Halide Perovskite Photodiode Integrated CMOS Imager.

Thin film photodiodes (TFPD) can supplement complementary metal-oxide-semiconductor (CMOS) image sensor vision by their exotic optoelectronic properties assisted by their monolithic processability. Halide perovskites are known to show outstanding optoelectronic properties, such as large absorption coefficient, long carrier diffusion lengths, and high carrier mobility, leading to high external quantum efficiency (EQE) and fast charge transport in photodiodes (PDs), especially compared with other thin-film photodiode candidates. In this paper, high-resolution two-dimensional (2D) and three-dimensional (3D) imaging capabilities are demonstrated using perovskite photodetection material with a silicon (Si) read-out integrated circuit (ROIC).

In Situ Annealing Effect on Thermally Co-Evaporated CsPbIBr Thin Films Studied via Spectroscopic Ellipsometry.

All-inorganic cesium lead halide perovskites possess excellent thermal stability, a feature that renders them highly favorable for optoelectronic applications with an elevated thermal budget. Employing a coevaporation approach for their deposition holds promise for manufacturing at an industrial level, owing to improvements in device scalability and reproducibility. For unlocking the full potential of vacuum-evaporated perovskite thin films, it is crucial to delve deeper into their crystallization process, which, as a solid-state reaction, has been less investigated compared to the crystallization process of, most commonly used, solution-based methods.

Toward Thin-Film Laser Diodes with Metal Halide Perovskites.

Metal halide perovskite semiconductors hold a strong promise for enabling thin-film laser diodes. Perovskites distinguish themselves from other non-epitaxial media primarily through their ability to maintain performance at high current densities, which is a critical requirement for achieving injection lasing. Coming in a wide range of varieties, numerous perovskites delivered low-threshold optical amplified spontaneous emission and optically pumped lasing when combined with a suitable optical cavity.

Image sensors using thin-film absorbers.

Image sensors are must-have components of most consumer electronics devices. They enable portable camera systems, which find their way into billions of devices annually. Such high volumes are possible thanks to the complementary metal-oxide semiconductor (CMOS) platform, leveraging wafer-scale manufacturing.

Photonic metamaterial with a subwavelength electrode pattern.

The next generation of tunable photonics requires highly conductive and light inert interconnects that enable fast switching of phase, amplitude, and polarization modulators without reducing their efficiency. As such, metallic electrodes should be avoided, as they introduce significant parasitic losses. Transparent conductive oxides, on the other hand, offer reduced absorption due to their high bandgap and good conductivity due to their relatively high carrier concentration.

Electric Field-Induced Quenching of MAPbI Photoluminescence in PeLED Architecture.

Photoluminescence (PL) measurements are a widely used technique for the investigation of perovskite-based materials and devices. Although electric field-induced PL quenching provides additional useful information, this phenomenon is quite complex and not yet clearly understood. Here, we address the PL quenching of methylammonium lead iodide (MAPbI) perovskite in a light-emitting diode (PeLED) architecture.

A Thermally Activated Delayed Fluorescence Green OLED with 4500 h Lifetime and 20% External Quantum Efficiency by Optimizing the Emission Zone using a Single-Emission Spectrum Technique.

Device optimization of light-emitting diodes (LEDs) targets the most efficient conversion of electrically injected charges into emitted light. The emission zone in an LED is where charges recombine and light is emitted from. It is believed that the emission zone is strongly linked to device efficiency and lifetime.

Improving the Morphology Stability of Spiro-OMeTAD Films for Enhanced Thermal Stability of Perovskite Solar Cells.

To guarantee a long lifetime of perovskite-based photovoltaics, the selected materials need to survive relatively high-temperature stress during the solar cell operation. Highly efficient n-i-p perovskite solar cells (PSCs) often degrade at high operational temperatures due to morphological instability of the hole transport material 2,2',7,7'-tetrakis (,-di--methoxyphenyl-amine)9,9'-spirobifluorene (Spiro-OMeTAD). We discovered that the detrimental large-domain spiro-OMeTAD crystallization is caused by the simultaneous presence of -butylpyridine (BP) additive and gold (Au) as a capping layer.

All-Evaporated, All-Inorganic CsPbI Perovskite-Based Devices for Broad-Band Photodetector and Solar Cell Applications.

Following the rapid increase of organic metal halide perovskites toward commercial application in thin-film solar cells, inorganic alternatives attracted great interest with their potential of longer device lifetime due to the stability improvement under increased temperatures and moisture ingress. Among them, cesium lead iodide (CsPbI) has gained significant attention due to similar electronic and optical properties to methylammonium lead iodide (MAPbI), with a band gap of 1.7 eV, high absorption coefficient, and large diffusion length, while also offering the advantage of being completely inorganic, providing a higher thermal stability and preventing material degradation.

Touchscreen tags based on thin-film electronics for the Internet of Everything.

Capacitive touchscreens are increasingly widespread, featuring in mobile phones and tablets, as well as everyday objects such as cars and home appliances. As a result, the interfaces are uniquely placed to provide a means of communication in the era of the Internet of Everything. Here we show that commercial touchscreens can be used as reader interfaces for capacitive coupled data transfer.

Model for the Prediction of the Lifetime and Energy Yield of Methyl Ammonium Lead Iodide Perovskite Solar Cells at Elevated Temperatures.

With the realization of highly efficient perovskite solar cells, the long-term stability of these devices is the key challenge hindering their commercialization. In this work, we study the temperature-dependent stability of perovskite solar cells and develop a model capable of predicting the lifetime and energy yield of perovskite solar cells outdoors. This model results from the measurement of the kinetics governing the degradation of perovskite solar cells at elevated temperatures.

Outdoor Measurement and Modeling of Perovskite Module Temperatures.

Photovoltaic cells and modules are exposed to partially rapid changing environmental parameters that influence the device temperature. The evolution of the device temperature of a perovskite module of 225 cm area is presented during a period of 25 days under central European conditions. The temperature of the glass-glass packaged perovskite solar module is directly measured at the back contact by a thermocouple.

Temperature Variation-Induced Performance Decline of Perovskite Solar Cells.

This paper reports on the impact of outdoor temperature variations on the performance of organo metal halide perovskite solar cells (PSCs). It shows that the open-circuit voltage ( V) of a PSC decreases linearly with increasing temperature. Interestingly, in contrast to these expected trends, the current density ( J) of PSCs is found to decline strongly below 20% of the initial value upon cycling the temperatures from 10 to 60 °C and back.

The Influence of Alkoxy Substitutions on the Properties of Diketopyrrolopyrrole-Phenyl Copolymers for Solar Cells.

A previously reported diketopyrrolopyrrole (DPP)-phenyl copolymer is modified by adding methoxy or octyloxy side chains on the phenyl spacer. The influence of these alkoxy substitutions on the physical, opto-electronic properties, and photovoltaic performance were investigated. It was found that the altered physical properties correlated with an increase in chain flexibility.

Light extraction from surface plasmons and waveguide modes in an organic light-emitting layer by nanoimprinted gratings.

Organic light-emitting diodes (OLEDs) usually exhibit a low light outcoupling efficiency because a large fraction of power is lost to surface plasmons (SPs) and waveguide modes. In this paper it is demonstrated that periodic grating structures with almost µm-scale can be used to extract SPs as well as waveguide modes and therefore enhance the outcoupling efficiency in light-emitting thin film structures. The gratings are fabricated by nanoimprint lithography using a commercially available diffraction grating as a mold which is pressed into a polymer resist.