Measurement of drinking water contaminants by solid phase microextraction initially quantified in source water samples by the USGS.

Two adsorbent solid phase microextraction (SPME) fibers, 70 microm Carbowax divinylbenzene (CW/DVB) and 65 microm polydimethylsiloxane divinylbenzene (PDMS/DVB), were selected for the analysis of several target analytes (phenols, phosphates, phthalates, polycyclic aromatic hydrocarbons, and chlorinated pesticides) identified by the USGS in surface waters. Detection limits for standards ranged from 0.1 to 1 ng/mL for the CW/ DVB fiber and 0.

Potential sources of background contaminants in solid phase extraction and microextraction.

A study to identify the sources of background contamination from SPE, using a C-18 sorbent, and solid-phase microextraction (SPME), using a 70 microm carbowax/divinylbenzene (CW/DVB) fiber, was carried out. To determine the source of contamination, each material used in the procedure was isolated and examined for their contribution. The solid-phase column components examined were: sorbent material and frits, column housings and each solvent used to elute analytes off the column.

Persistence of pharmaceuticals and other organic compounds in chlorinated drinking water as a function of time.

Ninety eight pharmaceuticals and other organic compounds (POOCs) that were amended to samples of chlorinated drinking-water were extracted and analyzed 1, 3, 6, 8, and 10 days after amendment to determine whether the total chlorine residual reacted with the amended POOCs in drinking water in a time frame similar to the residence time of drinking water in a water distribution system. Results indicated that if all 98 were present in the finished drinking water from a drinking-water treatment plant using free chlorine at 1.2 mg/L as the distribution system disinfectant residual, 52 POOCs would be present in the drinking water after 10 days at approximately the same concentration as in the newly finished drinking water.