Dye-Sensitized Nonstoichiometric Strontium Titanate Core-Shell Photocathodes for Photoelectrosynthesis Applications.

A core-shell approach that utilizes a high-surface-area conducting core and an outer semiconductor shell is exploited here to prepare p-type dye-sensitized solar energy cells that operate with a minimal applied bias. Photocathodes were prepared by coating thin films of nanocrystalline indium tin oxide with a 0.8 nm AlO seeding layer, followed by the chemical growth of nonstoichiometric strontium titanate.

Chromophore-Catalyst Assembly for Water Oxidation Prepared by Atomic Layer Deposition.

Visible-light-driven water splitting was investigated in a dye sensitized photoelectrosynthesis cell (DSPEC) based on a photoanode with a phosphonic acid-derivatized donor-π-acceptor (D-π-A) organic chromophore, 1, and the water oxidation catalyst [Ru(bda)(4-O(CH)P(OH)-pyr)], 2, (pyr = pyridine; bda = 2,2'-bipyridine-6,6'-dicarboxylate). The photoanode was prepared by using a layering strategy beginning with the organic dye anchored to an FTO|core/shell electrode, atomic layer deposition (ALD) of a thin layer (<1 nm) of TiO, and catalyst binding through phosphonate linkage to the TiO layer. Device performance was evaluated by photocurrent measurements for core/shell photoanodes, with either SnO or nanoITO core materials, in acetate-buffered, aqueous solutions at pH 4.

Enabling Efficient Creation of Long-Lived Charge-Separation on Dye-Sensitized NiO Photocathodes.

The hole-injection and recombination photophysics for NiO sensitized with RuP ([Ru(bpy)(4,4'-(POH)-bpy)]) are explored. Ultrafast transient absorption (TA) measurements performed with an external electrochemical bias reveal the efficiency for productive hole-injection, that is, quenching of the dye excited state that results in a detectable charge-separated electron-hole pair, is linearly dependent on the electronic occupation of intragap states in the NiO film. Population of these states via a negative applied potential increases the efficiency from 0% to 100%.

Bioreactor Scalability: Laboratory-Scale Bioreactor Design Influences Performance, Ecology, and Community Physiology in Expanded Granular Sludge Bed Bioreactors.

Studies investigating the feasibility of new, or improved, biotechnologies, such as wastewater treatment digesters, inevitably start with laboratory-scale trials. However, it is rarely determined whether laboratory-scale results reflect full-scale performance or microbial ecology. The Expanded Granular Sludge Bed (EGSB) bioreactor, which is a high-rate anaerobic digester configuration, was used as a model to address that knowledge gap in this study.

Role of Macromolecular Structure in the Ultrafast Energy and Electron Transfer Dynamics of a Light-Harvesting Polymer.

Ultrafast energy and electron transfer (EnT and ET, respectively) are characterized in a light-harvesting assembly based on a π-conjugated polymer (poly(fluorene)) functionalized with broadly absorbing pendant organic isoindigo (iI) chromophores using a combination of femtosecond transient absorption spectroscopy and large-scale computer simulation. Photoexcitation of the π-conjugated polymer leads to near-unity quenching of the excitation through a combination of EnT and ET to the iI pendants. The excited pendants formed by EnT rapidly relax within 30 ps, whereas recombination of the charge-separated state formed following ET occurs within 1200 ps.

Growth and Post-Deposition Treatments of SrTiO3 Films for Dye-Sensitized Photoelectrosynthesis Cell Applications.

Sensitized SrTiO3 films were evaluated as potential photoanodes for dye-sensitized photoelectrosynthesis cells (DSPECs). The SrTiO3 films were grown via pulsed laser deposition (PLD) on a transparent conducting oxide (fluorine-doped tin oxide, FTO) substrate, annealed, and then loaded with zinc(II) 5,10,15-tris(mesityl)-20-[(dihydroxyphosphoryl)phenyl] porphyrin (MPZnP). When paired with a platinum wire counter electrode and an Ag/AgCl reference electrode these sensitized films exhibited photocurrent densities on the order of 350 nA/cm(2) under 0 V applied bias conditions versus a normal hydrogen electrode (NHE) and 75 mW/cm(2) illumination at a wavelength of 445 nm.

Disentangling the Physical Processes Responsible for the Kinetic Complexity in Interfacial Electron Transfer of Excited Ru(II) Polypyridyl Dyes on TiO2.

Interfacial electron transfer at titanium dioxide (TiO2) is investigated for a series of surface bound ruthenium-polypyridyl dyes whose metal-to-ligand charge-transfer state (MLCT) energetics are tuned through chemical modification. The 12 complexes are of the form Ru(II)(bpy-A)(L)2(2+), where bpy-A is a bipyridine ligand functionalized with phosphonate groups for surface attachment to TiO2. Functionalization of ancillary bipyridine ligands (L) enables the potential of the excited state Ru(III/)* couple, E(+/)*, in 0.

Singlet Fission: From Coherences to Kinetics.

Singlet fission, in which an initially excited singlet state spontaneously splits into a pair of triplet excitons, is a process that can potentially boost the efficiency of solar energy conversion. The separate electronic bands in organic semiconductors make them especially useful for dividing a high-energy singlet exciton into a pair of lower-energy triplet excitons. Recent experiments illustrate the role of spin coherence in fission, while kinetic models are used to describe how triplet and singlet states interact on longer time scales.

Different rates of singlet fission in monoclinic versus orthorhombic crystal forms of diphenylhexatriene.

The dynamics of singlet fission (SF) are studied in monoclinic and orthorhombic crystals of 1,6-diphenyl-1,3,5-hexatriene. Picosecond time-resolved fluorescence measurements and the presence of a strong magnetic field effect indicate that up to 90% of the initially excited singlets undergo SF in both forms. The initial SF and subsequent triplet pair dissociation rates are found to be more rapid in the monoclinic crystal by factors of 1.

Correlating the excited state relaxation dynamics as measured by photoluminescence and transient absorption with the photocatalytic activity of Au@TiO2 core-shell nanostructures.

The spectroscopic and photocatalytic properties of a series of Au@TiO(2) core-shell nanostructures are characterized. The crystallinity of the TiO(2) shells was varied by changing the etching and calcination conditions. Measurements of the photoluminescence, transient absorption, and H(2) production rate permit us to look for correlations between the spectroscopic and catalytic behaviors.

Time-resolved studies of charge recombination in the pyrene/TCNQ charge-transfer crystal: evidence for tunneling.

Previous studies of solid-state tetracyanobenzene-based donor-acceptor complexes showed that these materials were highly susceptible to both laser and mechanical damage that complicated the analysis of their electron-transfer kinetics. In this paper, we characterize the optical properties of a pyrene/tetracyanoquinodimethane charge-transfer crystal that is much more robust than the tetracyanobenzene compounds. This donor-acceptor complex has a charge-transfer absorption that extends into the near-infrared, rendering the crystal black.

The effects of photochemical and mechanical damage on the excited state dynamics of charge-transfer molecular crystals composed of tetracyanobenzene and aromatic donor molecules.

Charge-transfer molecular crystals are structurally well-defined systems whose electron transfer dynamics can be studied using time-resolved spectroscopy. In this paper, five 1:1 complexes, consisting of 1,2,4,5-tetracyanobenzene as the electron acceptor and durene, 9-methylanthracene, naphthalene, phenanthrene, and pyrene as electron donors, are studied using time-resolved fluorescence and transient absorption in the diffuse reflectance geometry. Two different sample morphologies were studied: single crystals and powders prepared by pulverizing the crystals and diluting them with barium sulfate microparticles.

Electronic energy migration on different time scales: concentration dependence of the time-resolved anisotropy and fluorescence quenching of Lumogen Red in poly(methyl methacrylate).

Electronic energy transfer plays an important role in many types of organic electronic devices. Forster-type theories of exciton diffusion provide a way to calculate diffusion constants and lengths, but their applicability to amorphous polymer systems must be evaluated. In this paper, the perylenediimide dye Lumogen Red in a poly(methyl methacrylate) host matrix is used to test theories of exciton motion over Lumogen Red concentrations (C(LR)'s) ranging from 1 x 10(-4) to 5 x 10(-2) M.

Template assisted synthesis of silica-coated molecular crystal nanorods: From hydrophobic to hydrophilic nanorods.

We report a method for the preparation of silica-coated molecular crystal nanorods. A sol-gel method was used to make silica nanotubes inside anodized alumina templates. The nanotubes were then loaded with 9-anthracene carboxylic acid (9-AC) and solvent annealed to produce silica-coated organic nanorods.