours.

Ameloblastic carcinoma is a rare malignant odontogenic neoplasm with a poor prognosis. It can arise de novo or from a pre-existing ameloblastoma. Research into stemness marker expression in ameloblastic tumours is lacking.

Lithium Disilicate Ceramic Endocrown Biomechanical Response According to Different Pulp Chamber Extension Angles and Filling Materials.

The purpose of this study is to evaluate the effect of pulp chamber extension angles and filling material mechanical properties on the biomechanical response of a ceramic endocrown. A 3D model of maxillary molar that underwent endodontically treatment was exported to computer aided design software to conduct finite element analysis (FEA). The endocrown model was modified considering different pulp chamber extension angles (right angle; 6°, 12° and 18° of axial divergence).